X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Ftao3530.h;h=061610d4c1fdafabde506e4e1699eeb67f444fc4;hb=44ab2d325b79d3ce6123495c5ce52410655a58fb;hp=ae6c768c229517f34f8b9e0404c157f72a1b7a1e;hpb=1d1ab61c326635ca1088dbd54e5bf023cac9bfc6;p=u-boot

diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h
index ae6c768c22..061610d4c1 100644
--- a/include/configs/tao3530.h
+++ b/include/configs/tao3530.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Configuration settings for the TechNexion TAO-3530 SOM
  * equipped on Thunder baseboard.
@@ -6,8 +7,6 @@
  * Tapani Utriainen <linuxfae@technexion.com>
  *
  * Copyright (C) 2013 Stefan Roese <sr@denx.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -17,8 +16,6 @@
  * High Level Configuration Options
  */
 
-#define CONFIG_SDRC			/* Has an SDRC controller */
-
 #include <asm/arch/cpu.h>		/* get chip and board defs */
 #include <asm/arch/omap.h>
 
@@ -55,26 +52,15 @@
 /*
  * select serial console configuration
  */
-#define CONFIG_CONS_INDEX		3
 #define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 
 /* commands to include */
-#define CONFIG_CMD_MTDPARTS	/* Enable MTD parts commands */
 #define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
-#define MTDIDS_DEFAULT			"nand0=nand"
-#define MTDPARTS_DEFAULT		"mtdparts=nand:512k(x-loader),"\
-					"1920k(u-boot),128k(u-boot-env),"\
-					"4m(kernel),-(fs)"
-
-#define CONFIG_CMD_NAND		/* NAND support			*/
 
 #define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_OMAP34XX
-#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
 #define CONFIG_I2C_MULTI_BUS
 
 /*
@@ -85,7 +71,6 @@
 /*
  * Board NAND Info.
  */
-#define CONFIG_NAND_OMAP_GPMC
 #define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
 							/* to access nand */
 #define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
@@ -94,7 +79,6 @@
 
 #define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of NAND */
 							/* devices */
-#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 /* Environment information */
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
@@ -151,21 +135,9 @@
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP		/* undef to save memory */
-#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
 
 /* turn on command-line edit/hist/auto */
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_AUTO_COMPLETE
-
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)
 
-#define CONFIG_SYS_ALT_MEMTEST		1
 #define CONFIG_SYS_MEMTEST_START	(0x82000000)		/* memtest */
 								/* defaults */
 #define CONFIG_SYS_MEMTEST_END		(0x83FFFFFF)		/* 64MB */
@@ -173,7 +145,6 @@
 
 #define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0)	/* default */
 							/* load address */
-#define CONFIG_SYS_TEXT_BASE		0x80008000
 
 /*
  * OMAP3 has 12 GP timers, they can be driven by the system clock
@@ -203,12 +174,10 @@
 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_ONENAND_BASE		ONENAND_MAP
 
-#define CONFIG_ENV_IS_IN_NAND		1
 #define ONENAND_ENV_OFFSET		0x260000 /* environment starts here */
-#define SMNAND_ENV_OFFSET		0x260000 /* environment starts here */
 
 #define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)
-#define CONFIG_ENV_OFFSET		SMNAND_ENV_OFFSET
+#define CONFIG_ENV_OFFSET		0x260000
 #define CONFIG_ENV_ADDR			CONFIG_ENV_OFFSET
 
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
@@ -218,8 +187,6 @@
 					 CONFIG_SYS_INIT_RAM_SIZE - \
 					 GENERATED_GBL_DATA_SIZE)
 
-#define CONFIG_OMAP3_SPI
-
 /*
  * USB
  *
@@ -230,26 +197,14 @@
 /* USB EHCI */
 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO	162
 
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_SMSC95XX
-
-#define CONFIG_USB_ETHER
-#define CONFIG_USB_ETHER_RNDIS
-
 /* Defines for SPL */
-#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_NAND_SIMPLE
 
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
 
-#define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
-#define CONFIG_SPL_OMAP3_ID_NAND
-#define CONFIG_SPL_LDSCRIPT		"arch/arm/mach-omap2/u-boot-spl.lds"
 
 /* NAND boot config */
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
@@ -280,7 +235,6 @@
  * older x-loader implementations. And move the BSS area so that it
  * doesn't overlap with TEXT_BASE.
  */
-#define CONFIG_SYS_TEXT_BASE		0x80008000
 #define CONFIG_SPL_BSS_START_ADDR	0x80100000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000		/* 512 KB */