X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fwork_92105.h;h=f7a3df103d7a61e3d766ab0f29d6bac67817be28;hb=3146f0c017df2231d03dff09cee31f7bd63db3e5;hp=4725fc3d895116988d9ddd7fd521af99e74b420b;hpb=a84988c76d1dbca2dbe870d6b4f0ad398f287f85;p=u-boot

diff --git a/include/configs/work_92105.h b/include/configs/work_92105.h
index 4725fc3d89..f7a3df103d 100644
--- a/include/configs/work_92105.h
+++ b/include/configs/work_92105.h
@@ -18,15 +18,13 @@
  * Define work_92105 machine type by hand -- done only for compatibility
  * with original board code
  */
-#define MACH_TYPE_WORK_92105		736
-#define CONFIG_MACH_TYPE		MACH_TYPE_WORK_92105
+#define CONFIG_MACH_TYPE		736
 
 #define CONFIG_SYS_ICACHE_OFF
 #define CONFIG_SYS_DCACHE_OFF
 #if !defined(CONFIG_SPL_BUILD)
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #endif
-#define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOARD_EARLY_INIT_R
 
 /* generate LPC32XX-specific SPL image */
@@ -52,7 +50,6 @@
  * Serial Driver
  */
 #define CONFIG_SYS_LPC32XX_UART		5   /* UART5 - NS16550 */
-#define CONFIG_BAUDRATE			115200
 
 /*
  * Ethernet Driver
@@ -60,12 +57,8 @@
 
 #define CONFIG_PHY_SMSC
 #define CONFIG_LPC32XX_ETH
-#define CONFIG_PHYLIB
 #define CONFIG_PHY_ADDR 0
 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
 /* FIXME: remove "Waiting for PHY auto negotiation to complete..." message */
 
 /*
@@ -74,14 +67,12 @@
 
 #define CONFIG_SYS_I2C_LPC32XX
 #define CONFIG_SYS_I2C
-#define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C_SPEED 350000
 
 /*
  * I2C EEPROM
  */
 
-#define CONFIG_CMD_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x56
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
 
@@ -89,21 +80,11 @@
  * I2C RTC
  */
 
-#define CONFIG_CMD_DATE
 #define CONFIG_RTC_DS1374
 
-/*
- * I2C Temperature Sensor (DTT)
- */
-
-#define CONFIG_CMD_DTT
-#define CONFIG_DTT_SENSORS { 0, 1 }
-#define CONFIG_DTT_DS620
-
 /*
  * U-Boot General Configurations
  */
-#define CONFIG_SYS_GENERIC_BOARD
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_SYS_CBSIZE		1024
 #define CONFIG_SYS_PBSIZE		\
@@ -111,19 +92,8 @@
 #define CONFIG_SYS_MAXARGS		16
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 
-#define CONFIG_SYS_HUSH_PARSER
-
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_CMDLINE_EDITING
-#define CONFIG_VERSION_VARIABLE
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DOS_PARTITION
-
-/*
- * No NOR
- */
-
-#define CONFIG_SYS_NO_FLASH
 
 /*
  * NAND chip timings for FIXME: which one?
@@ -148,39 +118,28 @@
 #define CONFIG_SYS_NAND_BASE MLC_NAND_BASE
 #define CONFIG_NAND_LPC32XX_MLC
 
-#define CONFIG_CMD_NAND
-
 /*
  * GPIO
  */
 
-#define CONFIG_CMD_GPIO
 #define CONFIG_LPC32XX_GPIO
 
 /*
  * SSP/SPI/DISPLAY
  */
 
-#define CONFIG_CMD_SPI
 #define CONFIG_LPC32XX_SSP
 #define CONFIG_LPC32XX_SSP_TIMEOUT 100000
 #define CONFIG_CMD_MAX6957
-#define CONFIG_CMD_HD44760
 /*
  * Environment
  */
 
-#define CONFIG_ENV_IS_IN_NAND		1
 #define CONFIG_ENV_SIZE			0x00020000
 #define CONFIG_ENV_OFFSET		0x00100000
 #define CONFIG_ENV_OFFSET_REDUND	0x00120000
 #define CONFIG_ENV_ADDR			0x80000100
 
-/*
- * U-Boot Commands
- */
-#include <config_cmd_default.h>
-
 /*
  * Boot Linux
  */
@@ -188,9 +147,6 @@
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
 
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-#define CONFIG_BOOTDELAY		3
-
 #define CONFIG_BOOTFILE			"uImage"
 #define CONFIG_BOOTARGS			"console=ttyS2,115200n8"
 #define CONFIG_LOADADDR			0x80008000
@@ -203,15 +159,10 @@
 #define CONFIG_SPL_TEXT_BASE 0x00000000
 /* SPL will use SRAM as stack */
 #define CONFIG_SPL_STACK     0x0000FFF8
-#define CONFIG_SPL_BOARD_INIT
 /* Use the framework and generic lib */
 #define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
 /* SPL will use serial */
-#define CONFIG_SPL_SERIAL_SUPPORT
 /* SPL will load U-Boot from NAND offset 0x40000 */
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_BOOT