X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fx600.h;h=748e3317a7ef550c394594e624eb9a0e9aea3eac;hb=fd42e1b589b5ae7e89dc327a70e5852999a23aeb;hp=73ba67c3e910d977f4e2ff252ccca2b1b2b39810;hpb=850f788709cef8f7d53d571aec3bfb73b14c5531;p=u-boot

diff --git a/include/configs/x600.h b/include/configs/x600.h
index 73ba67c3e9..748e3317a7 100644
--- a/include/configs/x600.h
+++ b/include/configs/x600.h
@@ -16,7 +16,6 @@
  */
 #define CONFIG_SPEAR600				/* SPEAr600 SoC */
 #define CONFIG_X600				/* on X600 board */
-#define CONFIG_SYS_GENERIC_BOARD
 #define CONFIG_SYS_THUMB_BUILD
 
 #include <asm/arch/hardware.h>
@@ -78,16 +77,16 @@
 
 /* Ethernet config options */
 #define CONFIG_MII
-#define CONFIG_PHYLIB
 #define CONFIG_PHY_RESET_DELAY			10000		/* in usec */
 #define CONFIG_PHY_ADDR		0	/* PHY address */
 #define CONFIG_PHY_GIGE			/* Include GbE speed/duplex detection */
+#define CONFIG_PHY_MICREL
+#define CONFIG_PHY_MICREL_KSZ9031
 
 #define CONFIG_SPEAR_GPIO
 
 /* I2C config options */
 #define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_DW
 #define CONFIG_SYS_I2C_BASE			0xD0200000
 #define CONFIG_SYS_I2C_SPEED			400000
 #define CONFIG_SYS_I2C_SLAVE			0x02
@@ -111,33 +110,20 @@
 /*
  * Command support defines
  */
-#define CONFIG_CMD_CACHE
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_ENV
-#define CONFIG_CMD_FAT
 #define CONFIG_CMD_FPGA_LOADMK
-#define CONFIG_CMD_FS_GENERIC
-#define CONFIG_CMD_GPIO
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
 #define CONFIG_CMD_MTDPARTS
 #define CONFIG_CMD_NAND
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_SAVES
 #define CONFIG_CMD_UBI
 #define CONFIG_CMD_UBIFS
-#define CONFIG_CMD_USB
 #define CONFIG_LZO
 
 /* Filesystem support (for USB key) */
 #define CONFIG_SUPPORT_VFAT
 #define CONFIG_DOS_PARTITION
 
-#define CONFIG_BOOTDELAY			3
-
-#define CONFIG_SYS_HUSH_PARSER			/* Use the HUSH parser	*/
-#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
 /*
  * U-Boot Environment placing definitions.
@@ -155,13 +141,10 @@
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_BOOT_PARAMS_ADDR			0x00000100
 #define CONFIG_CMDLINE_TAG
-#define CONFIG_OF_LIBFDT		/* enable passing of devicetree */
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_MISC_INIT_R
 #define CONFIG_BOARD_LATE_INIT
-#define CONFIG_LOOPW			/* enable loopw command         */
 #define CONFIG_MX_CYCLIC		/* enable mdc/mwc commands      */
-#define CONFIG_ZERO_BOOTDELAY_CHECK
 
 #define CONFIG_SYS_MEMTEST_START		0x00800000
 #define CONFIG_SYS_MEMTEST_END			0x04000000