X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fti_omap4_common.h;h=8994400de9b955dc6f62911e4025bbe8f7bd79a7;hb=8c1ce928f498774a3e2c3aa03534b6e6ca6d4759;hp=3d2992f737dc47477c4a37d4e5315283822627d9;hpb=4f892924d238cc415891dbea336a0fdaff2f853b;p=u-boot

diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h
index 3d2992f737..8994400de9 100644
--- a/include/configs/ti_omap4_common.h
+++ b/include/configs/ti_omap4_common.h
@@ -12,14 +12,8 @@
 #ifndef __CONFIG_TI_OMAP4_COMMON_H
 #define __CONFIG_TI_OMAP4_COMMON_H
 
-/*
- * High Level Configuration Options
- */
-#define CONFIG_OMAP4430		1	/* which is in a 4430 */
 #define CONFIG_MISC_INIT_R
 
-#define CONFIG_SYS_THUMB_BUILD
-
 #ifndef CONFIG_SYS_L2CACHE_OFF
 #define CONFIG_SYS_L2_PL310		1
 #define CONFIG_SYS_PL310_BASE	0x48242000
@@ -98,15 +92,20 @@
 	func(DHCP, dhcp, na)
 
 #define CONFIG_BOOTCOMMAND \
+	"if test ${boot_fit} -eq 1; then "	\
+		"run update_to_fit;"	\
+	"fi;"	\
 	"run findfdt; " \
 	"run envboot; " \
 	"run distro_bootcmd"
 
 #include <config_distro_bootcmd.h>
+#include <environment/ti/mmc.h>
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	DEFAULT_LINUX_BOOT_ENV \
 	DEFAULT_MMC_TI_ARGS \
+	DEFAULT_FIT_TI_ARGS \
 	"console=ttyO2,115200n8\0" \
 	"fdtfile=undefined\0" \
 	"bootpart=0:2\0" \
@@ -114,14 +113,7 @@
 	"bootfile=zImage\0" \
 	"usbtty=cdc_acm\0" \
 	"vram=16M\0" \
-	"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
 	"loaduimage=load mmc ${mmcdev} ${loadaddr} uImage\0" \
-	"mmcboot=echo Booting from mmc${mmcdev} ...; " \
-		"run args_mmc; " \
-		"if run loadimage; then " \
-			"run loadfdt; " \
-			"bootz ${loadaddr} - ${fdtaddr}; " \
-		"fi;\0" \
 	"uimageboot=echo Booting from mmc${mmcdev} ...; " \
 		"run args_mmc; " \
 		"bootm ${loadaddr}\0" \
@@ -138,7 +130,6 @@
 			"setenv fdtfile omap4-duovero-parlor.dtb; fi;" \
 		"if test $fdtfile = undefined; then " \
 			"echo WARNING: Could not determine device tree to use; fi; \0" \
-	"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
 	BOOTENV
 
 /*
@@ -148,18 +139,12 @@
  * So moving TEXT_BASE down to non-HS limit.
  */
 #define CONFIG_SPL_TEXT_BASE		0x40300000
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
 #define CONFIG_SYS_SPL_ARGS_ADDR	(CONFIG_SYS_SDRAM_BASE + \
 					 (128 << 20))
 
-#ifdef CONFIG_NAND
-#define CONFIG_SPL_NAND_AM33XX_BCH	/* ELM support */
-#endif
-
 #ifdef CONFIG_SPL_BUILD
 /* No need for i2c in SPL mode as we will use SRI2C for PMIC access on OMAP4 */
 #undef CONFIG_SYS_I2C
-#undef CONFIG_SYS_I2C_OMAP24XX
 #endif
 
 #endif /* __CONFIG_TI_OMAP4_COMMON_H */