X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fwoodburn_common.h;h=7fec24c65cc32fac35b9fed037fb6cf8e0e5d742;hb=38045f54478f8272aa21079fc75cc647ab0b9179;hp=c7a17f7a49d3809693e047f4975125f34f1886fe;hpb=21008ad6384170767041f1608975473c5ffa7fc7;p=u-boot

diff --git a/include/configs/woodburn_common.h b/include/configs/woodburn_common.h
index c7a17f7a49..7fec24c65c 100644
--- a/include/configs/woodburn_common.h
+++ b/include/configs/woodburn_common.h
@@ -16,16 +16,9 @@
  /* High Level Configuration Options */
 #define CONFIG_MX35
 #define CONFIG_MX35_HCLK_FREQ	24000000
+#define CONFIG_SYS_FSL_CLK
 
 #define CONFIG_SYS_DCACHE_OFF
-#define CONFIG_SYS_CACHELINE_SIZE	32
-
-#define CONFIG_DISPLAY_CPUINFO
-
-/* Only in case the value is not present in mach-types.h */
-#ifndef MACH_TYPE_FLEA3
-#define MACH_TYPE_FLEA3                3668
-#endif
 
 #define CONFIG_MACH_TYPE		MACH_TYPE_FLEA3
 
@@ -46,6 +39,9 @@
  */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
+#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 #define CONFIG_SYS_SPD_BUS_NUM		0
 #define CONFIG_MXC_SPI
 #define CONFIG_MXC_GPIO
@@ -58,10 +54,7 @@
 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR	0x8
 #define CONFIG_RTC_MC13XXX
 
-
 /* mmc driver */
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 #define CONFIG_SYS_FSL_ESDHC_NUM	1
@@ -80,40 +73,20 @@
 /*
  * Command definition
  */
-
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
 #define CONFIG_BOOTP_SUBNETMASK
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_DNS
 
 #define CONFIG_CMD_NAND
-#define CONFIG_CMD_CACHE
-
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_SPI
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
-
-#define CONFIG_CMD_MMC
-#define CONFIG_DOS_PARTITION
-#define CONFIG_EFI_PARTITION
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
 
-#define CONFIG_CMD_GPIO
 #define CONFIG_MXC_GPIO
 
 #define CONFIG_NET_RETRY_COUNT	100
 
-#define CONFIG_BOOTDELAY	3
 
 #define CONFIG_LOADADDR		0x80800000	/* loadaddr env var */
 
-
 /*
  * Ethernet on SOC (FEC)
  */
@@ -132,9 +105,7 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP	/* undef to save memory */
-#define CONFIG_SYS_PROMPT	"woodburn U-Boot > "
 #define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_HUSH_PARSER	/* Use the HUSH parser */
 
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
@@ -146,8 +117,6 @@
 #define CONFIG_SYS_MEMTEST_START	0	/* memtest works on */
 #define CONFIG_SYS_MEMTEST_END		0x10000
 
-#undef	CONFIG_SYS_CLKS_IN_HZ	/* everything, incl board info, in Hz */
-
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 
 /*