X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fxupv2p.h;h=c9320c287c2273e6608150cbd8f216214070450f;hb=7232a2724ccc9dcbc3ec4ef84ada02f13ccd1238;hp=a2f48102f0ca676d9a06f51e47e2618df6b111e0;hpb=e8aac8e7bfc7cfdef5780f8f1d4c85184f59a06f;p=u-boot

diff --git a/include/configs/xupv2p.h b/include/configs/xupv2p.h
index a2f48102f0..c9320c287c 100644
--- a/include/configs/xupv2p.h
+++ b/include/configs/xupv2p.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2007 Czech Technical University.
+ * (C) Copyright 2007 Michal Simek
  *
  * Michal SIMEK <monstr@monstr.eu>
  *
@@ -31,6 +31,7 @@
 #define	CONFIG_XUPV2P		1
 
 /* uart */
+#define	CONFIG_XILINX_UARTLITE
 #define	CONFIG_SERIAL_BASE	XILINX_UART_BASEADDR
 #define	CONFIG_BAUDRATE		XILINX_UART_BAUDRATE
 #define	CFG_BAUDRATE_TABLE	{ CONFIG_BAUDRATE }
@@ -48,11 +49,13 @@
  * U-BOOT auto-relocate to TEXT_BASE. After RESET command Microblaze
  * jump to CFG_RESET_ADDRESS where is the original U-BOOT code.
  */
-#define	CFG_RESET_ADDRESS	0x36000000
+/* #define	CFG_RESET_ADDRESS	0x36000000 */
 
 /* gpio */
+#ifdef XILINX_GPIO_BASEADDR
 #define	CFG_GPIO_0		1
 #define	CFG_GPIO_0_ADDR		XILINX_GPIO_BASEADDR
+#endif
 
 /* interrupt controller */
 #define	CFG_INTC_0		1
@@ -65,6 +68,7 @@
 #define	CFG_TIMER_0_IRQ		XILINX_TIMER_IRQ
 #define	FREQUENCE		XILINX_CLOCK_FREQ
 #define	CFG_TIMER_0_PRELOAD	( FREQUENCE/1000 )
+#define	CONFIG_XILINX_CLOCK_FREQ	XILINX_CLOCK_FREQ
 
 /*
  * memory layout - Example
@@ -118,25 +122,32 @@
 #define	CFG_ENV_IS_NOWHERE	1
 #define	CFG_ENV_SIZE		0x1000
 #define	CFG_ENV_ADDR		(CFG_MONITOR_BASE - CFG_ENV_SIZE)
-#define	CONFIG_COMMANDS	(CONFIG__CMD_DFL |\
-			CFG_CMD_MEMORY |\
-			CFG_CMD_IRQ |\
-			CFG_CMD_BDI |\
-			CFG_CMD_NET |\
-			CFG_CMD_IMI |\
-			CFG_CMD_ECHO |\
-			CFG_CMD_CACHE |\
-			CFG_CMD_RUN |\
-			CFG_CMD_AUTOSCRIPT |\
-			CFG_CMD_ASKENV |\
-			CFG_CMD_LOADS |\
-			CFG_CMD_LOADB |\
-			CFG_CMD_MISC |\
-			CFG_CMD_PING \
-			)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_PING
+
+#ifdef XILINX_SYSACE_BASEADDR
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#endif
 
 /* Miscellaneous configurable options */
 #define	CFG_PROMPT	"U-Boot-mONStR> "
@@ -148,7 +159,7 @@
 
 #define	CONFIG_BOOTDELAY 	30
 #define	CONFIG_BOOTARGS		"root=romfs"
-#define	CONFIG_HOSTNAME		"ml401"
+#define	CONFIG_HOSTNAME		"xupv2p"
 #define	CONFIG_BOOTCOMMAND 	"base 0;tftp 11000000 image.img;bootm"
 #define	CONFIG_IPADDR		192.168.0.3
 #define	CONFIG_SERVERIP 	192.168.0.5
@@ -163,12 +174,14 @@
 	"base 0;" \
 	"echo"
 
-
 /* system ace */
-/*#define	CONFIG_SYSTEMACE
-#define	DEBUG_SYSTEMACE
-#define	CFG_SYSTEMACE_BASE	0xCF000000
-#define	CFG_SYSTEMACE_WIDTH	16
-#define	CONFIG_DOS_PARTITION*/
+#ifdef XILINX_SYSACE_BASEADDR
+#define	CONFIG_SYSTEMACE
+/* #define DEBUG_SYSTEMACE */
+#define	SYSTEMACE_CONFIG_FPGA
+#define	CFG_SYSTEMACE_BASE	XILINX_SYSACE_BASEADDR
+#define	CFG_SYSTEMACE_WIDTH	XILINX_SYSACE_MEM_WIDTH
+#define	CONFIG_DOS_PARTITION
+#endif
 
 #endif	/* __CONFIG_H */