X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fx600.h;h=748e3317a7ef550c394594e624eb9a0e9aea3eac;hb=fc5d54b7fa3fa602e06e2f0863c0b134d6afca70;hp=9a8a7c7dd02ebe75316566e2dab790402fd162b5;hpb=adad96e60d0eb1bbc4d0b96c89decf385a426e42;p=u-boot

diff --git a/include/configs/x600.h b/include/configs/x600.h
index 9a8a7c7dd0..748e3317a7 100644
--- a/include/configs/x600.h
+++ b/include/configs/x600.h
@@ -80,12 +80,13 @@
 #define CONFIG_PHY_RESET_DELAY			10000		/* in usec */
 #define CONFIG_PHY_ADDR		0	/* PHY address */
 #define CONFIG_PHY_GIGE			/* Include GbE speed/duplex detection */
+#define CONFIG_PHY_MICREL
+#define CONFIG_PHY_MICREL_KSZ9031
 
 #define CONFIG_SPEAR_GPIO
 
 /* I2C config options */
 #define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_DW
 #define CONFIG_SYS_I2C_BASE			0xD0200000
 #define CONFIG_SYS_I2C_SPEED			400000
 #define CONFIG_SYS_I2C_SLAVE			0x02
@@ -109,30 +110,20 @@
 /*
  * Command support defines
  */
-#define CONFIG_CMD_CACHE
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_ENV
-#define CONFIG_CMD_FAT
 #define CONFIG_CMD_FPGA_LOADMK
-#define CONFIG_CMD_FS_GENERIC
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
 #define CONFIG_CMD_MTDPARTS
 #define CONFIG_CMD_NAND
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_SAVES
 #define CONFIG_CMD_UBI
 #define CONFIG_CMD_UBIFS
-#define CONFIG_CMD_USB
 #define CONFIG_LZO
 
 /* Filesystem support (for USB key) */
 #define CONFIG_SUPPORT_VFAT
 #define CONFIG_DOS_PARTITION
 
-#define CONFIG_BOOTDELAY			3
-
 
 /*
  * U-Boot Environment placing definitions.
@@ -153,9 +144,7 @@
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_MISC_INIT_R
 #define CONFIG_BOARD_LATE_INIT
-#define CONFIG_LOOPW			/* enable loopw command         */
 #define CONFIG_MX_CYCLIC		/* enable mdc/mwc commands      */
-#define CONFIG_ZERO_BOOTDELAY_CHECK
 
 #define CONFIG_SYS_MEMTEST_START		0x00800000
 #define CONFIG_SYS_MEMTEST_END			0x04000000