X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fxilinx-ppc.h;h=39c1bd89d895c0995a8ff4e2c8244f8e90487b81;hb=66669fcf809c1e3ff644b12e04e625d3737ffd8e;hp=6bd6be86e1a91cff97003070e5d0af76409783cd;hpb=a69fdc7787bfa2f27eed74c2ee58c28ce932d502;p=u-boot

diff --git a/include/configs/xilinx-ppc.h b/include/configs/xilinx-ppc.h
index 6bd6be86e1..39c1bd89d8 100644
--- a/include/configs/xilinx-ppc.h
+++ b/include/configs/xilinx-ppc.h
@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2008
- *  Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ *  Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com
  *  This work has been supported by: QTechnology  http://qtec.com/
  *
  *  (C) Copyright 2008
@@ -12,8 +12,6 @@
 #ifndef __CONFIG_XLX_H
 #define __CONFIG_XLX_H
 
-#define CONFIG_SYS_GENERIC_BOARD
-
 /*
 #define DEBUG
 #define ET_DEBUG
@@ -26,22 +24,15 @@
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128 * 1024)
 
 /*Cmd*/
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_CACHE
 #define CONFIG_CMD_DIAG
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_REGINFO
 #undef CONFIG_CMD_JFFS2
 #undef CONFIG_CMD_MTDPARTS
-#undef CONFIG_CMD_SPI
-#undef CONFIG_CMD_I2C
 #undef CONFIG_CMD_DTT
-#undef CONFIG_CMD_PING
-#undef CONFIG_CMD_DHCP
 #undef CONFIG_CMD_EEPROM
 
 /*Misc*/
-#define CONFIG_BOOTDELAY		5/* autoboot after 5 seconds     */
 #define CONFIG_SYS_LONGHELP		/* undef to save memory         */
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE		1024/* Console I/O Buffer Size      */
@@ -65,12 +56,9 @@
 					/* decrementer freq: 1 ms ticks */
 #define CONFIG_CMDLINE_EDITING		/* add command line history     */
 #define CONFIG_AUTO_COMPLETE		/* add autocompletion support   */
-#define CONFIG_LOOPW			/* enable loopw command         */
 #define CONFIG_MX_CYCLIC		/* enable mdc/mwc commands      */
-#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 #define CONFIG_VERSION_VARIABLE		/* include version env variable */
 #define CONFIG_SYS_CONSOLE_INFO_QUIET	/* don't print console @ startup */
-#define CONFIG_SYS_HUSH_PARSER		/* Use the HUSH parser          */
 #define CONFIG_LOADS_ECHO		/* echo on for serial download  */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change        */
 #define CONFIG_SYS_BOOTMAPSZ		(8 << 20)
@@ -102,23 +90,9 @@
 #define CONFIG_SYS_NO_FLASH
 #endif
 
-/* serial communication */
-#ifdef XPAR_UARTLITE_0_BASEADDR
-#define CONFIG_XILINX_UARTLITE
-#define XILINX_UARTLITE_BASEADDR	XPAR_UARTLITE_0_BASEADDR
-#define CONFIG_BAUDRATE			XPAR_UARTLITE_0_BAUDRATE
-#define CONFIG_SYS_BAUDRATE_TABLE	{ CONFIG_BAUDRATE }
-#else
-#ifdef XPAR_UARTNS550_0_BASEADDR
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	4
-#define CONFIG_CONS_INDEX		1
-#define CONFIG_SYS_NS16550_COM1		XPAR_UARTNS550_0_BASEADDR
-#define CONFIG_SYS_NS16550_CLK		XPAR_UARTNS550_0_CLOCK_FREQ_HZ
 #define CONFIG_BAUDRATE			115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 115200 }
-#endif
-#endif
+/* The following table includes the supported baudrates */
+# define CONFIG_SYS_BAUDRATE_TABLE \
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
 
 #endif						/* __CONFIG_H */