X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fvme8349.h;h=0d8ae0b099b63457d76086241887a92184f1feda;hb=e883ffe00b6db807544c70e743cf7832d5d56d40;hp=13ebafeac86e4878ff58ee6d34a5f5ca21b5863a;hpb=2218b32d88f9b4b4484cea9a8b034ddab0be298b;p=u-boot

diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h
index 13ebafeac8..0d8ae0b099 100644
--- a/include/configs/vme8349.h
+++ b/include/configs/vme8349.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * esd vme8349 U-Boot configuration file
  * Copyright (c) 2008, 2009 esd gmbh Hannover Germany
@@ -7,8 +8,6 @@
  *
  * reinhard.arlt@esd-electronics.de
  * Based on the MPC8349EMDS config.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 /*
@@ -33,8 +32,6 @@
 #define CONFIG_MPC8349		1	/* MPC8349 specific */
 #define CONFIG_VME8349		1	/* ESD VME8349 board specific */
 
-#define	CONFIG_SYS_TEXT_BASE	0xFFF00000
-
 #define CONFIG_MISC_INIT_R
 
 /* Don't enable PCI2 on vme834x - it doesn't exist physically. */
@@ -196,7 +193,6 @@
 /*
  * Serial Port
  */
-#define CONFIG_CONS_INDEX	1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
@@ -207,9 +203,6 @@
 #define CONFIG_SYS_NS16550_COM1		(CONFIG_SYS_IMMR + 0x4500)
 #define CONFIG_SYS_NS16550_COM2		(CONFIG_SYS_IMMR + 0x4600)
 
-#define CONFIG_CMDLINE_EDITING		/* add command line history	*/
-#define CONFIG_AUTO_COMPLETE		/* add autocompletion support */
-
 /* I2C */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_FSL
@@ -284,10 +277,6 @@
 /*
  * TSEC configuration
  */
-#ifdef VME_CADDY2
-#else
-#define CONFIG_TSEC_ENET		/* TSEC ethernet support */
-#endif
 
 #if defined(CONFIG_TSEC_ENET)
 
@@ -333,9 +322,6 @@
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
 
 /*
  * Command line configuration.
@@ -343,11 +329,6 @@
 #define CONFIG_SYS_RTC_BUS_NUM  0x01
 #define CONFIG_SYS_I2C_RTC_ADDR	0x32
 #define CONFIG_RTC_RX8025
-#define CONFIG_CMD_TSI148
-
-#if defined(CONFIG_PCI)
-    #define CONFIG_CMD_PCI
-#endif
 
 /* Pass Ethernet MAC to VxWorks */
 #define CONFIG_SYS_VXWORKS_MAC_PTR	0x000043f0
@@ -357,19 +338,8 @@
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory */
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
 
-#if defined(CONFIG_CMD_KGDB)
-	#define CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size */
-#else
-	#define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
-#endif
-
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS	16		/* max num of command args */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE /* Boot Argument Buf Size */
-
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 256 MB of memory, since this is
@@ -524,14 +494,12 @@
 #define CONFIG_HAS_ETH1
 #endif
 
-#define CONFIG_HOSTNAME		VME8349
+#define CONFIG_HOSTNAME		"VME8349"
 #define CONFIG_ROOTPATH		"/tftpboot/rootfs"
 #define CONFIG_BOOTFILE		"uImage"
 
 #define CONFIG_LOADADDR		800000	/* def location for tftp and bootm */
 
-#undef  CONFIG_BOOTARGS			/* boot command will set bootargs */
-
 #define	CONFIG_EXTRA_ENV_SETTINGS					\
 	"netdev=eth0\0"							\
 	"hostname=vme8349\0"						\