X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fconfigs%2Fzynq-common.h;h=87b4fffeb9fb262143edaae2599220c04255a959;hb=7a7ffedabd29adde9cb6ebe6066256c4cf8b77af;hp=0a7d104bf804df40e113d359f28d822fce9e7466;hpb=47b35a516b60de6c1055fab3a866a1e70bf12f6b;p=u-boot

diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index 0a7d104bf8..87b4fffeb9 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -10,10 +10,6 @@
 #ifndef __CONFIG_ZYNQ_COMMON_H
 #define __CONFIG_ZYNQ_COMMON_H
 
-/* High Level configuration Options */
-#define CONFIG_ARMV7
-#define CONFIG_ZYNQ
-
 /* CPU clock */
 #ifndef CONFIG_CPU_FREQ_HZ
 # define CONFIG_CPU_FREQ_HZ	800000000
@@ -102,6 +98,8 @@
 # define CONFIG_CMD_EXT2
 # define CONFIG_FAT_WRITE
 # define CONFIG_DOS_PARTITION
+# define CONFIG_CMD_EXT4
+# define CONFIG_CMD_EXT4_WRITE
 #endif
 
 #define CONFIG_SYS_I2C_ZYNQ
@@ -186,7 +184,7 @@
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CLOCKS
 #define CONFIG_CMD_CLK
-#define CONFIG_SYS_MAXARGS		15 /* max number of command args */
+#define CONFIG_SYS_MAXARGS		32 /* max number of command args */
 #define CONFIG_SYS_CBSIZE		256 /* Console I/O Buffer Size */
 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
 					sizeof(CONFIG_SYS_PROMPT) + 16)
@@ -212,6 +210,10 @@
 #define CONFIG_FPGA_XILINX
 #define CONFIG_FPGA_ZYNQPL
 #define CONFIG_CMD_FPGA
+#define CONFIG_CMD_FPGA_LOADMK
+#define CONFIG_CMD_FPGA_LOADP
+#define CONFIG_CMD_FPGA_LOADBP
+#define CONFIG_CMD_FPGA_LOADFS
 
 /* Open Firmware flat tree */
 #define CONFIG_OF_LIBFDT
@@ -219,10 +221,9 @@
 /* FIT support */
 #define CONFIG_FIT
 #define CONFIG_FIT_VERBOSE	1 /* enable fit_format_{error,warning}() */
+#define CONFIG_IMAGE_FORMAT_LEGACY /* enable also legacy image format */
 
 /* FDT support */
-#define CONFIG_OF_CONTROL
-#define CONFIG_OF_SEPARATE
 #define CONFIG_DISPLAY_BOARDINFO_LATE
 
 /* RSA support */
@@ -250,7 +251,6 @@
 #define CONFIG_CMD_TFTPPUT
 
 /* SPL part */
-#define CONFIG_SPL
 #define CONFIG_CMD_SPL
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
@@ -260,29 +260,28 @@
 
 #define CONFIG_SPL_LDSCRIPT	"arch/arm/cpu/armv7/zynq/u-boot-spl.lds"
 
-/* Disable dcache for SPL just for sure */
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_DCACHE_OFF
-#undef CONFIG_FPGA
-#undef CONFIG_OF_CONTROL
-#endif
-
 /* MMC support */
 #ifdef CONFIG_ZYNQ_SDHCI0
 #define CONFIG_SPL_MMC_SUPPORT
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      0x200 /* 256 KB */
-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION    1
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
 #define CONFIG_SPL_LIBDISK_SUPPORT
 #define CONFIG_SPL_FAT_SUPPORT
-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME     "u-boot.img"
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME     "u-boot-dtb.img"
+#endif
+
+/* Disable dcache for SPL just for sure */
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_DCACHE_OFF
+#undef CONFIG_FPGA
 #endif
 
 /* Address in RAM where the parameters must be copied by SPL. */
 #define CONFIG_SYS_SPL_ARGS_ADDR	0x10000000
 
-#define CONFIG_SPL_FAT_LOAD_ARGS_NAME		"system.dtb"
-#define CONFIG_SPL_FAT_LOAD_KERNEL_NAME		"uImage"
+#define CONFIG_SPL_FS_LOAD_ARGS_NAME		"system.dtb"
+#define CONFIG_SPL_FS_LOAD_KERNEL_NAME		"uImage"
 
 /* Not using MMC raw mode - just for compilation purpose */
 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0
@@ -294,9 +293,7 @@
 #define CONFIG_SPL_SPI_SUPPORT
 #define CONFIG_SPL_SPI_LOAD
 #define CONFIG_SPL_SPI_FLASH_SUPPORT
-#define CONFIG_SPL_SPI_BUS	0
 #define CONFIG_SYS_SPI_U_BOOT_OFFS	0x100000
-#define CONFIG_SPL_SPI_CS	0
 #endif
 
 /* for booting directly linux */
@@ -328,4 +325,6 @@
 
 #define CONFIG_SYS_UBOOT_START	CONFIG_SYS_TEXT_BASE
 
+#define CONFIG_SYS_GENERIC_BOARD
+
 #endif /* __CONFIG_ZYNQ_COMMON_H */