X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fzmx25.h;h=5b940349babf474b704cd40857220a7089eeb1a6;hb=b0cf733933c3bc1b4ab353e16affabc60f863db5;hp=599d5bb42aacc9f3a9b24106b958f27a763c6acc;hpb=1086c5d6f8541460f0f10e4a302d8aac27e0e6e0;p=u-boot

diff --git a/include/configs/zmx25.h b/include/configs/zmx25.h
index 599d5bb42a..5b940349ba 100644
--- a/include/configs/zmx25.h
+++ b/include/configs/zmx25.h
@@ -4,35 +4,21 @@
  *
  * Configuation settings for the zmx25 board
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_ARM926EJS			/* arm926ejs CPU core */
+#include <asm/arch/imx-regs.h>
+
 #define CONFIG_MX25
-#define CONFIG_MX25_CLK32		32768	/* OSC32K frequency */
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_TEXT_BASE		0xA0000000
 
-#define CONFIG_MACH_TYPE	MACH_TYPE_ZMX25
+#define CONFIG_SYS_TIMER_RATE		32768
+#define CONFIG_SYS_TIMER_COUNTER	\
+	(&((struct gpt_regs *)IMX_GPT1_BASE)->counter)
+
 /*
  * Environment settings
  */
@@ -46,7 +32,6 @@
 #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs	*/
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
-#define CONFIG_BOARD_LATE_INIT
 
 /*
  * Compressions
@@ -69,7 +54,6 @@
 #define CONFIG_MXC_UART_BASE	UART2_BASE
 #define CONFIG_CONS_INDEX	1	/* use UART2 for console */
 #define CONFIG_BAUDRATE		115200	/* Default baud rate */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Ethernet
@@ -89,23 +73,10 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_CACHE
-
-#define CONFIG_SYS_64BIT_VSPRINTF
 
 /*
  * Additional command
  */
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_USB
-
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 
 /*
  * USB
@@ -114,12 +85,10 @@
 #define CONFIG_USB_EHCI			/* Enable EHCI USB support */
 #define CONFIG_USB_EHCI_MXC
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_MXC_USB_PORT	2
-#define CONFIG_MXC_USB_PORTSC	0xC0000000
-#define CONFIG_MXC_USB_FLAGS	0
+#define CONFIG_MXC_USB_PORT	1
+#define CONFIG_MXC_USB_PORTSC	MXC_EHCI_MODE_SERIAL
+#define CONFIG_MXC_USB_FLAGS	(MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN)
 #define CONFIG_EHCI_IS_TDI
-#define CONFIG_USB_STORAGE
-#define CONFIG_DOS_PARTITION
 #define CONFIG_SUPPORT_VFAT
 #endif /* CONFIG_CMD_USB */
 
@@ -155,7 +124,6 @@
 #define CONFIG_SYS_MEMTEST_START	(PHYS_SDRAM + (512*1024))
 #define CONFIG_SYS_MEMTEST_END		(PHYS_SDRAM + PHYS_SDRAM_SIZE)
 
-#define CONFIG_SYS_PROMPT	"zmx25> "
 #define CONFIG_SYS_CBSIZE	256
 #define CONFIG_SYS_MAXARGS	16
 #define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + \
@@ -165,16 +133,10 @@
 
 #define CONFIG_PREBOOT  ""
 
-#define CONFIG_BOOTDELAY	5
-#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT "boot in %d s\n", bootdelay
-#define CONFIG_AUTOBOOT_DELAY_STR	"delaygs"
-#define CONFIG_AUTOBOOT_STOP_STR	"stopgs"
 
 /*
  * Size of malloc() pool
  */
 #define CONFIG_SYS_MALLOC_LEN		(0x400000 - 0x8000)
-#define CONFIG_STACKSIZE		(32*1024)	/* regular stack */
 
 #endif	/* __CONFIG_H */