X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Ftqma6.h;h=badb955241d18815ea88c3fdabe037c6fac1f58a;hb=89cb2b5f8be4f6d04bd87220aa8f72eb0850edc4;hp=e0c4ada711dde9b9a46294dd9e913cc50991969d;hpb=37f4d0ec34a4333ae9417c512faf7242e8ebeae3;p=u-boot

diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h
index e0c4ada711..badb955241 100644
--- a/include/configs/tqma6.h
+++ b/include/configs/tqma6.h
@@ -44,24 +44,22 @@
 #define CONFIG_MXC_UART
 
 /* SPI */
-#define CONFIG_CMD_SPI
 #define CONFIG_MXC_SPI
 
 /* SPI Flash */
-#define CONFIG_SPI_FLASH_STMICRO
 
 #define TQMA6_SPI_FLASH_SECTOR_SIZE	SZ_64K
 
-#define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_BUS	0
 #define CONFIG_SF_DEFAULT_CS	0
 #define CONFIG_SF_DEFAULT_SPEED	50000000
 #define CONFIG_SF_DEFAULT_MODE	(SPI_MODE_0)
 
 /* I2C Configs */
-#define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
 #define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 #define CONFIG_I2C_MULTI_BUS
 #define CONFIG_SYS_I2C_SPEED		100000
@@ -90,7 +88,6 @@
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 
 /* USB Configs */
-#define CONFIG_CMD_USB
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_MX6
 #define CONFIG_USB_STORAGE
@@ -100,14 +97,6 @@
 #define CONFIG_USB_MAX_CONTROLLER_COUNT	2
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET	/* For OTG port */
 
-/* Fuses */
-#define CONFIG_MXC_OCOTP
-#define CONFIG_CMD_FUSE
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
-
 #define CONFIG_FEC_MXC
 #define IMX_FEC_BASE			ENET_BASE_ADDR
 #define CONFIG_PHYLIB
@@ -290,7 +279,6 @@
 		"sf read ${${fdt_addr}} ${offset} ${size}; "                   \
 		"setenv size ; setenv offset\0"                                \
 
-
 #define CONFIG_BOOTCOMMAND                                                     \
 	"sf probe; run mmcboot; run netboot; run panicboot"                    \
 
@@ -381,11 +369,6 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-#define CONFIG_FIT
-#define CONFIG_FIT_VERBOSE
-
 /*
  * All the defines above are for the TQMa6 SoM
  *
@@ -393,6 +376,8 @@
  */
 #ifdef CONFIG_MBA6
 #include "tqma6_mba6.h"
+#elif CONFIG_WRU4
+#include "tqma6_wru4.h"
 #else
 #error "No baseboard for the TQMa6 defined!"
 #endif