X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Ftheadorable.h;h=a7001e76aaac672bb844f006c6ee603af0c00e9d;hb=f07d76c00d1fe05baad1599d01d07a9226498923;hp=a5a7fae1282f29bcfa1e8efdea2564ec27e1d65b;hpb=cb04db155f4e7ccaec1b961d8a84e1a1b9524594;p=u-boot

diff --git a/include/configs/theadorable.h b/include/configs/theadorable.h
index a5a7fae128..a7001e76aa 100644
--- a/include/configs/theadorable.h
+++ b/include/configs/theadorable.h
@@ -23,23 +23,12 @@
 /*
  * Commands configuration
  */
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_ENV
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_EXT4
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_FS_GENERIC
-#define CONFIG_CMD_SATA
 
 /*
  * The debugging version enables USB support via defconfig.
  * This version should also enable all other non-production
  * interfaces / features.
  */
-#ifdef CONFIG_USB
-#define CONFIG_CMD_PCI
-#endif
 
 /* I2C */
 #define CONFIG_SYS_I2C
@@ -53,14 +42,11 @@
 #define CONFIG_EHCI_IS_TDI
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 3
 
-#define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
-
 /* SPI NOR flash default params, used by sf commands */
 #define CONFIG_SF_DEFAULT_SPEED		27777777 /* for fast SPL booting */
 #define CONFIG_SF_DEFAULT_MODE		SPI_MODE_3
 
 /* Environment in SPI NOR flash */
-#define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_OFFSET		(1 << 20) /* 1MiB in */
 #define CONFIG_ENV_SIZE			(64 << 10) /* 64KiB */
 #define CONFIG_ENV_SECT_SIZE		(256 << 10) /* 256KiB sectors */
@@ -69,7 +55,6 @@
 #define CONFIG_PHY_MARVELL		/* there is a marvell phy */
 #define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */
 
-#define CONFIG_SYS_CONSOLE_INFO_QUIET	/* don't print console @ startup */
 #define CONFIG_SYS_ALT_MEMTEST
 #define CONFIG_PREBOOT
 
@@ -83,8 +68,6 @@
 #define CONFIG_SATA_MV
 #define CONFIG_LIBATA
 #define CONFIG_LBA48
-#define CONFIG_EFI_PARTITION
-#define CONFIG_DOS_PARTITION
 
 /* Additional FS support/configuration */
 #define CONFIG_SUPPORT_VFAT
@@ -92,24 +75,14 @@
 /* PCIe support */
 #ifdef CONFIG_CMD_PCI
 #ifndef CONFIG_SPL_BUILD
-#define CONFIG_PCI
 #define CONFIG_PCI_MVEBU
-#define CONFIG_PCI_PNP
-#define CONFIG_BOARD_LATE_INIT		/* for PEX switch test */
 #endif
 #endif
 
 /* Enable LCD and reserve 512KB from top of memory*/
 #define CONFIG_SYS_MEM_TOP_HIDE		0x80000
 
-#define CONFIG_VIDEO
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_CMD_BMP
-
 /* FPGA programming support */
-#define CONFIG_FPGA
-#define CONFIG_FPGA_ALTERA
 #define CONFIG_FPGA_STRATIX_V
 
 /*
@@ -155,17 +128,8 @@
 #define CONFIG_SPL_STACK		(0x40000000 + ((192 - 16) << 10))
 #define CONFIG_SPL_BOOTROM_SAVE		(CONFIG_SPL_STACK + 4)
 
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
-
 /* SPL related SPI defines */
-#define CONFIG_SPL_SPI_SUPPORT
-#define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SPL_SPI_LOAD
-#define CONFIG_SPL_SPI_BUS		0
-#define CONFIG_SPL_SPI_CS		0
 #define CONFIG_SYS_SPI_U_BOOT_OFFS	0x1a000
 #define CONFIG_SYS_U_BOOT_OFFS		CONFIG_SYS_SPI_U_BOOT_OFFS