X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Ftrab.h;h=9827195e8d59102ece270f38839844046f6c28f8;hb=9844d027b52cc89264f6bf7686e26d9dc50134fd;hp=43c191b4356c1e87f30ff7aaa7f5fde2c0320ba8;hpb=d3870bd2d832ea2048b7cb2bbb9d642585b137cf;p=u-boot

diff --git a/include/configs/trab.h b/include/configs/trab.h
index 43c191b435..9827195e8d 100644
--- a/include/configs/trab.h
+++ b/include/configs/trab.h
@@ -40,10 +40,11 @@
  * High Level Configuration Options
  * (easy to change)
  */
-#define CONFIG_ARM920T		1	/* This is an arm920t CPU	*/
-#define CONFIG_S3C2400		1	/* in a SAMSUNG S3C2400 SoC	*/
-#define CONFIG_TRAB		1	/* on a TRAB Board		*/
-#undef CONFIG_TRAB_50MHZ		/* run the CPU at 50 MHz	*/
+#define CONFIG_ARM920T	1	/* This is an arm920t CPU	*/
+#define CONFIG_S3C24X0	1	/* in a SAMSUNG S3C24x0-type SoC	*/
+#define CONFIG_S3C2400	1	/* specifically a SAMSUNG S3C2400 SoC	*/
+#define CONFIG_TRAB	1	/* on a TRAB Board		*/
+#undef CONFIG_TRAB_50MHZ	/* run the CPU at 50 MHz	*/
 
 /* automatic software updates (see board/trab/auto_update.c) */
 #define CONFIG_AUTO_UPDATE	1
@@ -320,17 +321,7 @@
 
 #define	CONFIG_SYS_LOAD_ADDR		0x0CF00000	/* default load address	*/
 
-#ifdef CONFIG_TRAB_50MHZ
-/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */
-/* it to wrap 100 times (total 1562500) to get 1 sec. */
-/* this should _really_ be calculated !! */
-#define	CONFIG_SYS_HZ			1562500
-#else
-/* the PWM TImer 4 uses a counter of 10390 for 10 ms, so we need */
-/* it to wrap 100 times (total 1039000) to get 1 sec. */
-/* this should _really_ be calculated !! */
-#define	CONFIG_SYS_HZ			1039000
-#endif
+#define	CONFIG_SYS_HZ			1000
 
 /* valid baudrates */
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }