X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fi2c.h;h=d500445aaf193b517f7df3ec457105d85ef9fa71;hb=fc300e2c5d9b6217400d89a58e35a69b362ad288;hp=d794057f4b9f77bfcef5b8fff5814ea7643538e8;hpb=ba3864f8037f58dd1f46cad3b76adc0a84bd33b3;p=u-boot diff --git a/include/i2c.h b/include/i2c.h index d794057f4b..d500445aaf 100644 --- a/include/i2c.h +++ b/include/i2c.h @@ -54,6 +54,7 @@ struct dm_i2c_chip { uint flags; #ifdef CONFIG_SANDBOX struct udevice *emul; + bool test_mode; #endif }; @@ -73,6 +74,49 @@ struct dm_i2c_bus { int speed_hz; }; +/* + * Not all of these flags are implemented in the U-Boot API + */ +enum dm_i2c_msg_flags { + I2C_M_TEN = 0x0010, /* ten-bit chip address */ + I2C_M_RD = 0x0001, /* read data, from slave to master */ + I2C_M_STOP = 0x8000, /* send stop after this message */ + I2C_M_NOSTART = 0x4000, /* no start before this message */ + I2C_M_REV_DIR_ADDR = 0x2000, /* invert polarity of R/W bit */ + I2C_M_IGNORE_NAK = 0x1000, /* continue after NAK */ + I2C_M_NO_RD_ACK = 0x0800, /* skip the Ack bit on reads */ + I2C_M_RECV_LEN = 0x0400, /* length is first received byte */ +}; + +/** + * struct i2c_msg - an I2C message + * + * @addr: Slave address + * @flags: Flags (see enum dm_i2c_msg_flags) + * @len: Length of buffer in bytes, may be 0 for a probe + * @buf: Buffer to send/receive, or NULL if no data + */ +struct i2c_msg { + uint addr; + uint flags; + uint len; + u8 *buf; +}; + +/** + * struct i2c_msg_list - a list of I2C messages + * + * This is called i2c_rdwr_ioctl_data in Linux but the name does not seem + * appropriate in U-Boot. + * + * @msg: Pointer to i2c_msg array + * @nmsgs: Number of elements in the array + */ +struct i2c_msg_list { + struct i2c_msg *msgs; + uint nmsgs; +}; + /** * dm_i2c_read() - read bytes from an I2C chip * @@ -128,6 +172,7 @@ int dm_i2c_probe(struct udevice *bus, uint chip_addr, uint chip_flags, * * This reads a single value from the given address in an I2C chip * + * @dev: Device to use for transfer * @addr: Address to read from * @return value read, or -ve on error */ @@ -138,12 +183,26 @@ int dm_i2c_reg_read(struct udevice *dev, uint offset); * * This writes a single value to the given address in an I2C chip * + * @dev: Device to use for transfer * @addr: Address to write to * @val: Value to write (normally a byte) * @return 0 on success, -ve on error */ int dm_i2c_reg_write(struct udevice *dev, uint offset, unsigned int val); +/** + * dm_i2c_xfer() - Transfer messages over I2C + * + * This transfers a raw message. It is best to use dm_i2c_reg_read/write() + * instead. + * + * @dev: Device to use for transfer + * @msg: List of messages to transfer + * @nmsgs: Number of messages to transfer + * @return 0 on success, -ve on error + */ +int dm_i2c_xfer(struct udevice *dev, struct i2c_msg *msg, int nmsgs); + /** * dm_i2c_set_bus_speed() - set the speed of a bus * @@ -192,8 +251,15 @@ int i2c_get_chip_flags(struct udevice *dev, uint *flagsp); * * @offset_len: New offset length value (typically 1 or 2) */ - int i2c_set_chip_offset_len(struct udevice *dev, uint offset_len); + +/** + * i2c_get_offset_len() - get the offset length for a chip + * + * @return: Current offset length value (typically 1 or 2) + */ +int i2c_get_chip_offset_len(struct udevice *dev); + /** * i2c_deblock() - recover a bus that is in an unknown state * @@ -276,50 +342,13 @@ void i2c_init(int speed, int slaveaddr); */ void board_i2c_init(const void *blob); -#endif - /* - * Not all of these flags are implemented in the U-Boot API - */ -enum dm_i2c_msg_flags { - I2C_M_TEN = 0x0010, /* ten-bit chip address */ - I2C_M_RD = 0x0001, /* read data, from slave to master */ - I2C_M_STOP = 0x8000, /* send stop after this message */ - I2C_M_NOSTART = 0x4000, /* no start before this message */ - I2C_M_REV_DIR_ADDR = 0x2000, /* invert polarity of R/W bit */ - I2C_M_IGNORE_NAK = 0x1000, /* continue after NAK */ - I2C_M_NO_RD_ACK = 0x0800, /* skip the Ack bit on reads */ - I2C_M_RECV_LEN = 0x0400, /* length is first received byte */ -}; - -/** - * struct i2c_msg - an I2C message - * - * @addr: Slave address - * @flags: Flags (see enum dm_i2c_msg_flags) - * @len: Length of buffer in bytes, may be 0 for a probe - * @buf: Buffer to send/receive, or NULL if no data + * Compatibility functions for driver model. */ -struct i2c_msg { - uint addr; - uint flags; - uint len; - u8 *buf; -}; +uint8_t i2c_reg_read(uint8_t addr, uint8_t reg); +void i2c_reg_write(uint8_t addr, uint8_t reg, uint8_t val); -/** - * struct i2c_msg_list - a list of I2C messages - * - * This is called i2c_rdwr_ioctl_data in Linux but the name does not seem - * appropriate in U-Boot. - * - * @msg: Pointer to i2c_msg array - * @nmsgs: Number of elements in the array - */ -struct i2c_msg_list { - struct i2c_msg *msgs; - uint nmsgs; -}; +#endif /** * struct dm_i2c_ops - driver operations for I2C uclass @@ -415,6 +444,45 @@ struct dm_i2c_ops { #define i2c_get_ops(dev) ((struct dm_i2c_ops *)(dev)->driver->ops) +/** + * struct i2c_mux_ops - operations for an I2C mux + * + * The current mux state is expected to be stored in the mux itself since + * it is the only thing that knows how to make things work. The mux can + * record the current state and then avoid switching unless it is necessary. + * So select() can be skipped if the mux is already in the correct state. + * Also deselect() can be made a nop if required. + */ +struct i2c_mux_ops { + /** + * select() - select one of of I2C buses attached to a mux + * + * This will be called when there is no bus currently selected by the + * mux. This method does not need to deselect the old bus since + * deselect() will be already have been called if necessary. + * + * @mux: Mux device + * @bus: I2C bus to select + * @channel: Channel number correponding to the bus to select + * @return 0 if OK, -ve on error + */ + int (*select)(struct udevice *mux, struct udevice *bus, uint channel); + + /** + * deselect() - select one of of I2C buses attached to a mux + * + * This is used to deselect the currently selected I2C bus. + * + * @mux: Mux device + * @bus: I2C bus to deselect + * @channel: Channel number correponding to the bus to deselect + * @return 0 if OK, -ve on error + */ + int (*deselect)(struct udevice *mux, struct udevice *bus, uint channel); +}; + +#define i2c_mux_get_ops(dev) ((struct i2c_mux_ops *)(dev)->driver->ops) + /** * i2c_get_chip() - get a device to use to access a chip on a bus * @@ -431,7 +499,8 @@ int i2c_get_chip(struct udevice *bus, uint chip_addr, uint offset_len, struct udevice **devp); /** - * i2c_get_chip() - get a device to use to access a chip on a bus number + * i2c_get_chip_for_busnum() - get a device to use to access a chip on + * a bus number * * This returns the device for the given chip address on a particular bus * number. @@ -459,6 +528,16 @@ int i2c_get_chip_for_busnum(int busnum, int chip_addr, uint offset_len, int i2c_chip_ofdata_to_platdata(const void *blob, int node, struct dm_i2c_chip *chip); +/** + * i2c_dump_msgs() - Dump a list of I2C messages + * + * This may be useful for debugging. + * + * @msg: Message list to dump + * @nmsgs: Number of messages + */ +void i2c_dump_msgs(struct i2c_msg *msg, int nmsgs); + #ifndef CONFIG_DM_I2C /* @@ -622,6 +701,9 @@ extern struct i2c_bus_hose i2c_bus[]; * Initialization, must be called once on start up, may be called * repeatedly to change the speed and slave addresses. */ +#ifdef CONFIG_SYS_I2C_EARLY_INIT +void i2c_early_init_f(void); +#endif void i2c_init(int speed, int slaveaddr); void i2c_init_board(void); #ifdef CONFIG_SYS_I2C_BOARD_LATE_INIT