X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fnetdev.h;h=4724717d99a58d94e411a39cbfbdb677717d3dc0;hb=d5f6a15a397839b2e0f1f78e7a4a4ffe9c2ccb26;hp=96c7b9b5f2f0481929a597dbd9a45a0314f06d83;hpb=bd6ce9d171b45465daa23bede5214100dd8b5eba;p=u-boot

diff --git a/include/netdev.h b/include/netdev.h
index 96c7b9b5f2..4724717d99 100644
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -42,11 +42,13 @@ int cpu_eth_init(bd_t *bis);
 
 /* Driver initialization prototypes */
 int altera_tse_initialize(u8 dev_num, int mac_base,
-			  int sgdma_rx_base, int sgdma_tx_base);
+			  int sgdma_rx_base, int sgdma_tx_base,
+			  u32 sgdma_desc_base, u32 sgdma_desc_size);
 int at91emac_register(bd_t *bis, unsigned long iobase);
 int au1x00_enet_initialize(bd_t*);
 int ax88180_initialize(bd_t *bis);
 int bfin_EMAC_initialize(bd_t *bis);
+int calxedaxgmac_initialize(u32 id, ulong base_addr);
 int cs8900_initialize(u8 dev_num, int base_addr);
 int davinci_emac_initialize(void);
 int dc21x4x_initialize(bd_t *bis);
@@ -61,8 +63,8 @@ int ep93xx_eth_initialize(u8 dev_num, int base_addr);
 int eth_3com_initialize (bd_t * bis);
 int ethoc_initialize(u8 dev_num, int base_addr);
 int fec_initialize (bd_t *bis);
-int fecmxc_initialize (bd_t *bis);
 int fecmxc_initialize(bd_t *bis);
+int fecmxc_initialize_multi(bd_t *bis, int dev_id, int phy_id, uint32_t addr);
 int ftgmac100_initialize(bd_t *bits);
 int ftmac100_initialize(bd_t *bits);
 int greth_initialize(bd_t *bis);
@@ -79,6 +81,7 @@ int mpc8220_fec_initialize(bd_t *bis);
 int mpc82xx_scc_enet_initialize(bd_t *bis);
 int mvgbe_initialize(bd_t *bis);
 int natsemi_initialize(bd_t *bis);
+int ne2k_register(void);
 int npe_initialize(bd_t *bis);
 int ns8382x_initialize(bd_t *bis);
 int pcnet_initialize(bd_t *bis);
@@ -94,7 +97,23 @@ int smc911x_initialize(u8 dev_num, int base_addr);
 int tsi108_eth_initialize(bd_t *bis);
 int uec_standard_init(bd_t *bis);
 int uli526x_initialize(bd_t *bis);
-int xilinx_emaclite_initialize (bd_t *bis, int base_addr);
+int armada100_fec_register(unsigned long base_addr);
+int xilinx_axiemac_initialize(bd_t *bis, unsigned long base_addr,
+							unsigned long dma_addr);
+int xilinx_emaclite_initialize(bd_t *bis, unsigned long base_addr,
+							int txpp, int rxpp);
+int xilinx_ll_temac_eth_init(bd_t *bis, unsigned long base_addr, int flags,
+						unsigned long ctrl_addr);
+
+/*
+ * As long as the Xilinx xps_ll_temac ethernet driver has not its own interface
+ * exported by a public hader file, we need a global definition at this point.
+ */
+#if defined(CONFIG_XILINX_LL_TEMAC)
+#define XILINX_LL_TEMAC_M_FIFO		0	/* use FIFO Ctrl */
+#define XILINX_LL_TEMAC_M_SDMA_PLB	(1 << 0)/* use SDMA Ctrl via PLB */
+#define XILINX_LL_TEMAC_M_SDMA_DCR	(1 << 1)/* use SDMA Ctrl via DCR */
+#endif
 
 /* Boards with PCI network controllers can call this from their board_eth_init()
  * function to initialize whatever's on board.
@@ -185,4 +204,9 @@ struct mv88e61xx_config {
 int mv88e61xx_switch_initialize(struct mv88e61xx_config *swconfig);
 #endif /* CONFIG_MV88E61XX_SWITCH */
 
+/*
+ * Allow FEC to fine-tune MII configuration on boards which require this.
+ */
+int fecmxc_register_mii_postcall(struct eth_device *dev, int (*cb)(int));
+
 #endif /* _NETDEV_H_ */