X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fvf610twr.h;h=80a501e560134c0ba70b8b85731b10588344b0d0;hb=eff0c977b3b9466657362869e04da231a892e31e;hp=20f0d6eafcff64358c61a69c45512c411b067136;hpb=c27269953b94d19b3fc7a21a1c3e19985507b94d;p=u-boot

diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h
index 20f0d6eafc..80a501e560 100644
--- a/include/configs/vf610twr.h
+++ b/include/configs/vf610twr.h
@@ -11,8 +11,6 @@
 
 #include <asm/arch/imx-regs.h>
 
-#define CONFIG_VF610
-
 #define CONFIG_SYS_FSL_CLK
 
 #define CONFIG_MACH_TYPE		4146
@@ -22,7 +20,6 @@
 /* Enable passing of ATAGs */
 #define CONFIG_CMDLINE_TAG
 
-#define CONFIG_CMD_FUSE
 #ifdef CONFIG_CMD_FUSE
 #define CONFIG_MXC_OCOTP
 #endif
@@ -30,56 +27,30 @@
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * 1024 * 1024)
 
-#define CONFIG_BOARD_EARLY_INIT_F
-
 /* Allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE			115200
 
 /* NAND support */
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_NAND_TRIMFFS
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 
 #ifdef CONFIG_CMD_NAND
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		NFC_BASE_ADDR
 
-/* UBI */
-#define CONFIG_CMD_UBIFS
-#define CONFIG_RBTREE
-#define CONFIG_LZO
-
 /* Dynamic MTD partition support */
-#define CONFIG_CMD_MTDPARTS
 #define CONFIG_MTD_PARTITIONS
 #define CONFIG_MTD_DEVICE
-#define MTDIDS_DEFAULT			"nand0=fsl_nfc"
-#define MTDPARTS_DEFAULT		"mtdparts=fsl_nfc:"		\
-					"128k(vf-bcb)ro,"		\
-					"1408k(u-boot)ro,"		\
-					"512k(u-boot-env),"		\
-					"4m(kernel),"			\
-					"512k(fdt),"		\
-					"-(rootfs)"
 #endif
 
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 #define CONFIG_SYS_FSL_ESDHC_NUM	1
 
-#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
-
-#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
-
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 #define IMX_FEC_BASE			ENET_BASE_ADDR
 #define CONFIG_FEC_XCV_TYPE		RMII
 #define CONFIG_FEC_MXC_PHYADDR          0
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_MICREL
 
 /* QSPI Configs*/
 
@@ -100,8 +71,7 @@
 #define CONFIG_SYS_LOAD_ADDR		0x82000000
 
 /* We boot from the gfxRAM area of the OCRAM. */
-#define CONFIG_SYS_TEXT_BASE		0x3f408000
-#define CONFIG_BOARD_SIZE_LIMIT		524288
+#define CONFIG_BOARD_SIZE_LIMIT		520192
 
 /*
  * We do have 128MB of memory on the Vybrid Tower board. Leave the last
@@ -208,23 +178,10 @@
 	   "else run netboot; fi"
 
 /* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP		/* undef to save memory */
-#undef CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE		\
-			(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 
 #define CONFIG_SYS_MEMTEST_START	0x80010000
 #define CONFIG_SYS_MEMTEST_END		0x87C00000
 
-/*
- * Stack sizes
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE		(128 * 1024)	/* regular stack */
-
 /* Physical memory map */
 #define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM			(0x80000000)
@@ -239,9 +196,6 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-/* FLASH and environment organization */
-#define CONFIG_SYS_NO_FLASH
-
 #ifdef CONFIG_ENV_IS_IN_MMC
 #define CONFIG_ENV_SIZE			(8 * 1024)