X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fcros_ec.h;h=3b2be2c2fa642dc91c8511f07b9960624f10f5b3;hb=dc9cdf859e11de775e75cc233b09d6b6d257a818;hp=8457c80c5efd4264e5943255dc35b83fd520581b;hpb=358b8bc204f365be28fed94f23e53e04183a8c7f;p=u-boot diff --git a/include/cros_ec.h b/include/cros_ec.h index 8457c80c5e..3b2be2c2fa 100644 --- a/include/cros_ec.h +++ b/include/cros_ec.h @@ -15,31 +15,9 @@ #include #include -#ifndef CONFIG_DM_CROS_EC -/* Which interface is the device on? */ -enum cros_ec_interface_t { - CROS_EC_IF_NONE, - CROS_EC_IF_SPI, - CROS_EC_IF_I2C, - CROS_EC_IF_LPC, /* Intel Low Pin Count interface */ - CROS_EC_IF_SANDBOX, -}; -#endif - /* Our configuration information */ struct cros_ec_dev { -#ifdef CONFIG_DM_CROS_EC struct udevice *dev; /* Transport device */ -#else - enum cros_ec_interface_t interface; - struct spi_slave *spi; /* Our SPI slave, if using SPI */ - int node; /* Our node */ - int parent_node; /* Our parent node (interface) */ - unsigned int cs; /* Our chip select */ - unsigned int addr; /* Device address (for I2C) */ - unsigned int bus_num; /* Bus number (for I2C) */ - unsigned int max_frequency; /* Maximum interface frequency */ -#endif struct gpio_desc ec_int; /* GPIO used as EC interrupt line */ int protocol_version; /* Protocol version to use */ int optimise_flash_write; /* Don't write erased flash blocks */ @@ -240,8 +218,6 @@ int cros_ec_flash_update_rw(struct cros_ec_dev *dev, */ struct cros_ec_dev *board_get_cros_ec_dev(void); -#ifdef CONFIG_DM_CROS_EC - struct dm_cros_ec_ops { int (*check_version)(struct udevice *dev); int (*command)(struct udevice *dev, uint8_t cmd, int cmd_version, @@ -255,112 +231,6 @@ struct dm_cros_ec_ops { int cros_ec_register(struct udevice *dev); -#else /* !CONFIG_DM_CROS_EC */ - -/* Internal interfaces */ -int cros_ec_i2c_init(struct cros_ec_dev *dev, const void *blob); -int cros_ec_spi_init(struct cros_ec_dev *dev, const void *blob); -int cros_ec_lpc_init(struct cros_ec_dev *dev, const void *blob); -int cros_ec_sandbox_init(struct cros_ec_dev *dev, const void *blob); - -/** - * Read information from the fdt for the i2c cros_ec interface - * - * @param dev CROS-EC device - * @param blob Device tree blob - * @return 0 if ok, -1 if we failed to read all required information - */ -int cros_ec_i2c_decode_fdt(struct cros_ec_dev *dev, const void *blob); - -/** - * Read information from the fdt for the spi cros_ec interface - * - * @param dev CROS-EC device - * @param blob Device tree blob - * @return 0 if ok, -1 if we failed to read all required information - */ -int cros_ec_spi_decode_fdt(struct cros_ec_dev *dev, const void *blob); - -/** - * Read information from the fdt for the sandbox cros_ec interface - * - * @param dev CROS-EC device - * @param blob Device tree blob - * @return 0 if ok, -1 if we failed to read all required information - */ -int cros_ec_sandbox_decode_fdt(struct cros_ec_dev *dev, const void *blob); - -/** - * Check whether the LPC interface supports new-style commands. - * - * LPC has its own way of doing this, which involves checking LPC values - * visible to the host. Do this, and update dev->protocol_version accordingly. - * - * @param dev CROS-EC device to check - */ -int cros_ec_lpc_check_version(struct cros_ec_dev *dev); - -/** - * Send a command to an I2C CROS-EC device and return the reply. - * - * This rather complicated function deals with sending both old-style and - * new-style commands. The old ones have just a command byte and arguments. - * The new ones have version, command, arg-len, [args], chksum so are 3 bytes - * longer. - * - * The device's internal input/output buffers are used. - * - * @param dev CROS-EC device - * @param cmd Command to send (EC_CMD_...) - * @param cmd_version Version of command to send (EC_VER_...) - * @param dout Output data (may be NULL If dout_len=0) - * @param dout_len Size of output data in bytes - * @param dinp Returns pointer to response data - * @param din_len Maximum size of response in bytes - * @return number of bytes in response, or -1 on error - */ -int cros_ec_i2c_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version, - const uint8_t *dout, int dout_len, - uint8_t **dinp, int din_len); - -/** - * Send a command to a LPC CROS-EC device and return the reply. - * - * The device's internal input/output buffers are used. - * - * @param dev CROS-EC device - * @param cmd Command to send (EC_CMD_...) - * @param cmd_version Version of command to send (EC_VER_...) - * @param dout Output data (may be NULL If dout_len=0) - * @param dout_len Size of output data in bytes - * @param dinp Returns pointer to response data - * @param din_len Maximum size of response in bytes - * @return number of bytes in response, or -1 on error - */ -int cros_ec_lpc_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version, - const uint8_t *dout, int dout_len, - uint8_t **dinp, int din_len); - -int cros_ec_spi_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version, - const uint8_t *dout, int dout_len, - uint8_t **dinp, int din_len); - -/** - * Send a packet to a CROS-EC device and return the response packet. - * - * Expects the request packet to be stored in dev->dout. Stores the response - * packet in dev->din. - * - * @param dev CROS-EC device - * @param out_bytes Size of request packet to output - * @param in_bytes Maximum size of response packet to receive - * @return number of bytes in response packet, or <0 on error - */ -int cros_ec_spi_packet(struct cros_ec_dev *dev, int out_bytes, int in_bytes); -int cros_ec_sandbox_packet(struct cros_ec_dev *dev, int out_bytes, - int in_bytes); -#endif - /** * Dump a block of data for a command. * @@ -492,13 +362,6 @@ int cros_ec_set_ldo(struct cros_ec_dev *dev, uint8_t index, uint8_t state); */ int cros_ec_get_ldo(struct cros_ec_dev *dev, uint8_t index, uint8_t *state); -/** - * Initialize the Chrome OS EC at board initialization time. - * - * @return 0 if ok, -ve on error - */ -int cros_ec_board_init(void); - /** * Get access to the error reported when cros_ec_board_init() was called *