X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fi2c.h;h=d500445aaf193b517f7df3ec457105d85ef9fa71;hb=fc300e2c5d9b6217400d89a58e35a69b362ad288;hp=4c0e263b9338f5e214591a061869c2a560e62911;hpb=7fc65bcf8a0a5463db86efbb273a40448c845efc;p=u-boot

diff --git a/include/i2c.h b/include/i2c.h
index 4c0e263b93..d500445aaf 100644
--- a/include/i2c.h
+++ b/include/i2c.h
@@ -190,6 +190,19 @@ int dm_i2c_reg_read(struct udevice *dev, uint offset);
  */
 int dm_i2c_reg_write(struct udevice *dev, uint offset, unsigned int val);
 
+/**
+ * dm_i2c_xfer() - Transfer messages over I2C
+ *
+ * This transfers a raw message. It is best to use dm_i2c_reg_read/write()
+ * instead.
+ *
+ * @dev:	Device to use for transfer
+ * @msg:	List of messages to transfer
+ * @nmsgs:	Number of messages to transfer
+ * @return 0 on success, -ve on error
+ */
+int dm_i2c_xfer(struct udevice *dev, struct i2c_msg *msg, int nmsgs);
+
 /**
  * dm_i2c_set_bus_speed() - set the speed of a bus
  *
@@ -431,6 +444,45 @@ struct dm_i2c_ops {
 
 #define i2c_get_ops(dev)	((struct dm_i2c_ops *)(dev)->driver->ops)
 
+/**
+ * struct i2c_mux_ops - operations for an I2C mux
+ *
+ * The current mux state is expected to be stored in the mux itself since
+ * it is the only thing that knows how to make things work. The mux can
+ * record the current state and then avoid switching unless it is necessary.
+ * So select() can be skipped if the mux is already in the correct state.
+ * Also deselect() can be made a nop if required.
+ */
+struct i2c_mux_ops {
+	/**
+	 * select() - select one of of I2C buses attached to a mux
+	 *
+	 * This will be called when there is no bus currently selected by the
+	 * mux. This method does not need to deselect the old bus since
+	 * deselect() will be already have been called if necessary.
+	 *
+	 * @mux:	Mux device
+	 * @bus:	I2C bus to select
+	 * @channel:	Channel number correponding to the bus to select
+	 * @return 0 if OK, -ve on error
+	 */
+	int (*select)(struct udevice *mux, struct udevice *bus, uint channel);
+
+	/**
+	 * deselect() - select one of of I2C buses attached to a mux
+	 *
+	 * This is used to deselect the currently selected I2C bus.
+	 *
+	 * @mux:	Mux device
+	 * @bus:	I2C bus to deselect
+	 * @channel:	Channel number correponding to the bus to deselect
+	 * @return 0 if OK, -ve on error
+	 */
+	int (*deselect)(struct udevice *mux, struct udevice *bus, uint channel);
+};
+
+#define i2c_mux_get_ops(dev)	((struct i2c_mux_ops *)(dev)->driver->ops)
+
 /**
  * i2c_get_chip() - get a device to use to access a chip on a bus
  *
@@ -447,7 +499,8 @@ int i2c_get_chip(struct udevice *bus, uint chip_addr, uint offset_len,
 		 struct udevice **devp);
 
 /**
- * i2c_get_chip() - get a device to use to access a chip on a bus number
+ * i2c_get_chip_for_busnum() - get a device to use to access a chip on
+ *			       a bus number
  *
  * This returns the device for the given chip address on a particular bus
  * number.
@@ -648,6 +701,9 @@ extern struct i2c_bus_hose	i2c_bus[];
  * Initialization, must be called once on start up, may be called
  * repeatedly to change the speed and slave addresses.
  */
+#ifdef CONFIG_SYS_I2C_EARLY_INIT
+void i2c_early_init_f(void);
+#endif
 void i2c_init(int speed, int slaveaddr);
 void i2c_init_board(void);
 #ifdef CONFIG_SYS_I2C_BOARD_LATE_INIT