X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Funiphier.h;h=df89d14cc3a0a9f58d5e90b5f74dd39bb34bd827;hb=7287d5f091c97a38a8820b45aaee123d6bbef12f;hp=dd022fb52da88ff7121a5cb7c283eda0191c9acd;hpb=3bfbf32b6fe5e2d4605bc7ee99d1844b572662c2;p=u-boot

diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h
index dd022fb52d..df89d14cc3 100644
--- a/include/configs/uniphier.h
+++ b/include/configs/uniphier.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2012-2014 Panasonic Corporation
+ * Copyright (C) 2012-2015 Panasonic Corporation
  *   Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+
@@ -43,6 +43,9 @@
 #define CONFIG_SDRAM1_SIZE	0x10000000
 #endif
 
+#define CONFIG_I2C_EEPROM
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  10
+
 /*
  * Support card address map
  */
@@ -77,8 +80,6 @@
 #define CONFIG_SMC911X_BASE		CONFIG_SUPPORT_CARD_ETHER_BASE
 #define CONFIG_SMC911X_32_BIT
 
-#define CONFIG_SYS_MALLOC_F_LEN  0x2000
-
 /*-----------------------------------------------------------------------
  * MMU and Cache Setting
  *----------------------------------------------------------------------*/
@@ -87,11 +88,15 @@
 /* #define CONFIG_SYS_ICACHE_OFF */
 /* #define CONFIG_SYS_DCACHE_OFF */
 
+#define CONFIG_SYS_CACHELINE_SIZE	32
+
 /* Comment out the following to enable L2 cache */
 #define CONFIG_UNIPHIER_L2CACHE_ON
 
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_MISC_INIT_F
+#define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOARD_EARLY_INIT_R
 #define CONFIG_BOARD_LATE_INIT
 
@@ -183,6 +188,7 @@
 
 /* USB */
 #define CONFIG_USB_MAX_CONTROLLER_COUNT		2
+#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS	4
 #define CONFIG_CMD_FAT
 #define CONFIG_FAT_WRITE
 #define CONFIG_DOS_PARTITION
@@ -230,11 +236,16 @@
 	"image_offset=0x00080000\0"		\
 	"image_size=0x00f00000\0"		\
 	"verify=n\0"				\
-	"norboot=run add_default_bootargs;"				\
+	"nandupdate=nand erase 0 0x100000 &&"				\
+		   "tftpboot u-boot-spl.bin &&"				\
+		   "nand write $loadaddr 0 0x10000 &&"			\
+		   "tftpboot u-boot-dtb.img &&"				\
+		   "nand write $loadaddr 0x10000 0xf0000\0"		\
+	"norboot=run add_default_bootargs &&"				\
 		"bootm $image_offset\0"					\
-	"nandboot=run add_default_bootargs;"				\
-		"nand read $loadaddr $image_offset $image_size;"	\
-		"bootm\0"						\
+	"nandboot=run add_default_bootargs &&"				\
+		 "nand read $loadaddr $image_offset $image_size &&"	\
+		 "bootm\0"						\
 	"add_default_bootargs=setenv bootargs $bootargs"		\
 		" console=ttyS0,$baudrate\0"				\
 
@@ -264,8 +275,6 @@
 #define CONFIG_SPL_TEXT_BASE		0x00100000
 #endif
 
-#define CONFIG_BOARD_POSTCLK_INIT
-
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #endif
@@ -273,7 +282,11 @@
 #define CONFIG_SYS_SPL_MALLOC_START	(0x0ff00000)
 #define CONFIG_SYS_SPL_MALLOC_SIZE	(0x00004000)
 
+#ifdef CONFIG_SPL_BUILD
 #define CONFIG_SYS_INIT_SP_ADDR		(0x0ff08000)
+#else
+#define CONFIG_SYS_INIT_SP_ADDR		((CONFIG_SYS_TEXT_BASE) - 0x00001000)
+#endif
 
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_NAND_SUPPORT