X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fmpc83xx.h;h=191488aa89938d2454438bdd36878b717435c9e3;hb=c2d9befa0b4695b89476fb5d259742c09afe243f;hp=7f30d683b9daabcba8fdcf1ba053f2525db2dabe;hpb=72c55878ecb1f0fdc8bc13516e5cb18fbae505e7;p=u-boot diff --git a/include/mpc83xx.h b/include/mpc83xx.h index 7f30d683b9..191488aa89 100644 --- a/include/mpc83xx.h +++ b/include/mpc83xx.h @@ -544,12 +544,14 @@ #define HRCWH_RL_EXT_LEGACY 0x00000000 #define HRCWH_RL_EXT_NAND 0x00040000 +#define HRCWH_TSEC1M_MASK 0x0000E000 #define HRCWH_TSEC1M_IN_MII 0x00000000 #define HRCWH_TSEC1M_IN_RMII 0x00002000 #define HRCWH_TSEC1M_IN_RGMII 0x00006000 #define HRCWH_TSEC1M_IN_RTBI 0x0000A000 #define HRCWH_TSEC1M_IN_SGMII 0x0000C000 +#define HRCWH_TSEC2M_MASK 0x00001C00 #define HRCWH_TSEC2M_IN_MII 0x00000000 #define HRCWH_TSEC2M_IN_RMII 0x00000400 #define HRCWH_TSEC2M_IN_RGMII 0x00000C00 @@ -749,9 +751,6 @@ #define SCCR_USBDRCM_2 0x00800000 #define SCCR_USBDRCM_3 0x00c00000 -#define SCCR_PCIEXP1CM 0x00300000 -#define SCCR_PCIEXP2CM 0x000c0000 - #define SCCR_SATA1CM 0x00003000 #define SCCR_SATA1CM_SHIFT 12 #define SCCR_SATACM 0x00003c00 @@ -798,6 +797,17 @@ #define SCCR_USBDRCM_2 0x00800000 #define SCCR_USBDRCM_3 0x00c00000 +/* All of the four SATA controllers must have the same clock ratio */ +#define SCCR_SATA1CM 0x000000c0 +#define SCCR_SATA1CM_SHIFT 6 +#define SCCR_SATACM 0x000000ff +#define SCCR_SATACM_SHIFT 0 +#define SCCR_SATACM_0 0x00000000 +#define SCCR_SATACM_1 0x00000055 +#define SCCR_SATACM_2 0x000000aa +#define SCCR_SATACM_3 0x000000ff +#endif + #define SCCR_PCIEXP1CM 0x00300000 #define SCCR_PCIEXP1CM_SHIFT 20 #define SCCR_PCIEXP1CM_0 0x00000000 @@ -812,17 +822,6 @@ #define SCCR_PCIEXP2CM_2 0x00080000 #define SCCR_PCIEXP2CM_3 0x000c0000 -/* All of the four SATA controllers must have the same clock ratio */ -#define SCCR_SATA1CM 0x000000c0 -#define SCCR_SATA1CM_SHIFT 6 -#define SCCR_SATACM 0x000000ff -#define SCCR_SATACM_SHIFT 0 -#define SCCR_SATACM_0 0x00000000 -#define SCCR_SATACM_1 0x00000055 -#define SCCR_SATACM_2 0x000000aa -#define SCCR_SATACM_3 0x000000ff -#endif - /* CSn_BDNS - Chip Select memory Bounds Register */ #define CSBNDS_SA 0x00FF0000 @@ -885,7 +884,9 @@ #define TIMING_CFG1_WRTORD_SHIFT 0 #define TIMING_CFG1_CASLAT_20 0x00030000 /* CAS latency = 2.0 */ #define TIMING_CFG1_CASLAT_25 0x00040000 /* CAS latency = 2.5 */ -#define TIMING_CFG1_CASLAT_30 0x00050000 /* CAS latency = 2.5 */ +#define TIMING_CFG1_CASLAT_30 0x00050000 /* CAS latency = 3.0 */ +#define TIMING_CFG1_CASLAT_35 0x00060000 /* CAS latency = 3.5 */ +#define TIMING_CFG1_CASLAT_40 0x00070000 /* CAS latency = 4.0 */ /* TIMING_CFG_2 - DDR SDRAM Timing Configuration 2 */ @@ -1145,91 +1146,6 @@ */ #define PMCCR1_POWER_OFF 0x00000020 -/* FMR - Flash Mode Register - */ -#define FMR_CWTO 0x0000F000 -#define FMR_CWTO_SHIFT 12 -#define FMR_BOOT 0x00000800 -#define FMR_ECCM 0x00000100 -#define FMR_AL 0x00000030 -#define FMR_AL_SHIFT 4 -#define FMR_OP 0x00000003 -#define FMR_OP_SHIFT 0 - -/* FIR - Flash Instruction Register - */ -#define FIR_OP0 0xF0000000 -#define FIR_OP0_SHIFT 28 -#define FIR_OP1 0x0F000000 -#define FIR_OP1_SHIFT 24 -#define FIR_OP2 0x00F00000 -#define FIR_OP2_SHIFT 20 -#define FIR_OP3 0x000F0000 -#define FIR_OP3_SHIFT 16 -#define FIR_OP4 0x0000F000 -#define FIR_OP4_SHIFT 12 -#define FIR_OP5 0x00000F00 -#define FIR_OP5_SHIFT 8 -#define FIR_OP6 0x000000F0 -#define FIR_OP6_SHIFT 4 -#define FIR_OP7 0x0000000F -#define FIR_OP7_SHIFT 0 -#define FIR_OP_NOP 0x0 /* No operation and end of sequence */ -#define FIR_OP_CA 0x1 /* Issue current column address */ -#define FIR_OP_PA 0x2 /* Issue current block+page address */ -#define FIR_OP_UA 0x3 /* Issue user defined address */ -#define FIR_OP_CM0 0x4 /* Issue command from FCR[CMD0] */ -#define FIR_OP_CM1 0x5 /* Issue command from FCR[CMD1] */ -#define FIR_OP_CM2 0x6 /* Issue command from FCR[CMD2] */ -#define FIR_OP_CM3 0x7 /* Issue command from FCR[CMD3] */ -#define FIR_OP_WB 0x8 /* Write FBCR bytes from FCM buffer */ -#define FIR_OP_WS 0x9 /* Write 1 or 2 bytes from MDR[AS] */ -#define FIR_OP_RB 0xA /* Read FBCR bytes to FCM buffer */ -#define FIR_OP_RS 0xB /* Read 1 or 2 bytes to MDR[AS] */ -#define FIR_OP_CW0 0xC /* Wait then issue FCR[CMD0] */ -#define FIR_OP_CW1 0xD /* Wait then issue FCR[CMD1] */ -#define FIR_OP_RBW 0xE /* Wait then read FBCR bytes */ -#define FIR_OP_RSW 0xF /* Wait then read 1 or 2 bytes */ - -/* FCR - Flash Command Register - */ -#define FCR_CMD0 0xFF000000 -#define FCR_CMD0_SHIFT 24 -#define FCR_CMD1 0x00FF0000 -#define FCR_CMD1_SHIFT 16 -#define FCR_CMD2 0x0000FF00 -#define FCR_CMD2_SHIFT 8 -#define FCR_CMD3 0x000000FF -#define FCR_CMD3_SHIFT 0 - -/* FBAR - Flash Block Address Register - */ -#define FBAR_BLK 0x00FFFFFF - -/* FPAR - Flash Page Address Register - */ -#define FPAR_SP_PI 0x00007C00 -#define FPAR_SP_PI_SHIFT 10 -#define FPAR_SP_MS 0x00000200 -#define FPAR_SP_CI 0x000001FF -#define FPAR_SP_CI_SHIFT 0 -#define FPAR_LP_PI 0x0003F000 -#define FPAR_LP_PI_SHIFT 12 -#define FPAR_LP_MS 0x00000800 -#define FPAR_LP_CI 0x000007FF -#define FPAR_LP_CI_SHIFT 0 - -/* LTESR - Transfer Error Status Register - */ -#define LTESR_BM 0x80000000 -#define LTESR_FCT 0x40000000 -#define LTESR_PAR 0x20000000 -#define LTESR_WP 0x04000000 -#define LTESR_ATMW 0x00800000 -#define LTESR_ATMR 0x00400000 -#define LTESR_CS 0x00080000 -#define LTESR_CC 0x00000001 - /* DDRCDR - DDR Control Driver Register */ #define DDRCDR_DHC_EN 0x80000000 @@ -1251,9 +1167,52 @@ #define DDRCDR_M_ODR 0x00000002 #define DDRCDR_Q_DRN 0x00000001 +/* PCIE Bridge Register +*/ +#define PEX_CSB_CTRL_OBPIOE 0x00000001 +#define PEX_CSB_CTRL_IBPIOE 0x00000002 +#define PEX_CSB_CTRL_WDMAE 0x00000004 +#define PEX_CSB_CTRL_RDMAE 0x00000008 + +#define PEX_CSB_OBCTRL_PIOE 0x00000001 +#define PEX_CSB_OBCTRL_MEMWE 0x00000002 +#define PEX_CSB_OBCTRL_IOWE 0x00000004 +#define PEX_CSB_OBCTRL_CFGWE 0x00000008 + +#define PEX_CSB_IBCTRL_PIOE 0x00000001 + +#define PEX_OWAR_EN 0x00000001 +#define PEX_OWAR_TYPE_CFG 0x00000000 +#define PEX_OWAR_TYPE_IO 0x00000002 +#define PEX_OWAR_TYPE_MEM 0x00000004 +#define PEX_OWAR_RLXO 0x00000008 +#define PEX_OWAR_NANP 0x00000010 +#define PEX_OWAR_SIZE 0xFFFFF000 + +#define PEX_IWAR_EN 0x00000001 +#define PEX_IWAR_TYPE_INT 0x00000000 +#define PEX_IWAR_TYPE_PF 0x00000004 +#define PEX_IWAR_TYPE_NO_PF 0x00000006 +#define PEX_IWAR_NSOV 0x00000008 +#define PEX_IWAR_NSNP 0x00000010 +#define PEX_IWAR_SIZE 0xFFFFF000 +#define PEX_IWAR_SIZE_1M 0x000FF000 +#define PEX_IWAR_SIZE_2M 0x001FF000 +#define PEX_IWAR_SIZE_4M 0x003FF000 +#define PEX_IWAR_SIZE_8M 0x007FF000 +#define PEX_IWAR_SIZE_16M 0x00FFF000 +#define PEX_IWAR_SIZE_32M 0x01FFF000 +#define PEX_IWAR_SIZE_64M 0x03FFF000 +#define PEX_IWAR_SIZE_128M 0x07FFF000 +#define PEX_IWAR_SIZE_256M 0x0FFFF000 + +#define PEX_GCLK_RATIO 0x440 + #ifndef __ASSEMBLY__ struct pci_region; void mpc83xx_pci_init(int num_buses, struct pci_region **reg, int warmboot); +void mpc83xx_pcislave_unlock(int bus); +void mpc83xx_pcie_init(int num_buses, struct pci_region **reg, int warmboot); #endif #endif /* __MPC83XX_H__ */