X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fsuvd3.h;h=fddba92389c0f5774fdd20f5044d9613f47397e7;hb=ad970756208864de4b353b77bfb04c0fb4fc5ab5;hp=ae197018b81ddf6a2734c3f8a51bd199ab52a437;hpb=7d6a098219f8473ca4653cce5f7a49672b967f36;p=u-boot

diff --git a/include/configs/suvd3.h b/include/configs/suvd3.h
index ae197018b8..fddba92389 100644
--- a/include/configs/suvd3.h
+++ b/include/configs/suvd3.h
@@ -11,10 +11,7 @@
  * (C) Copyright 2010
  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -23,19 +20,28 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_SUVD3		/* SUVD3 board specific */
-#define CONFIG_HOSTNAME		suvd3
-#define CONFIG_KM_BOARD_NAME   "suvd3"
 
+/* This needs to be set prior to including km/km83xx-common.h */
 #define	CONFIG_SYS_TEXT_BASE	0xF0000000
 
+#if defined(CONFIG_SUVD3)	/* SUVD3 board specific */
+#define CONFIG_HOSTNAME		suvd3
+#define CONFIG_KM_BOARD_NAME   "suvd3"
 /* include common defines/options for all 8321 Keymile boards */
 #include "km/km8321-common.h"
+#elif defined(CONFIG_KMVECT1)   /* VECT1 board specific */
+#define CONFIG_HOSTNAME		kmvect1
+#define CONFIG_KM_BOARD_NAME   "kmvect1"
+/* include common defines/options for all 8309 Keymile boards */
+#include "km/km8309-common.h"
+#else
+#error Supported boards are: SUVD3, KMVECT1
+#endif
 
 #define CONFIG_SYS_APP1_BASE		0xA0000000
-#define	CONFIG_SYS_APP1_SIZE		256 /* Megabytes */
+#define CONFIG_SYS_APP1_SIZE		256 /* Megabytes */
 #define CONFIG_SYS_APP2_BASE		0xB0000000
-#define	CONFIG_SYS_APP2_SIZE		256 /* Megabytes */
+#define CONFIG_SYS_APP2_SIZE		256 /* Megabytes */
 
 /* EEprom support */
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
@@ -101,4 +107,41 @@
 				 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 #define CONFIG_SYS_DBAT6U	CONFIG_SYS_IBAT6U
 
+/*
+ * QE UEC ethernet configuration
+ */
+#if defined(CONFIG_KMVECT1)
+#define CONFIG_MV88E6352_SWITCH
+#define CONFIG_KM_MVEXTSW_ADDR		0x10
+
+/* ethernet port connected to simple switch 88e6122 (UEC0) */
+#define CONFIG_UEC_ETH1
+#define CONFIG_SYS_UEC1_UCC_NUM		0	/* UCC1 */
+#define CONFIG_SYS_UEC1_RX_CLK		QE_CLK9
+#define CONFIG_SYS_UEC1_TX_CLK		QE_CLK10
+
+#define CONFIG_FIXED_PHY		0xFFFFFFFF
+#define CONFIG_SYS_FIXED_PHY_ADDR	0x1E	/* unused address */
+#define CONFIG_SYS_FIXED_PHY_PORT(devnum, speed, duplex) \
+		{devnum, speed, duplex}
+#define CONFIG_SYS_FIXED_PHY_PORTS \
+		CONFIG_SYS_FIXED_PHY_PORT("UEC0", SPEED_100, DUPLEX_FULL)
+
+#define CONFIG_SYS_UEC1_ETH_TYPE	FAST_ETH
+#define CONFIG_SYS_UEC1_PHY_ADDR	CONFIG_SYS_FIXED_PHY_ADDR
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE	PHY_INTERFACE_MODE_MII
+#define CONFIG_SYS_UEC1_INTERFACE_SPEED	100
+
+/* ethernet port connected to piggy (UEC2) */
+#define CONFIG_HAS_ETH1
+#define CONFIG_UEC_ETH2
+#define CONFIG_SYS_UEC2_UCC_NUM		2       /* UCC3 */
+#define CONFIG_SYS_UEC2_RX_CLK		QE_CLK_NONE /* not used in RMII Mode */
+#define CONFIG_SYS_UEC2_TX_CLK		QE_CLK12
+#define CONFIG_SYS_UEC2_ETH_TYPE	FAST_ETH
+#define CONFIG_SYS_UEC2_PHY_ADDR	0
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE	PHY_INTERFACE_MODE_RMII
+#define CONFIG_SYS_UEC2_INTERFACE_SPEED	100
+#endif /* CONFIG_KMVECT1 */
+
 #endif /* __CONFIG_H */