X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fi2c.h;h=1f35acf67595105b5888d2f516bd4647c97cdf07;hb=7bf038ec21968eb3081529f257b7cd30474e6d62;hp=8d6f867422c4bd6165d5954b5d92ad94e536fd79;hpb=f82642e33899766892499b163e60560fbbf87773;p=u-boot

diff --git a/include/i2c.h b/include/i2c.h
index 8d6f867422..1f35acf675 100644
--- a/include/i2c.h
+++ b/include/i2c.h
@@ -46,14 +46,16 @@
  */
 #define I2C_RXTX_LEN	128	/* maximum tx/rx buffer length */
 
-#if defined(CONFIG_I2C_MULTI_BUS)
-#define CONFIG_SYS_MAX_I2C_BUS		2
-#define I2C_GET_BUS()		i2c_get_bus_num()
-#define I2C_SET_BUS(a)		i2c_set_bus_num(a)
+#ifdef	CONFIG_I2C_MULTI_BUS
+#define	MAX_I2C_BUS			2
+#define	I2C_MULTI_BUS			1
 #else
-#define CONFIG_SYS_MAX_I2C_BUS		1
-#define I2C_GET_BUS()		0
-#define I2C_SET_BUS(a)
+#define	MAX_I2C_BUS			1
+#define	I2C_MULTI_BUS			0
+#endif
+
+#if !defined(CONFIG_SYS_MAX_I2C_BUS)
+#define CONFIG_SYS_MAX_I2C_BUS		MAX_I2C_BUS
 #endif
 
 /* define the I2C bus number for RTC and DTT if not already done */
@@ -72,17 +74,43 @@
 #  define I2C_SOFT_DECLARATIONS volatile ioport_t *iop = ioport_addr((immap_t *)CONFIG_SYS_IMMR, I2C_PORT);
 # elif defined(CONFIG_8xx)
 #  define I2C_SOFT_DECLARATIONS	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+
+# elif (defined(CONFIG_AT91RM9200) || \
+	defined(CONFIG_AT91SAM9260) ||  defined(CONFIG_AT91SAM9261) || \
+	defined(CONFIG_AT91SAM9263)) && !defined(CONFIG_AT91_LEGACY)
+#  define I2C_SOFT_DECLARATIONS	at91_pio_t *pio	= (at91_pio_t *) ATMEL_BASE_PIOA;
 # else
 #  define I2C_SOFT_DECLARATIONS
 # endif
 #endif
+
+#ifdef CONFIG_8xx
+/* Set default value for the I2C bus speed on 8xx. In the
+ * future, we'll define these in all 8xx board config files.
+ */
+#ifndef	CONFIG_SYS_I2C_SPEED
+#define	CONFIG_SYS_I2C_SPEED	50000
+#endif
+#endif
+
+/*
+ * Many boards/controllers/drivers don't support an I2C slave interface so
+ * provide a default slave address for them for use in common code.  A real
+ * value for CONFIG_SYS_I2C_SLAVE should be defined for any board which does
+ * support a slave interface.
+ */
+#ifndef	CONFIG_SYS_I2C_SLAVE
+#define	CONFIG_SYS_I2C_SLAVE	0xfe
+#endif
+
 /*
  * Initialization, must be called once on start up, may be called
  * repeatedly to change the speed and slave addresses.
  */
 void i2c_init(int speed, int slaveaddr);
-#ifdef CONFIG_SYS_I2C_INIT_BOARD
 void i2c_init_board(void);
+#ifdef CONFIG_SYS_I2C_BOARD_LATE_INIT
+void i2c_board_late_init(void);
 #endif
 
 #if defined(CONFIG_I2C_MUX)
@@ -100,8 +128,6 @@ typedef struct _mux_device {
 	struct _mux_device	*next;
 } I2C_MUX_DEVICE;
 
-int	i2c_mux_add_device(I2C_MUX_DEVICE *dev);
-
 I2C_MUX_DEVICE	*i2c_mux_search_device(int id);
 I2C_MUX_DEVICE *i2c_mux_ident_muxstring (uchar *buf);
 int i2x_mux_select_mux(int bus);
@@ -132,8 +158,38 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len);
 /*
  * Utility routines to read/write registers.
  */
-uchar i2c_reg_read (uchar chip, uchar reg);
-void  i2c_reg_write(uchar chip, uchar reg, uchar val);
+static inline u8 i2c_reg_read(u8 addr, u8 reg)
+{
+	u8 buf;
+
+#ifdef CONFIG_8xx
+	/* MPC8xx needs this.  Maybe one day we can get rid of it. */
+	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#endif
+
+#ifdef DEBUG
+	printf("%s: addr=0x%02x, reg=0x%02x\n", __func__, addr, reg);
+#endif
+
+	i2c_read(addr, reg, 1, &buf, 1);
+
+	return buf;
+}
+
+static inline void i2c_reg_write(u8 addr, u8 reg, u8 val)
+{
+#ifdef CONFIG_8xx
+	/* MPC8xx needs this.  Maybe one day we can get rid of it. */
+	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#endif
+
+#ifdef DEBUG
+	printf("%s: addr=0x%02x, reg=0x%02x, val=0x%02x\n",
+	       __func__, addr, reg, val);
+#endif
+
+	i2c_write(addr, reg, 1, &val, 1);
+}
 
 /*
  * Functions for setting the current I2C bus and its speed
@@ -180,4 +236,18 @@ int i2c_set_bus_speed(unsigned int);
 
 unsigned int i2c_get_bus_speed(void);
 
+/* NOTE: These two functions MUST be always_inline to avoid code growth! */
+static inline unsigned int I2C_GET_BUS(void) __attribute__((always_inline));
+static inline unsigned int I2C_GET_BUS(void)
+{
+	return I2C_MULTI_BUS ? i2c_get_bus_num() : 0;
+}
+
+static inline void I2C_SET_BUS(unsigned int bus) __attribute__((always_inline));
+static inline void I2C_SET_BUS(unsigned int bus)
+{
+	if (I2C_MULTI_BUS)
+		i2c_set_bus_num(bus);
+}
+
 #endif	/* _I2C_H_ */