X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Ftrizepsiv.h;h=8368931e7b7a605d55f085afdba11d6275c734c7;hb=10a28644941327dc26760bc06294a5f588b46d30;hp=af464e1bea3d68c20fe7d41fca009ea8defce1ce;hpb=c786f54b9ace5d7b20a0404a7deb1bae683cd4e8;p=u-boot

diff --git a/include/configs/trizepsiv.h b/include/configs/trizepsiv.h
index af464e1bea..8368931e7b 100644
--- a/include/configs/trizepsiv.h
+++ b/include/configs/trizepsiv.h
@@ -14,23 +14,7 @@
  *
  * Configuation settings for the LUBBOCK board.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -46,8 +30,6 @@
 #define CONFIG_BOARD_LATE_INIT
 #define	CONFIG_SYS_TEXT_BASE	0x0
 
-#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */
-
 /* we will never enable dcache, because we have to setup MMU first */
 #define CONFIG_SYS_DCACHE_OFF
 
@@ -66,10 +48,10 @@
  * select serial console configuration
  */
 #define CONFIG_PXA_SERIAL
-#define CONFIG_SERIAL_MULTI
 #define CONFIG_FFUART	       1       /* we use FFUART on Conxs */
 #define CONFIG_BTUART	       1       /* we use BTUART on Conxs */
 #define CONFIG_STUART	       1       /* we use STUART on Conxs */
+#define CONFIG_CONS_INDEX	3
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
@@ -81,10 +63,7 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_FAT
-#define CONFIG_CMD_IMLS
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_USB
 
@@ -143,20 +122,17 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
 #endif
 
 /*
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_HUSH_PARSER		1
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
 #define CONFIG_SYS_LONGHELP				/* undef to save memory		*/
 #ifdef CONFIG_SYS_HUSH_PARSER
 #define CONFIG_SYS_PROMPT		"$ "		/* Monitor Command Prompt */
 #else
-#define CONFIG_SYS_PROMPT		"=> "		/* Monitor Command Prompt */
 #endif
 #define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
@@ -169,29 +145,15 @@
 
 #define CONFIG_SYS_LOAD_ADDR		0xa1000000	/* default load address */
 
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_CPUSPEED		0x207		/* need to look more closely, I think this is Turbo = 2x, L=91Mhz */
 
-						/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 #ifdef CONFIG_MMC
-#define CONFIG_PXA_MMC
+#define	CONFIG_GENERIC_MMC
+#define	CONFIG_PXA_MMC_GENERIC
 #define CONFIG_CMD_MMC
 #define CONFIG_SYS_MMC_BASE		0xF0000000
 #endif
 
-/*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
-#endif
-
 /*
  * Physical Memory Map
  */