X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Ffdt_support.h;h=506bc5a9f690b0bb6c8ad108feb3e87056bbda04;hb=0405092bd21a44f5af22f17aeb0b82a0a11e1252;hp=c3d1fbcf3566451419bff1a325a870a945743475;hpb=1454ba8e56d88a8b95ac8050cde2c07c651cd0ae;p=u-boot diff --git a/include/fdt_support.h b/include/fdt_support.h index c3d1fbcf35..506bc5a9f6 100644 --- a/include/fdt_support.h +++ b/include/fdt_support.h @@ -16,8 +16,35 @@ u32 fdt_getprop_u32_default_node(const void *fdt, int off, int cell, const char *prop, const u32 dflt); u32 fdt_getprop_u32_default(const void *fdt, const char *path, const char *prop, const u32 dflt); + +/** + * Add data to the root of the FDT before booting the OS. + * + * See doc/device-tree-bindings/root.txt + * + * @param fdt FDT address in memory + * @return 0 if ok, or -FDT_ERR_... on error + */ +int fdt_root(void *fdt); + +/** + * Add chosen data the FDT before booting the OS. + * + * In particular, this adds the kernel command line (bootargs) to the FDT. + * + * @param fdt FDT address in memory + * @return 0 if ok, or -FDT_ERR_... on error + */ int fdt_chosen(void *fdt); + +/** + * Add initrd information to the FDT before booting the OS. + * + * @param fdt FDT address in memory + * @return 0 if ok, or -FDT_ERR_... on error + */ int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end); + void do_fixup_by_path(void *fdt, const char *path, const char *prop, const void *val, int len, int create); void do_fixup_by_path_u32(void *fdt, const char *path, const char *prop, @@ -40,18 +67,57 @@ void do_fixup_by_compat(void *fdt, const char *compat, const char *prop, const void *val, int len, int create); void do_fixup_by_compat_u32(void *fdt, const char *compat, const char *prop, u32 val, int create); +/** + * Setup the memory node in the DT. Creates one if none was existing before. + * Calls fdt_fixup_memory_banks() to populate a single reg pair covering the + * whole memory. + * + * @param blob FDT blob to update + * @param start Begin of DRAM mapping in physical memory + * @param size Size of the single memory bank + * @return 0 if ok, or -1 or -FDT_ERR_... on error + */ int fdt_fixup_memory(void *blob, u64 start, u64 size); + +/** + * Fill the DT memory node with multiple memory banks. + * Creates the node if none was existing before. + * If banks is 0, it will not touch the existing reg property. This allows + * boards to not mess with the existing DT setup, which may have been + * filled in properly before. + * + * @param blob FDT blob to update + * @param start Array of size to hold the start addresses. + * @param size Array of size to hold the size of each region. + * @param banks Number of memory banks to create. If 0, the reg + * property will be left untouched. + * @return 0 if ok, or -1 or -FDT_ERR_... on error + */ int fdt_fixup_memory_banks(void *blob, u64 start[], u64 size[], int banks); + void fdt_fixup_ethernet(void *fdt); int fdt_find_and_setprop(void *fdt, const char *node, const char *prop, const void *val, int len, int create); void fdt_fixup_qe_firmware(void *fdt); -#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) -void fdt_fixup_dr_usb(void *blob, bd_t *bd); +/** + * Update native-mode property of display-timings node to the phandle + * of the timings matching a display by name (case insensitive). + * + * see kernel Documentation/devicetree/bindings/video/display-timing.txt + * + * @param blob FDT blob to update + * @param path path within dt + * @param display name of display timing to match + * @return 0 if ok, or -FDT_ERR_... on error + */ +int fdt_fixup_display(void *blob, const char *path, const char *display); + +#if defined(CONFIG_USB_EHCI_FSL) || defined(CONFIG_USB_XHCI_FSL) +void fsl_fdt_fixup_dr_usb(void *blob, bd_t *bd); #else -static inline void fdt_fixup_dr_usb(void *blob, bd_t *bd) {} -#endif /* defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) */ +static inline void fsl_fdt_fixup_dr_usb(void *blob, bd_t *bd) {} +#endif /* defined(CONFIG_USB_EHCI_FSL) || defined(CONFIG_USB_XHCI_FSL) */ #if defined(CONFIG_SYS_FSL_SEC_COMPAT) void fdt_fixup_crypto_node(void *blob, int sec_rev); @@ -64,7 +130,20 @@ static inline void fdt_fixup_crypto_node(void *blob, int sec_rev) {} int fdt_pci_dma_ranges(void *blob, int phb_off, struct pci_controller *hose); #endif -void ft_board_setup(void *blob, bd_t *bd); +int fdt_find_or_add_subnode(void *fdt, int parentoffset, const char *name); + +/** + * Add board-specific data to the FDT before booting the OS. + * + * Use CONFIG_SYS_FDT_PAD to ensure there is sufficient space. + * This function is called if CONFIG_OF_BOARD_SETUP is defined + * + * @param blob FDT blob to update + * @param bd_t Pointer to board data + * @return 0 if ok, or -FDT_ERR_... on error + */ +int ft_board_setup(void *blob, bd_t *bd); + /* * The keystone2 SOC requires all 32 bit aliased addresses to be converted * to their 36 physical format. This has to happen after all fdt nodes @@ -75,15 +154,42 @@ void ft_board_setup_ex(void *blob, bd_t *bd); void ft_cpu_setup(void *blob, bd_t *bd); void ft_pci_setup(void *blob, bd_t *bd); -void set_working_fdt_addr(void *addr); -int fdt_shrink_to_minimum(void *blob); +/** + * Add system-specific data to the FDT before booting the OS. + * + * Use CONFIG_SYS_FDT_PAD to ensure there is sufficient space. + * This function is called if CONFIG_OF_SYSTEM_SETUP is defined + * + * @param blob FDT blob to update + * @param bd_t Pointer to board data + * @return 0 if ok, or -FDT_ERR_... on error + */ +int ft_system_setup(void *blob, bd_t *bd); + +void set_working_fdt_addr(ulong addr); + +/** + * shrink down the given blob to minimum size + some extrasize if required + * + * @param blob FDT blob to update + * @param extrasize additional bytes needed + * @return 0 if ok, or -FDT_ERR_... on error + */ +int fdt_shrink_to_minimum(void *blob, uint extrasize); int fdt_increase_size(void *fdt, int add_len); int fdt_fixup_nor_flash_size(void *blob); +#if defined(CONFIG_FDT_FIXUP_PARTITIONS) void fdt_fixup_mtdparts(void *fdt, void *node_info, int node_info_size); +#else +static inline void fdt_fixup_mtdparts(void *fdt, void *node_info, + int node_info_size) {} +#endif + void fdt_del_node_and_alias(void *blob, const char *alias); -u64 fdt_translate_address(void *blob, int node_offset, const __be32 *in_addr); +u64 fdt_translate_address(const void *blob, int node_offset, + const __be32 *in_addr); int fdt_node_offset_by_compat_reg(void *blob, const char *compat, phys_addr_t compat_off); int fdt_alloc_phandle(void *blob); @@ -142,8 +248,13 @@ static inline u64 of_read_number(const fdt32_t *cell, int size) return r; } -void of_bus_default_count_cells(void *blob, int parentoffset, +void of_bus_default_count_cells(const void *blob, int parentoffset, int *addrc, int *sizec); +int ft_verify_fdt(void *fdt); +int arch_fixup_memory_node(void *blob); + +int fdt_setup_simplefb_node(void *fdt, int node, u64 base_address, u32 width, + u32 height, u32 stride, const char *format); #endif /* ifdef CONFIG_OF_LIBFDT */