X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fmmc.h;h=7f5f9bc8ca86eb92614c24f951991f05d9dd64e5;hb=14b256e5c084e1b693f4ad73c6a8beee7ffcb4af;hp=d5a896fbb134f59b2fa040b43ce538128d7b3094;hpb=8caf46d1890b625aafe9cc16114b3c65842dbb98;p=u-boot

diff --git a/include/mmc.h b/include/mmc.h
index d5a896fbb1..7f5f9bc8ca 100644
--- a/include/mmc.h
+++ b/include/mmc.h
@@ -38,6 +38,7 @@
 #define MMC_MODE_8BIT		(1 << 3)
 #define MMC_MODE_SPI		(1 << 4)
 #define MMC_MODE_HC		(1 << 5)
+#define MMC_MODE_DDR_52MHz	(1 << 6)
 
 #define SD_DATA_4BIT	0x00040000
 
@@ -51,6 +52,7 @@
 #define COMM_ERR		-18 /* Communications Error */
 #define TIMEOUT			-19
 #define IN_PROGRESS		-20 /* operation is in progress */
+#define SWITCH_ERR		-21 /* Card reports failure to switch mode */
 
 #define MMC_CMD_GO_IDLE_STATE		0
 #define MMC_CMD_SEND_OP_COND		1
@@ -67,6 +69,7 @@
 #define MMC_CMD_SET_BLOCKLEN		16
 #define MMC_CMD_READ_SINGLE_BLOCK	17
 #define MMC_CMD_READ_MULTIPLE_BLOCK	18
+#define MMC_CMD_SET_BLOCK_COUNT         23
 #define MMC_CMD_WRITE_SINGLE_BLOCK	24
 #define MMC_CMD_WRITE_MULTIPLE_BLOCK	25
 #define MMC_CMD_ERASE_GROUP_START	35
@@ -103,6 +106,7 @@
 #define SECURE_ERASE		0x80000000
 
 #define MMC_STATUS_MASK		(~0x0206BF7F)
+#define MMC_STATUS_SWITCH_ERROR	(1 << 7)
 #define MMC_STATUS_RDY_FOR_DATA (1 << 8)
 #define MMC_STATUS_CURR_STATE	(0xf << 9)
 #define MMC_STATUS_ERROR	(1 << 19)
@@ -169,10 +173,16 @@
 
 #define EXT_CSD_CARD_TYPE_26	(1 << 0)	/* Card can run at 26MHz */
 #define EXT_CSD_CARD_TYPE_52	(1 << 1)	/* Card can run at 52MHz */
+#define EXT_CSD_CARD_TYPE_DDR_1_8V	(1 << 2)
+#define EXT_CSD_CARD_TYPE_DDR_1_2V	(1 << 3)
+#define EXT_CSD_CARD_TYPE_DDR_52	(EXT_CSD_CARD_TYPE_DDR_1_8V \
+					| EXT_CSD_CARD_TYPE_DDR_1_2V)
 
 #define EXT_CSD_BUS_WIDTH_1	0	/* Card is in 1 bit mode */
 #define EXT_CSD_BUS_WIDTH_4	1	/* Card is in 4 bit mode */
 #define EXT_CSD_BUS_WIDTH_8	2	/* Card is in 8 bit mode */
+#define EXT_CSD_DDR_BUS_WIDTH_4	5	/* Card is in 4 bit DDR mode */
+#define EXT_CSD_DDR_BUS_WIDTH_8	6	/* Card is in 8 bit DDR mode */
 
 #define EXT_CSD_BOOT_ACK_ENABLE			(1 << 6)
 #define EXT_CSD_BOOT_PARTITION_ENABLE		(1 << 3)
@@ -219,6 +229,7 @@
  * boot partitions (2), general purpose partitions (4) in MMC v4.4.
  */
 #define MMC_NUM_BOOT_PARTITION	2
+#define MMC_PART_RPMB           3       /* RPMB partition number */
 
 struct mmc_cid {
 	unsigned long psn;
@@ -316,10 +327,11 @@ struct mmc *find_mmc_device(int dev_num);
 int mmc_set_dev(int dev_num);
 void print_mmc_devices(char separator);
 int get_mmc_num(void);
-int board_mmc_getcd(struct mmc *mmc);
 int mmc_switch_part(int dev_num, unsigned int part_num);
 int mmc_getcd(struct mmc *mmc);
+int board_mmc_getcd(struct mmc *mmc);
 int mmc_getwp(struct mmc *mmc);
+int board_mmc_getwp(struct mmc *mmc);
 int mmc_set_dsr(struct mmc *mmc, u16 val);
 /* Function to change the size of boot partition and rpmb partitions */
 int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize,
@@ -330,7 +342,13 @@ int mmc_set_part_conf(struct mmc *mmc, u8 ack, u8 part_num, u8 access);
 int mmc_set_boot_bus_width(struct mmc *mmc, u8 width, u8 reset, u8 mode);
 /* Function to modify the RST_n_FUNCTION field of EXT_CSD */
 int mmc_set_rst_n_function(struct mmc *mmc, u8 enable);
-
+/* Functions to read / write the RPMB partition */
+int mmc_rpmb_set_key(struct mmc *mmc, void *key);
+int mmc_rpmb_get_counter(struct mmc *mmc, unsigned long *counter);
+int mmc_rpmb_read(struct mmc *mmc, void *addr, unsigned short blk,
+		  unsigned short cnt, unsigned char *key);
+int mmc_rpmb_write(struct mmc *mmc, void *addr, unsigned short blk,
+		   unsigned short cnt, unsigned char *key);
 /**
  * Start device initialization and return immediately; it does not block on
  * polling OCR (operation condition register) status.  Then you should call
@@ -368,6 +386,7 @@ int mmc_legacy_init(int verbose);
 #endif
 
 int board_mmc_init(bd_t *bis);
+int cpu_mmc_init(bd_t *bis);
 
 /* Set block count limit because of 16 bit register limit on some hardware*/
 #ifndef CONFIG_SYS_MMC_MAX_BLK_COUNT