X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fdwmmc.h;h=05b0817fe1e1834b10bef69f892bd3fdc3d083c6;hb=02499e4edc885b3064c76f8b6e84d9ff8d7a6b4b;hp=c9bdf51a6718fd7638f4168f324d6592bc63febb;hpb=82b9547387389cc4147596cb45609bf29d3fdbdb;p=u-boot

diff --git a/include/dwmmc.h b/include/dwmmc.h
index c9bdf51a67..05b0817fe1 100644
--- a/include/dwmmc.h
+++ b/include/dwmmc.h
@@ -105,6 +105,8 @@
 
 /* Status Register */
 #define DWMCI_BUSY		(1 << 9)
+#define DWMCI_FIFO_MASK		0x1ff
+#define DWMCI_FIFO_SHIFT	17
 
 /* FIFOTH Register */
 #define MSIZE(x)		((x) << 28)
@@ -123,28 +125,66 @@
 #define DWMCI_BMOD_IDMAC_FB	(1 << 1)
 #define DWMCI_BMOD_IDMAC_EN	(1 << 7)
 
+/* UHS register */
+#define DWMCI_DDR_MODE	(1 << 16)
+
 /* quirks */
 #define DWMCI_QUIRK_DISABLE_SMU		(1 << 0)
 
+/**
+ * struct dwmci_host - Information about a designware MMC host
+ *
+ * @name:	Device name
+ * @ioaddr:	Base I/O address of controller
+ * @quirks:	Quick flags - see DWMCI_QUIRK_...
+ * @caps:	Capabilities - see MMC_MODE_...
+ * @bus_hz:	Bus speed in Hz, if @get_mmc_clk() is NULL
+ * @div:	Arbitrary clock divider value for use by controller
+ * @dev_index:	Arbitrary device index for use by controller
+ * @dev_id:	Arbitrary device ID for use by controller
+ * @buswidth:	Bus width in bits (8 or 4)
+ * @fifoth_val:	Value for FIFOTH register (or 0 to leave unset)
+ * @mmc:	Pointer to generic MMC structure for this device
+ * @priv:	Private pointer for use by controller
+ */
 struct dwmci_host {
-	char *name;
+	const char *name;
 	void *ioaddr;
 	unsigned int quirks;
 	unsigned int caps;
 	unsigned int version;
 	unsigned int clock;
 	unsigned int bus_hz;
+	unsigned int div;
 	int dev_index;
+	int dev_id;
 	int buswidth;
-	u32 clksel_val;
 	u32 fifoth_val;
 	struct mmc *mmc;
+	void *priv;
 
 	void (*clksel)(struct dwmci_host *host);
 	void (*board_init)(struct dwmci_host *host);
-	unsigned int (*get_mmc_clk)(struct dwmci_host *host);
+
+	/**
+	 * Get / set a particular MMC clock frequency
+	 *
+	 * This is used to request the current clock frequency of the clock
+	 * that drives the DWMMC peripheral. The caller will then use this
+	 * information to work out the divider it needs to achieve the
+	 * required MMC bus clock frequency. If you want to handle the
+	 * clock external to DWMMC, use @freq to select the frequency and
+	 * return that value too. Then DWMMC will put itself in bypass mode.
+	 *
+	 * @host:	DWMMC host
+	 * @freq:	Frequency the host is trying to achieve
+	 */
+	unsigned int (*get_mmc_clk)(struct dwmci_host *host, uint freq);
 
 	struct mmc_config cfg;
+
+	/* use fifo mode to read and write data */
+	bool fifo_mode;
 };
 
 struct dwmci_idmac {
@@ -152,7 +192,7 @@ struct dwmci_idmac {
 	u32 cnt;
 	u32 addr;
 	u32 next_addr;
-};
+} __aligned(ARCH_DMA_MINALIGN);
 
 static inline void dwmci_writel(struct dwmci_host *host, int reg, u32 val)
 {