X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fpower%2Fpfuze100_pmic.h;h=41cb710d78f47e61e6ed25e9f4aa5d94c53d1c7e;hb=74c8cb02a4a7d20961a58ff8763ee32045becccb;hp=11184893bfb99966e9e6fd089344911175b47ca9;hpb=1fc4e6f486cc1e9d2dcf0ba86e6021c3d83dce51;p=u-boot

diff --git a/include/power/pfuze100_pmic.h b/include/power/pfuze100_pmic.h
index 11184893bf..41cb710d78 100644
--- a/include/power/pfuze100_pmic.h
+++ b/include/power/pfuze100_pmic.h
@@ -8,6 +8,11 @@
 #ifndef __PFUZE100_PMIC_H_
 #define __PFUZE100_PMIC_H_
 
+/* Device ID */
+enum {PFUZE100 = 0x10, PFUZE200 = 0x11, PFUZE3000 = 0x30};
+
+#define PFUZE100_REGULATOR_DRIVER	"pfuze100_regulator"
+
 /* PFUZE100 registers */
 enum {
 	PFUZE100_DEVICEID	= 0x00,
@@ -16,14 +21,34 @@ enum {
 
 	PFUZE100_SW1ABVOL	= 0x20,
 	PFUZE100_SW1ABSTBY	= 0x21,
-	PUZE_100_SW1ABCONF	= 0x24,
+	PFUZE100_SW1ABOFF	= 0x22,
+	PFUZE100_SW1ABMODE	= 0x23,
+	PFUZE100_SW1ABCONF	= 0x24,
 	PFUZE100_SW1CVOL	= 0x2e,
 	PFUZE100_SW1CSTBY	= 0x2f,
+	PFUZE100_SW1COFF	= 0x30,
+	PFUZE100_SW1CMODE	= 0x31,
 	PFUZE100_SW1CCONF	= 0x32,
 	PFUZE100_SW2VOL		= 0x35,
+	PFUZE100_SW2STBY	= 0x36,
+	PFUZE100_SW2OFF		= 0x37,
+	PFUZE100_SW2MODE	= 0x38,
+	PFUZE100_SW2CONF	= 0x39,
 	PFUZE100_SW3AVOL	= 0x3c,
+	PFUZE100_SW3ASTBY	= 0x3D,
+	PFUZE100_SW3AOFF	= 0x3E,
+	PFUZE100_SW3AMODE	= 0x3F,
+	PFUZE100_SW3ACONF	= 0x40,
 	PFUZE100_SW3BVOL	= 0x43,
+	PFUZE100_SW3BSTBY	= 0x44,
+	PFUZE100_SW3BOFF	= 0x45,
+	PFUZE100_SW3BMODE	= 0x46,
+	PFUZE100_SW3BCONF	= 0x47,
 	PFUZE100_SW4VOL		= 0x4a,
+	PFUZE100_SW4STBY	= 0x4b,
+	PFUZE100_SW4OFF		= 0x4c,
+	PFUZE100_SW4MODE	= 0x4d,
+	PFUZE100_SW4CONF	= 0x4e,
 	PFUZE100_SWBSTCON1	= 0x66,
 	PFUZE100_VREFDDRCON	= 0x6a,
 	PFUZE100_VSNVSVOL	= 0x6b,
@@ -34,13 +59,22 @@ enum {
 	PFUZE100_VGEN5VOL	= 0x70,
 	PFUZE100_VGEN6VOL	= 0x71,
 
-	PMIC_NUM_OF_REGS	= 0x7f,
+	PFUZE100_NUM_OF_REGS	= 0x7f,
 };
 
+/* Registor offset based on VOLT register */
+#define PFUZE100_VOL_OFFSET	0
+#define PFUZE100_STBY_OFFSET	1
+#define PFUZE100_OFF_OFFSET	2
+#define PFUZE100_MODE_OFFSET	3
+#define PFUZE100_CONF_OFFSET	4
+
 /*
  * Buck Regulators
  */
 
+#define PFUZE100_SW1ABC_SETP(x)	((x - 3000) / 250)
+
 /* SW1A/B/C Output Voltage Configuration */
 #define SW1x_0_300V 0
 #define SW1x_0_325V 1
@@ -111,6 +145,9 @@ enum {
 #define SW1x_STBY_MASK    0x3f
 #define SW1x_OFF_MASK     0x3f
 
+#define SW_MODE_MASK	0xf
+#define SW_MODE_SHIFT	0
+
 #define SW1xCONF_DVSSPEED_MASK 0xc0
 #define SW1xCONF_DVSSPEED_2US  0x00
 #define SW1xCONF_DVSSPEED_4US  0x40
@@ -158,8 +195,13 @@ enum {
 #define LDOB_3_30V	15
 
 #define LDO_VOL_MASK	0xf
-#define LDO_EN		4
+#define LDO_EN		(1 << 4)
+#define LDO_MODE_SHIFT	4
+#define LDO_MODE_MASK	(1 << 4)
+#define LDO_MODE_OFF	0
+#define LDO_MODE_ON	1
 
+#define VREFDDRCON_EN	(1 << 4)
 /*
  * Boost Regulator
  */
@@ -171,11 +213,47 @@ enum {
 #define SWBST_5_15V	3
 
 #define SWBST_VOL_MASK	0x3
-#define SWBST_MODE_MASK	0x6
-#define SWBST_MODE_OFF	(2 << 0)
-#define SWBST_MODE_PFM	(2 << 1)
-#define SWBST_MODE_AUTO	(2 << 2)
-#define SWBST_MODE_APS	(2 << 3)
+#define SWBST_MODE_MASK	0xC
+#define SWBST_MODE_SHIFT 0x2
+#define SWBST_MODE_OFF	0
+#define SWBST_MODE_PFM	1
+#define SWBST_MODE_AUTO	2
+#define SWBST_MODE_APS	3
+
+/*
+ * Regulator Mode Control
+ *
+ * OFF: The regulator is switched off and the output voltage is discharged.
+ * PFM: In this mode, the regulator is always in PFM mode, which is useful
+ *      at light loads for optimized efficiency.
+ * PWM: In this mode, the regulator is always in PWM mode operation
+ *	regardless of load conditions.
+ * APS: In this mode, the regulator moves automatically between pulse
+ *	skipping mode and PWM mode depending on load conditions.
+ *
+ * SWxMODE[3:0]
+ * Normal Mode  |  Standby Mode	|      value
+ *   OFF		OFF		0x0
+ *   PWM		OFF		0x1
+ *   PFM		OFF		0x3
+ *   APS		OFF		0x4
+ *   PWM		PWM		0x5
+ *   PWM		APS		0x6
+ *   APS		APS		0x8
+ *   APS		PFM		0xc
+ *   PWM		PFM		0xd
+ */
+#define OFF_OFF		0x0
+#define PWM_OFF		0x1
+#define PFM_OFF		0x3
+#define APS_OFF		0x4
+#define PWM_PWM		0x5
+#define PWM_APS		0x6
+#define APS_APS		0x8
+#define APS_PFM		0xc
+#define PWM_PFM		0xd
+
+#define SWITCH_SIZE	0x7
 
 int power_pfuze100_init(unsigned char bus);
 #endif