X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fvinco.h;h=0084051ba167d7079a1a9bae0cc98221c9b02088;hb=38d2831d3b1bc618c36fcba855368e9ac239f3cc;hp=35fe9de146ac8fbfdfdc8f00ddff433d6e817243;hpb=f4c6f9335c1e867862dcebcfa9c05b2e3dd05636;p=u-boot

diff --git a/include/configs/vinco.h b/include/configs/vinco.h
index 35fe9de146..0084051ba1 100644
--- a/include/configs/vinco.h
+++ b/include/configs/vinco.h
@@ -13,9 +13,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-/* No NOR flash, this definition should be put before common header */
-#define CONFIG_SYS_NO_FLASH
-
 #include "at91-sama5_common.h"
 
 /* The value in the common file is too far away for the VInCo platform */
@@ -26,12 +23,15 @@
 
 /* serial console */
 #define CONFIG_ATMEL_USART
-#define CONFIG_USART_BASE		ATMEL_BASE_USART3
-#define	CONFIG_USART_ID			ATMEL_ID_USART3
+#define CONFIG_USART_BASE		0xfc00c000
+#define CONFIG_USART_ID			30
+
+/* Timer */
+#define CONFIG_SYS_TIMER_COUNTER	0xfc06863c
 
 /* SDRAM */
 #define CONFIG_NR_DRAM_BANKS		1
-#define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_DDRCS
+#define CONFIG_SYS_SDRAM_BASE           0x20000000
 #define CONFIG_SYS_SDRAM_SIZE		0x4000000
 
 #define CONFIG_SYS_INIT_SP_ADDR \
@@ -57,37 +57,15 @@
 
 #ifdef CONFIG_CMD_MMC
 #define CONFIG_SUPPORT_EMMC_BOOT
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
 #define CONFIG_GENERIC_ATMEL_MCI
-#define ATMEL_BASE_MMCI			ATMEL_BASE_MCI1
+#define ATMEL_BASE_MMCI			0xfc000000
 #define CONFIG_SYS_MMC_CLK_OD		500000
 
 /* For generating MMC partitions */
-#define CONFIG_PARTITION_UUIDS
-#define CONFIG_RANDOM_UUID
-#define CONFIG_EFI_PARTITION
-#define CONFIG_CMD_GPT
-
-#endif
-
-/* USB */
 
-#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_ATMEL
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	3
-#define CONFIG_USB_STORAGE
 #endif
 
 /* USB device */
-#define CONFIG_USB_ETHER
-#define CONFIG_USB_ETH_RNDIS
-#define CONFIG_USBNET_MANUFACTURER      "L+G VInCo"
-
-#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
-#define CONFIG_DOS_PARTITION
-#endif
 
 /* Ethernet Hardware */
 #define CONFIG_PHY_SMSC
@@ -96,11 +74,7 @@
 #define CONFIG_NET_RETRY_COUNT		20
 #define CONFIG_MACB_SEARCH_PHY
 
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_SMSC95XX
-#define CONFIG_USB_ETHER_RNDIS
-
-#ifdef CONFIG_SYS_USE_SERIALFLASH
+#ifdef CONFIG_SPI_BOOT
 /* bootstrap + u-boot + env + linux in serial flash */
 #define CONFIG_ENV_SPI_BUS	CONFIG_SF_DEFAULT_BUS
 #define CONFIG_ENV_SPI_CS	CONFIG_SF_DEFAULT_CS
@@ -118,9 +92,6 @@
 			    "mmc read ${oftaddr} ${dtb_offset} ${dtb_blksize};" \
 			    "bootz ${loadaddr} -  ${oftaddr}"
 
-#undef CONFIG_BOOTARGS
-#define CONFIG_BOOTARGS	    "console=ttyS0,115200 earlyprintk rw root=/dev/mmcblk0p2 rootfstype=ext4 rootwait quiet lpj=1990656"
-
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"kernel_start=0x20000\0" \
 	"kernel_size=0x800000\0" \
@@ -150,6 +121,5 @@
 	"bootdelay=0\0"
 
 #endif
-#define CONFIG_ZERO_BOOTDELAY_CHECK
 
 #endif