X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fppc405.h;h=508c77b14e54f2f1db0e146f140a81fddded1422;hb=4713010adf5beda87410d637ebfc58db0db9a9db;hp=a17dd359505fb5d400126cfbcef1f4b1d1b6cd01;hpb=8bf7437c0127f417b566c93ffa59df7292a0e11f;p=u-boot diff --git a/include/ppc405.h b/include/ppc405.h index a17dd35950..508c77b14e 100644 --- a/include/ppc405.h +++ b/include/ppc405.h @@ -1,4 +1,6 @@ /*----------------------------------------------------------------------------+ +| This source code is dual-licensed. You may use it under the terms of the +| GNU General Public License version 2, or under the license below. | | This source code has been made available to you by IBM on an AS-IS | basis. Anyone receiving this source is licensed under IBM @@ -27,9 +29,9 @@ #define PPC_128MB_SACR_VALUE(addr) PPC_REG_VAL(PPC_128MB_SACR_BIT(addr),1) #ifndef CONFIG_IOP480 -#define CONFIG_SYS_DCACHE_SIZE (16 << 10) /* For AMCC 405 CPUs */ +#define CONFIG_SYS_DCACHE_SIZE (16 << 10) /* For AMCC 405 CPUs */ #else -#define CONFIG_SYS_DCACHE_SIZE (2 << 10) /* For PLX IOP480 (403) */ +#define CONFIG_SYS_DCACHE_SIZE (2 << 10) /* For PLX IOP480(403)*/ #endif /****************************************************************************** @@ -40,54 +42,39 @@ * DMA ******************************************************************************/ #define DMA_DCR_BASE 0x100 -#define dmacr0 (DMA_DCR_BASE+0x00) /* DMA channel control register 0 */ -#define dmact0 (DMA_DCR_BASE+0x01) /* DMA count register 0 */ -#define dmada0 (DMA_DCR_BASE+0x02) /* DMA destination address register 0 */ -#define dmasa0 (DMA_DCR_BASE+0x03) /* DMA source address register 0 */ -#define dmasb0 (DMA_DCR_BASE+0x04) /* DMA scatter/gather descriptor addr 0 */ -#define dmacr1 (DMA_DCR_BASE+0x08) /* DMA channel control register 1 */ -#define dmact1 (DMA_DCR_BASE+0x09) /* DMA count register 1 */ -#define dmada1 (DMA_DCR_BASE+0x0a) /* DMA destination address register 1 */ -#define dmasa1 (DMA_DCR_BASE+0x0b) /* DMA source address register 1 */ -#define dmasb1 (DMA_DCR_BASE+0x0c) /* DMA scatter/gather descriptor addr 1 */ -#define dmacr2 (DMA_DCR_BASE+0x10) /* DMA channel control register 2 */ -#define dmact2 (DMA_DCR_BASE+0x11) /* DMA count register 2 */ -#define dmada2 (DMA_DCR_BASE+0x12) /* DMA destination address register 2 */ -#define dmasa2 (DMA_DCR_BASE+0x13) /* DMA source address register 2 */ -#define dmasb2 (DMA_DCR_BASE+0x14) /* DMA scatter/gather descriptor addr 2 */ -#define dmacr3 (DMA_DCR_BASE+0x18) /* DMA channel control register 3 */ -#define dmact3 (DMA_DCR_BASE+0x19) /* DMA count register 3 */ -#define dmada3 (DMA_DCR_BASE+0x1a) /* DMA destination address register 3 */ -#define dmasa3 (DMA_DCR_BASE+0x1b) /* DMA source address register 3 */ -#define dmasb3 (DMA_DCR_BASE+0x1c) /* DMA scatter/gather descriptor addr 3 */ -#define dmasr (DMA_DCR_BASE+0x20) /* DMA status register */ -#define dmasgc (DMA_DCR_BASE+0x23) /* DMA scatter/gather command register */ -#define dmaadr (DMA_DCR_BASE+0x24) /* DMA address decode register */ +#define DMACR0 (DMA_DCR_BASE+0x00) /* DMA channel control register 0 */ +#define DMACT0 (DMA_DCR_BASE+0x01) /* DMA count register 0 */ +#define DMADA0 (DMA_DCR_BASE+0x02) /* DMA destination address register 0 */ +#define DMASA0 (DMA_DCR_BASE+0x03) /* DMA source address register 0 */ +#define DMASB0 (DMA_DCR_BASE+0x04) /* DMA scatter/gather descriptor addr 0 */ +#define DMACR1 (DMA_DCR_BASE+0x08) /* DMA channel control register 1 */ +#define DMACT1 (DMA_DCR_BASE+0x09) /* DMA count register 1 */ +#define DMADA1 (DMA_DCR_BASE+0x0a) /* DMA destination address register 1 */ +#define DMASA1 (DMA_DCR_BASE+0x0b) /* DMA source address register 1 */ +#define DMASB1 (DMA_DCR_BASE+0x0c) /* DMA scatter/gather descriptor addr 1 */ +#define DMACR2 (DMA_DCR_BASE+0x10) /* DMA channel control register 2 */ +#define DMACT2 (DMA_DCR_BASE+0x11) /* DMA count register 2 */ +#define DMADA2 (DMA_DCR_BASE+0x12) /* DMA destination address register 2 */ +#define DMASA2 (DMA_DCR_BASE+0x13) /* DMA source address register 2 */ +#define DMASB2 (DMA_DCR_BASE+0x14) /* DMA scatter/gather descriptor addr 2 */ +#define DMACR3 (DMA_DCR_BASE+0x18) /* DMA channel control register 3 */ +#define DMACT3 (DMA_DCR_BASE+0x19) /* DMA count register 3 */ +#define DMADA3 (DMA_DCR_BASE+0x1a) /* DMA destination address register 3 */ +#define DMASA3 (DMA_DCR_BASE+0x1b) /* DMA source address register 3 */ +#define DMASB3 (DMA_DCR_BASE+0x1c) /* DMA scatter/gather descriptor addr 3 */ +#define DMASR (DMA_DCR_BASE+0x20) /* DMA status register */ +#define DMASGC (DMA_DCR_BASE+0x23) /* DMA scatter/gather command register */ +#define DMAADR (DMA_DCR_BASE+0x24) /* DMA address decode register */ #ifndef CONFIG_405EP /****************************************************************************** * Decompression Controller ******************************************************************************/ #define DECOMP_DCR_BASE 0x14 -#define kiar (DECOMP_DCR_BASE+0x0) /* Decompression controller addr reg */ -#define kidr (DECOMP_DCR_BASE+0x1) /* Decompression controller data reg */ - /* values for kiar register - indirect addressing of these regs */ - #define kitor0 0x00 /* index table origin register 0 */ - #define kitor1 0x01 /* index table origin register 1 */ - #define kitor2 0x02 /* index table origin register 2 */ - #define kitor3 0x03 /* index table origin register 3 */ - #define kaddr0 0x04 /* address decode definition regsiter 0 */ - #define kaddr1 0x05 /* address decode definition regsiter 1 */ - #define kconf 0x40 /* decompression core config register */ - #define kid 0x41 /* decompression core ID register */ - #define kver 0x42 /* decompression core version # reg */ - #define kpear 0x50 /* bus error addr reg (PLB addr) */ - #define kbear 0x51 /* bus error addr reg (DCP to EBIU addr)*/ - #define kesr0 0x52 /* bus error status reg 0 (R/clear) */ - #define kesr0s 0x53 /* bus error status reg 0 (set) */ - /* There are 0x400 of the following registers, from krom0 to krom3ff*/ - /* Only the first one is given here. */ - #define krom0 0x400 /* SRAM/ROM read/write */ +#define KIAR (DECOMP_DCR_BASE+0x0) /* Decompression controller addr reg */ +#define KIDR (DECOMP_DCR_BASE+0x1) /* Decompression controller data reg */ +/* values for kiar register - indirect addressing of these regs */ +#define KCONF 0x40 /* decompression core config register */ #endif /****************************************************************************** @@ -98,62 +85,61 @@ #else #define POWERMAN_DCR_BASE 0xb8 #endif -#define cpmsr (POWERMAN_DCR_BASE+0x0) /* Power management status */ -#define cpmer (POWERMAN_DCR_BASE+0x1) /* Power management enable */ -#define cpmfr (POWERMAN_DCR_BASE+0x2) /* Power management force */ +#define CPMSR (POWERMAN_DCR_BASE+0x0) /* Power management status */ +#define CPMER (POWERMAN_DCR_BASE+0x1) /* Power management enable */ +#define CPMFR (POWERMAN_DCR_BASE+0x2) /* Power management force */ /****************************************************************************** * Extrnal Bus Controller ******************************************************************************/ - /* values for ebccfga register - indirect addressing of these regs */ - #define pb0cr 0x00 /* periph bank 0 config reg */ - #define pb1cr 0x01 /* periph bank 1 config reg */ - #define pb2cr 0x02 /* periph bank 2 config reg */ - #define pb3cr 0x03 /* periph bank 3 config reg */ - #define pb4cr 0x04 /* periph bank 4 config reg */ + /* values for EBC0_CFGADDR register - indirect addressing of these regs */ + #define PB0CR 0x00 /* periph bank 0 config reg */ + #define PB1CR 0x01 /* periph bank 1 config reg */ + #define PB2CR 0x02 /* periph bank 2 config reg */ + #define PB3CR 0x03 /* periph bank 3 config reg */ + #define PB4CR 0x04 /* periph bank 4 config reg */ #ifndef CONFIG_405EP - #define pb5cr 0x05 /* periph bank 5 config reg */ - #define pb6cr 0x06 /* periph bank 6 config reg */ - #define pb7cr 0x07 /* periph bank 7 config reg */ + #define PB5CR 0x05 /* periph bank 5 config reg */ + #define PB6CR 0x06 /* periph bank 6 config reg */ + #define PB7CR 0x07 /* periph bank 7 config reg */ #endif - #define pb0ap 0x10 /* periph bank 0 access parameters */ - #define pb1ap 0x11 /* periph bank 1 access parameters */ - #define pb2ap 0x12 /* periph bank 2 access parameters */ - #define pb3ap 0x13 /* periph bank 3 access parameters */ - #define pb4ap 0x14 /* periph bank 4 access parameters */ + #define PB0AP 0x10 /* periph bank 0 access parameters */ + #define PB1AP 0x11 /* periph bank 1 access parameters */ + #define PB2AP 0x12 /* periph bank 2 access parameters */ + #define PB3AP 0x13 /* periph bank 3 access parameters */ + #define PB4AP 0x14 /* periph bank 4 access parameters */ #ifndef CONFIG_405EP - #define pb5ap 0x15 /* periph bank 5 access parameters */ - #define pb6ap 0x16 /* periph bank 6 access parameters */ - #define pb7ap 0x17 /* periph bank 7 access parameters */ + #define PB5AP 0x15 /* periph bank 5 access parameters */ + #define PB6AP 0x16 /* periph bank 6 access parameters */ + #define PB7AP 0x17 /* periph bank 7 access parameters */ #endif - #define pbear 0x20 /* periph bus error addr reg */ - #define pbesr0 0x21 /* periph bus error status reg 0 */ - #define pbesr1 0x22 /* periph bus error status reg 1 */ - #define epcr 0x23 /* external periph control reg */ -#define EBC0_CFG 0x23 /* external bus configuration reg */ + #define PBEAR 0x20 /* periph bus error addr reg */ + #define PBESR0 0x21 /* periph bus error status reg 0 */ + #define PBESR1 0x22 /* periph bus error status reg 1 */ +#define EBC0_CFG 0x23 /* external bus configuration reg */ #ifdef CONFIG_405EP /****************************************************************************** * Control ******************************************************************************/ #define CNTRL_DCR_BASE 0x0f0 -#define cpc0_pllmr0 (CNTRL_DCR_BASE+0x0) /* PLL mode register 0 */ -#define cpc0_boot (CNTRL_DCR_BASE+0x1) /* Clock status register */ -#define cpc0_epctl (CNTRL_DCR_BASE+0x3) /* EMAC to PHY control register */ -#define cpc0_pllmr1 (CNTRL_DCR_BASE+0x4) /* PLL mode register 1 */ -#define cpc0_ucr (CNTRL_DCR_BASE+0x5) /* UART control register */ -#define cpc0_pci (CNTRL_DCR_BASE+0x9) /* PCI control register */ - -#define CPC0_PLLMR0 (CNTRL_DCR_BASE+0x0) /* PLL mode 0 register */ -#define CPC0_BOOT (CNTRL_DCR_BASE+0x1) /* Chip Clock Status register */ -#define CPC0_CR1 (CNTRL_DCR_BASE+0x2) /* Chip Control 1 register */ -#define CPC0_EPRCSR (CNTRL_DCR_BASE+0x3) /* EMAC PHY Rcv Clk Src register*/ -#define CPC0_PLLMR1 (CNTRL_DCR_BASE+0x4) /* PLL mode 1 register */ -#define CPC0_UCR (CNTRL_DCR_BASE+0x5) /* UART Control register */ -#define CPC0_SRR (CNTRL_DCR_BASE+0x6) /* Soft Reset register */ -#define CPC0_JTAGID (CNTRL_DCR_BASE+0x7) /* JTAG ID register */ -#define CPC0_SPARE (CNTRL_DCR_BASE+0x8) /* Spare DCR */ -#define CPC0_PCI (CNTRL_DCR_BASE+0x9) /* PCI Control register */ +#define CPC0_PLLMR0 (CNTRL_DCR_BASE+0x0) /* PLL mode register 0 */ +#define CPC0_BOOT (CNTRL_DCR_BASE+0x1) /* Clock status register */ +#define CPC0_EPCTL (CNTRL_DCR_BASE+0x3) /* EMAC to PHY control register */ +#define CPC0_PLLMR1 (CNTRL_DCR_BASE+0x4) /* PLL mode register 1 */ +#define CPC0_UCR (CNTRL_DCR_BASE+0x5) /* UART control register */ +#define CPC0_PCI (CNTRL_DCR_BASE+0x9) /* PCI control register */ + +#define CPC0_PLLMR0 (CNTRL_DCR_BASE+0x0) /* PLL mode 0 register */ +#define CPC0_BOOT (CNTRL_DCR_BASE+0x1) /* Chip Clock Status register */ +#define CPC0_CR1 (CNTRL_DCR_BASE+0x2) /* Chip Control 1 register */ +#define CPC0_EPRCSR (CNTRL_DCR_BASE+0x3) /* EMAC PHY Rcv Clk Src register */ +#define CPC0_PLLMR1 (CNTRL_DCR_BASE+0x4) /* PLL mode 1 register */ +#define CPC0_UCR (CNTRL_DCR_BASE+0x5) /* UART Control register */ +#define CPC0_SRR (CNTRL_DCR_BASE+0x6) /* Soft Reset register */ +#define CPC0_JTAGID (CNTRL_DCR_BASE+0x7) /* JTAG ID register */ +#define CPC0_SPARE (CNTRL_DCR_BASE+0x8) /* Spare DCR */ +#define CPC0_PCI (CNTRL_DCR_BASE+0x9) /* PCI Control register */ /* Bit definitions */ #define PLLMR0_CPU_DIV_MASK 0x00300000 /* CPU clock divider */ @@ -174,13 +160,13 @@ #define PLLMR0_OPB_PLB_DIV_3 0x00002000 #define PLLMR0_OPB_PLB_DIV_4 0x00003000 -#define PLLMR0_EXB_TO_PLB_MASK 0x00000300 /* External Bus:PLB Divisor */ +#define PLLMR0_EXB_TO_PLB_MASK 0x00000300 /* External Bus:PLB Divisor */ #define PLLMR0_EXB_PLB_DIV_2 0x00000000 #define PLLMR0_EXB_PLB_DIV_3 0x00000100 #define PLLMR0_EXB_PLB_DIV_4 0x00000200 #define PLLMR0_EXB_PLB_DIV_5 0x00000300 -#define PLLMR0_MAL_TO_PLB_MASK 0x00000030 /* MAL:PLB Divisor */ +#define PLLMR0_MAL_TO_PLB_MASK 0x00000030 /* MAL:PLB Divisor */ #define PLLMR0_MAL_PLB_DIV_1 0x00000000 #define PLLMR0_MAL_PLB_DIV_2 0x00000010 #define PLLMR0_MAL_PLB_DIV_3 0x00000020 @@ -194,7 +180,7 @@ #define PLLMR1_SSCS_MASK 0x80000000 /* Select system clock source */ #define PLLMR1_PLLR_MASK 0x40000000 /* PLL reset */ -#define PLLMR1_FBMUL_MASK 0x00F00000 /* PLL feedback multiplier value */ +#define PLLMR1_FBMUL_MASK 0x00F00000 /* PLL feedback multiplier value */ #define PLLMR1_FBMUL_DIV_16 0x00000000 #define PLLMR1_FBMUL_DIV_1 0x00100000 #define PLLMR1_FBMUL_DIV_2 0x00200000 @@ -212,7 +198,7 @@ #define PLLMR1_FBMUL_DIV_14 0x00E00000 #define PLLMR1_FBMUL_DIV_15 0x00F00000 -#define PLLMR1_FWDVA_MASK 0x00070000 /* PLL forward divider A value */ +#define PLLMR1_FWDVA_MASK 0x00070000 /* PLL forward divider A value */ #define PLLMR1_FWDVA_DIV_8 0x00000000 #define PLLMR1_FWDVA_DIV_7 0x00010000 #define PLLMR1_FWDVA_DIV_6 0x00020000 @@ -221,132 +207,132 @@ #define PLLMR1_FWDVA_DIV_3 0x00050000 #define PLLMR1_FWDVA_DIV_2 0x00060000 #define PLLMR1_FWDVA_DIV_1 0x00070000 -#define PLLMR1_FWDVB_MASK 0x00007000 /* PLL forward divider B value */ -#define PLLMR1_TUNING_MASK 0x000003FF /* PLL tune bits */ +#define PLLMR1_FWDVB_MASK 0x00007000 /* PLL forward divider B value */ +#define PLLMR1_TUNING_MASK 0x000003FF /* PLL tune bits */ /* Defines for CPC0_EPRCSR register */ -#define CPC0_EPRCSR_E0NFE 0x80000000 -#define CPC0_EPRCSR_E1NFE 0x40000000 -#define CPC0_EPRCSR_E1RPP 0x00000080 -#define CPC0_EPRCSR_E0RPP 0x00000040 -#define CPC0_EPRCSR_E1ERP 0x00000020 -#define CPC0_EPRCSR_E0ERP 0x00000010 -#define CPC0_EPRCSR_E1PCI 0x00000002 -#define CPC0_EPRCSR_E0PCI 0x00000001 +#define CPC0_EPRCSR_E0NFE 0x80000000 +#define CPC0_EPRCSR_E1NFE 0x40000000 +#define CPC0_EPRCSR_E1RPP 0x00000080 +#define CPC0_EPRCSR_E0RPP 0x00000040 +#define CPC0_EPRCSR_E1ERP 0x00000020 +#define CPC0_EPRCSR_E0ERP 0x00000010 +#define CPC0_EPRCSR_E1PCI 0x00000002 +#define CPC0_EPRCSR_E0PCI 0x00000001 /* Defines for CPC0_PCI Register */ -#define CPC0_PCI_SPE 0x00000010 /* PCIINT/WE select */ -#define CPC0_PCI_HOST_CFG_EN 0x00000008 /* PCI host config Enable */ -#define CPC0_PCI_ARBIT_EN 0x00000001 /* PCI Internal Arb Enabled*/ +#define CPC0_PCI_SPE 0x00000010 /* PCIINT/WE select */ +#define CPC0_PCI_HOST_CFG_EN 0x00000008 /* PCI host config Enable */ +#define CPC0_PCI_ARBIT_EN 0x00000001 /* PCI Internal Arb Enabled */ /* Defines for CPC0_BOOR Register */ -#define CPC0_BOOT_SEP 0x00000002 /* serial EEPROM present */ +#define CPC0_BOOT_SEP 0x00000002 /* serial EEPROM present */ /* Defines for CPC0_PLLMR1 Register fields */ -#define PLL_ACTIVE 0x80000000 -#define CPC0_PLLMR1_SSCS 0x80000000 -#define PLL_RESET 0x40000000 -#define CPC0_PLLMR1_PLLR 0x40000000 - /* Feedback multiplier */ -#define PLL_FBKDIV 0x00F00000 -#define CPC0_PLLMR1_FBDV 0x00F00000 -#define PLL_FBKDIV_16 0x00000000 -#define PLL_FBKDIV_1 0x00100000 -#define PLL_FBKDIV_2 0x00200000 -#define PLL_FBKDIV_3 0x00300000 -#define PLL_FBKDIV_4 0x00400000 -#define PLL_FBKDIV_5 0x00500000 -#define PLL_FBKDIV_6 0x00600000 -#define PLL_FBKDIV_7 0x00700000 -#define PLL_FBKDIV_8 0x00800000 -#define PLL_FBKDIV_9 0x00900000 -#define PLL_FBKDIV_10 0x00A00000 -#define PLL_FBKDIV_11 0x00B00000 -#define PLL_FBKDIV_12 0x00C00000 -#define PLL_FBKDIV_13 0x00D00000 -#define PLL_FBKDIV_14 0x00E00000 -#define PLL_FBKDIV_15 0x00F00000 - /* Forward A divisor */ -#define PLL_FWDDIVA 0x00070000 -#define CPC0_PLLMR1_FWDVA 0x00070000 -#define PLL_FWDDIVA_8 0x00000000 -#define PLL_FWDDIVA_7 0x00010000 -#define PLL_FWDDIVA_6 0x00020000 -#define PLL_FWDDIVA_5 0x00030000 -#define PLL_FWDDIVA_4 0x00040000 -#define PLL_FWDDIVA_3 0x00050000 -#define PLL_FWDDIVA_2 0x00060000 -#define PLL_FWDDIVA_1 0x00070000 - /* Forward B divisor */ -#define PLL_FWDDIVB 0x00007000 -#define CPC0_PLLMR1_FWDVB 0x00007000 -#define PLL_FWDDIVB_8 0x00000000 -#define PLL_FWDDIVB_7 0x00001000 -#define PLL_FWDDIVB_6 0x00002000 -#define PLL_FWDDIVB_5 0x00003000 -#define PLL_FWDDIVB_4 0x00004000 -#define PLL_FWDDIVB_3 0x00005000 -#define PLL_FWDDIVB_2 0x00006000 -#define PLL_FWDDIVB_1 0x00007000 - /* PLL tune bits */ +#define PLL_ACTIVE 0x80000000 +#define CPC0_PLLMR1_SSCS 0x80000000 +#define PLL_RESET 0x40000000 +#define CPC0_PLLMR1_PLLR 0x40000000 + /* Feedback multiplier */ +#define PLL_FBKDIV 0x00F00000 +#define CPC0_PLLMR1_FBDV 0x00F00000 +#define PLL_FBKDIV_16 0x00000000 +#define PLL_FBKDIV_1 0x00100000 +#define PLL_FBKDIV_2 0x00200000 +#define PLL_FBKDIV_3 0x00300000 +#define PLL_FBKDIV_4 0x00400000 +#define PLL_FBKDIV_5 0x00500000 +#define PLL_FBKDIV_6 0x00600000 +#define PLL_FBKDIV_7 0x00700000 +#define PLL_FBKDIV_8 0x00800000 +#define PLL_FBKDIV_9 0x00900000 +#define PLL_FBKDIV_10 0x00A00000 +#define PLL_FBKDIV_11 0x00B00000 +#define PLL_FBKDIV_12 0x00C00000 +#define PLL_FBKDIV_13 0x00D00000 +#define PLL_FBKDIV_14 0x00E00000 +#define PLL_FBKDIV_15 0x00F00000 + /* Forward A divisor */ +#define PLL_FWDDIVA 0x00070000 +#define CPC0_PLLMR1_FWDVA 0x00070000 +#define PLL_FWDDIVA_8 0x00000000 +#define PLL_FWDDIVA_7 0x00010000 +#define PLL_FWDDIVA_6 0x00020000 +#define PLL_FWDDIVA_5 0x00030000 +#define PLL_FWDDIVA_4 0x00040000 +#define PLL_FWDDIVA_3 0x00050000 +#define PLL_FWDDIVA_2 0x00060000 +#define PLL_FWDDIVA_1 0x00070000 + /* Forward B divisor */ +#define PLL_FWDDIVB 0x00007000 +#define CPC0_PLLMR1_FWDVB 0x00007000 +#define PLL_FWDDIVB_8 0x00000000 +#define PLL_FWDDIVB_7 0x00001000 +#define PLL_FWDDIVB_6 0x00002000 +#define PLL_FWDDIVB_5 0x00003000 +#define PLL_FWDDIVB_4 0x00004000 +#define PLL_FWDDIVB_3 0x00005000 +#define PLL_FWDDIVB_2 0x00006000 +#define PLL_FWDDIVB_1 0x00007000 + /* PLL tune bits */ #define PLL_TUNE_MASK 0x000003FF -#define PLL_TUNE_2_M_3 0x00000133 /* 2 <= M <= 3 */ -#define PLL_TUNE_4_M_6 0x00000134 /* 3 < M <= 6 */ -#define PLL_TUNE_7_M_10 0x00000138 /* 6 < M <= 10 */ -#define PLL_TUNE_11_M_14 0x0000013C /* 10 < M <= 14 */ -#define PLL_TUNE_15_M_40 0x0000023E /* 14 < M <= 40 */ -#define PLL_TUNE_VCO_LOW 0x00000000 /* 500MHz <= VCO <= 800MHz */ -#define PLL_TUNE_VCO_HI 0x00000080 /* 800MHz < VCO <= 1000MHz */ +#define PLL_TUNE_2_M_3 0x00000133 /* 2 <= M <= 3 */ +#define PLL_TUNE_4_M_6 0x00000134 /* 3 < M <= 6 */ +#define PLL_TUNE_7_M_10 0x00000138 /* 6 < M <= 10 */ +#define PLL_TUNE_11_M_14 0x0000013C /* 10 < M <= 14 */ +#define PLL_TUNE_15_M_40 0x0000023E /* 14 < M <= 40 */ +#define PLL_TUNE_VCO_LOW 0x00000000 /* 500MHz <= VCO <= 800MHz */ +#define PLL_TUNE_VCO_HI 0x00000080 /* 800MHz < VCO <= 1000MHz */ /* Defines for CPC0_PLLMR0 Register fields */ - /* CPU divisor */ -#define PLL_CPUDIV 0x00300000 -#define CPC0_PLLMR0_CCDV 0x00300000 -#define PLL_CPUDIV_1 0x00000000 -#define PLL_CPUDIV_2 0x00100000 -#define PLL_CPUDIV_3 0x00200000 -#define PLL_CPUDIV_4 0x00300000 - /* PLB divisor */ -#define PLL_PLBDIV 0x00030000 -#define CPC0_PLLMR0_CBDV 0x00030000 -#define PLL_PLBDIV_1 0x00000000 -#define PLL_PLBDIV_2 0x00010000 -#define PLL_PLBDIV_3 0x00020000 -#define PLL_PLBDIV_4 0x00030000 - /* OPB divisor */ -#define PLL_OPBDIV 0x00003000 -#define CPC0_PLLMR0_OPDV 0x00003000 -#define PLL_OPBDIV_1 0x00000000 -#define PLL_OPBDIV_2 0x00001000 -#define PLL_OPBDIV_3 0x00002000 -#define PLL_OPBDIV_4 0x00003000 - /* EBC divisor */ -#define PLL_EXTBUSDIV 0x00000300 -#define CPC0_PLLMR0_EPDV 0x00000300 -#define PLL_EXTBUSDIV_2 0x00000000 -#define PLL_EXTBUSDIV_3 0x00000100 -#define PLL_EXTBUSDIV_4 0x00000200 -#define PLL_EXTBUSDIV_5 0x00000300 - /* MAL divisor */ -#define PLL_MALDIV 0x00000030 -#define CPC0_PLLMR0_MPDV 0x00000030 -#define PLL_MALDIV_1 0x00000000 -#define PLL_MALDIV_2 0x00000010 -#define PLL_MALDIV_3 0x00000020 -#define PLL_MALDIV_4 0x00000030 - /* PCI divisor */ -#define PLL_PCIDIV 0x00000003 -#define CPC0_PLLMR0_PPFD 0x00000003 -#define PLL_PCIDIV_1 0x00000000 -#define PLL_PCIDIV_2 0x00000001 -#define PLL_PCIDIV_3 0x00000002 -#define PLL_PCIDIV_4 0x00000003 + /* CPU divisor */ +#define PLL_CPUDIV 0x00300000 +#define CPC0_PLLMR0_CCDV 0x00300000 +#define PLL_CPUDIV_1 0x00000000 +#define PLL_CPUDIV_2 0x00100000 +#define PLL_CPUDIV_3 0x00200000 +#define PLL_CPUDIV_4 0x00300000 + /* PLB divisor */ +#define PLL_PLBDIV 0x00030000 +#define CPC0_PLLMR0_CBDV 0x00030000 +#define PLL_PLBDIV_1 0x00000000 +#define PLL_PLBDIV_2 0x00010000 +#define PLL_PLBDIV_3 0x00020000 +#define PLL_PLBDIV_4 0x00030000 + /* OPB divisor */ +#define PLL_OPBDIV 0x00003000 +#define CPC0_PLLMR0_OPDV 0x00003000 +#define PLL_OPBDIV_1 0x00000000 +#define PLL_OPBDIV_2 0x00001000 +#define PLL_OPBDIV_3 0x00002000 +#define PLL_OPBDIV_4 0x00003000 + /* EBC divisor */ +#define PLL_EXTBUSDIV 0x00000300 +#define CPC0_PLLMR0_EPDV 0x00000300 +#define PLL_EXTBUSDIV_2 0x00000000 +#define PLL_EXTBUSDIV_3 0x00000100 +#define PLL_EXTBUSDIV_4 0x00000200 +#define PLL_EXTBUSDIV_5 0x00000300 + /* MAL divisor */ +#define PLL_MALDIV 0x00000030 +#define CPC0_PLLMR0_MPDV 0x00000030 +#define PLL_MALDIV_1 0x00000000 +#define PLL_MALDIV_2 0x00000010 +#define PLL_MALDIV_3 0x00000020 +#define PLL_MALDIV_4 0x00000030 + /* PCI divisor */ +#define PLL_PCIDIV 0x00000003 +#define CPC0_PLLMR0_PPFD 0x00000003 +#define PLL_PCIDIV_1 0x00000000 +#define PLL_PCIDIV_2 0x00000001 +#define PLL_PCIDIV_3 0x00000002 +#define PLL_PCIDIV_4 0x00000003 /* - *------------------------------------------------------------------------------- + *------------------------------------------------------------------------------ * PLL settings for 266MHz CPU, 133MHz PLB/SDRAM, 66MHz EBC, 33MHz PCI, * assuming a 33.3MHz input clock to the 405EP. - *------------------------------------------------------------------------------- + *------------------------------------------------------------------------------ */ #define PLLMR0_266_133_66 (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \ PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \ @@ -399,10 +385,10 @@ #define VCO_MIN 500 #define VCO_MAX 1000 #elif defined(CONFIG_405EZ) -#define sdrnand0 0x4000 -#define sdrultra0 0x4040 -#define sdrultra1 0x4050 -#define sdricintstat 0x4510 +#define SDR0_NAND0 0x4000 +#define SDR0_ULTRA0 0x4040 +#define SDR0_ULTRA1 0x4050 +#define SDR0_ICINTSTAT 0x4510 #define SDR_NAND0_NDEN 0x80000000 #define SDR_NAND0_NDBTEN 0x40000000 @@ -427,71 +413,62 @@ #define SDR_ICTX0_STAT 0x40000000 #define SDR_ICTX1_STAT 0x20000000 -#define SDR_PINSTP 0x40 +#define SDR0_PINSTP 0x40 /****************************************************************************** * Control ******************************************************************************/ /* CPR Registers */ -#define cprclkupd 0x020 /* CPR_CLKUPD */ -#define cprpllc 0x040 /* CPR_PLLC */ -#define cprplld 0x060 /* CPR_PLLD */ -#define cprprimad 0x080 /* CPR_PRIMAD */ -#define cprperd0 0x0e0 /* CPR_PERD0 */ -#define cprperd1 0x0e1 /* CPR_PERD1 */ -#define cprperc0 0x180 /* CPR_PERC0 */ -#define cprmisc0 0x181 /* CPR_MISC0 */ -#define cprmisc1 0x182 /* CPR_MISC1 */ - -#define CPR_CLKUPD_ENPLLCH_EN 0x40000000 /* Enable CPR PLL Changes */ -#define CPR_CLKUPD_ENDVCH_EN 0x20000000 /* Enable CPR Sys. Div. Changes */ -#define CPR_PERD0_SPIDV_MASK 0x000F0000 /* SPI Clock Divider */ - -#define PLLC_SRC_MASK 0x20000000 /* PLL feedback source */ - -#define PLLD_FBDV_MASK 0x1F000000 /* PLL feedback divider value */ -#define PLLD_FWDVA_MASK 0x000F0000 /* PLL forward divider A value */ -#define PLLD_FWDVB_MASK 0x00000700 /* PLL forward divider B value */ - -#define PRIMAD_CPUDV_MASK 0x0F000000 /* CPU Clock Divisor Mask */ -#define PRIMAD_PLBDV_MASK 0x000F0000 /* PLB Clock Divisor Mask */ -#define PRIMAD_OPBDV_MASK 0x00000F00 /* OPB Clock Divisor Mask */ -#define PRIMAD_EBCDV_MASK 0x0000000F /* EBC Clock Divisor Mask */ - -#define PERD0_PWMDV_MASK 0xFF000000 /* PWM Divider Mask */ -#define PERD0_SPIDV_MASK 0x000F0000 /* SPI Divider Mask */ -#define PERD0_U0DV_MASK 0x0000FF00 /* UART 0 Divider Mask */ -#define PERD0_U1DV_MASK 0x000000FF /* UART 1 Divider Mask */ +#define CPR0_CLKUP 0x020 /* CPR_CLKUPD */ +#define CPR0_PLLC 0x040 /* CPR_PLLC */ +#define CPR0_PLLD 0x060 /* CPR_PLLD */ +#define CPC0_PRIMAD 0x080 /* CPR_PRIMAD */ +#define CPC0_PERD0 0x0e0 /* CPR_PERD0 */ +#define CPC0_PERD1 0x0e1 /* CPR_PERD1 */ +#define CPC0_PERC0 0x180 /* CPR_PERC0 */ + +#define CPR_CLKUPD_ENPLLCH_EN 0x40000000 /* Enable CPR PLL Changes */ +#define CPR_CLKUPD_ENDVCH_EN 0x20000000 /* Enable CPR Sys. Div. Changes */ +#define CPR_PERD0_SPIDV_MASK 0x000F0000 /* SPI Clock Divider */ + +#define PLLC_SRC_MASK 0x20000000 /* PLL feedback source */ + +#define PLLD_FBDV_MASK 0x1F000000 /* PLL feedback divider value */ +#define PLLD_FWDVA_MASK 0x000F0000 /* PLL forward divider A value */ +#define PLLD_FWDVB_MASK 0x00000700 /* PLL forward divider B value */ + +#define PRIMAD_CPUDV_MASK 0x0F000000 /* CPU Clock Divisor Mask */ +#define PRIMAD_PLBDV_MASK 0x000F0000 /* PLB Clock Divisor Mask */ +#define PRIMAD_OPBDV_MASK 0x00000F00 /* OPB Clock Divisor Mask */ +#define PRIMAD_EBCDV_MASK 0x0000000F /* EBC Clock Divisor Mask */ + +#define PERD0_PWMDV_MASK 0xFF000000 /* PWM Divider Mask */ +#define PERD0_SPIDV_MASK 0x000F0000 /* SPI Divider Mask */ +#define PERD0_U0DV_MASK 0x0000FF00 /* UART 0 Divider Mask */ +#define PERD0_U1DV_MASK 0x000000FF /* UART 1 Divider Mask */ #else /* #ifdef CONFIG_405EP */ /****************************************************************************** * Control ******************************************************************************/ #define CNTRL_DCR_BASE 0x0b0 -#define pllmd (CNTRL_DCR_BASE+0x0) /* PLL mode register */ -#define cntrl0 (CNTRL_DCR_BASE+0x1) /* Control 0 register */ -#define cntrl1 (CNTRL_DCR_BASE+0x2) /* Control 1 register */ -#define reset (CNTRL_DCR_BASE+0x3) /* reset register */ -#define strap (CNTRL_DCR_BASE+0x4) /* strap register */ - -#define CPC0_CR0 (CNTRL_DCR_BASE+0x1) /* chip control register 0 */ -#define CPC0_CR1 (CNTRL_DCR_BASE+0x2) /* chip control register 1 */ -#define CPC0_PSR (CNTRL_DCR_BASE+0x4) /* chip pin strapping register */ +#define CPC0_PLLMR (CNTRL_DCR_BASE + 0x0) /* PLL mode register */ +#define CPC0_CR0 (CNTRL_DCR_BASE + 0x1) /* chip control register 0 */ +#define CPC0_CR1 (CNTRL_DCR_BASE + 0x2) /* chip control register 1 */ +#define CPC0_PSR (CNTRL_DCR_BASE + 0x4) /* chip pin strapping reg */ /* CPC0_ECR/CPC0_EIRR: PPC405GPr only */ -#define CPC0_EIRR (CNTRL_DCR_BASE+0x6) /* external interrupt routing register */ -#define CPC0_ECR (0xaa) /* edge conditioner register */ - -#define ecr (0xaa) /* edge conditioner register (405gpr) */ +#define CPC0_EIRR (CNTRL_DCR_BASE + 0x6) /* ext interrupt routing reg */ +#define CPC0_ECR 0xaa /* edge conditioner register */ /* Bit definitions */ -#define PLLMR_FWD_DIV_MASK 0xE0000000 /* Forward Divisor */ +#define PLLMR_FWD_DIV_MASK 0xE0000000 /* Forward Divisor */ #define PLLMR_FWD_DIV_BYPASS 0xE0000000 #define PLLMR_FWD_DIV_3 0xA0000000 #define PLLMR_FWD_DIV_4 0x80000000 #define PLLMR_FWD_DIV_6 0x40000000 -#define PLLMR_FB_DIV_MASK 0x1E000000 /* Feedback Divisor */ +#define PLLMR_FB_DIV_MASK 0x1E000000 /* Feedback Divisor */ #define PLLMR_FB_DIV_1 0x02000000 #define PLLMR_FB_DIV_2 0x04000000 #define PLLMR_FB_DIV_3 0x06000000 @@ -499,32 +476,32 @@ #define PLLMR_TUNING_MASK 0x01F80000 -#define PLLMR_CPU_TO_PLB_MASK 0x00060000 /* CPU:PLB Frequency Divisor */ +#define PLLMR_CPU_TO_PLB_MASK 0x00060000 /* CPU:PLB Frequency Divisor */ #define PLLMR_CPU_PLB_DIV_1 0x00000000 #define PLLMR_CPU_PLB_DIV_2 0x00020000 #define PLLMR_CPU_PLB_DIV_3 0x00040000 #define PLLMR_CPU_PLB_DIV_4 0x00060000 -#define PLLMR_OPB_TO_PLB_MASK 0x00018000 /* OPB:PLB Frequency Divisor */ +#define PLLMR_OPB_TO_PLB_MASK 0x00018000 /* OPB:PLB Frequency Divisor */ #define PLLMR_OPB_PLB_DIV_1 0x00000000 #define PLLMR_OPB_PLB_DIV_2 0x00008000 #define PLLMR_OPB_PLB_DIV_3 0x00010000 #define PLLMR_OPB_PLB_DIV_4 0x00018000 -#define PLLMR_PCI_TO_PLB_MASK 0x00006000 /* PCI:PLB Frequency Divisor */ +#define PLLMR_PCI_TO_PLB_MASK 0x00006000 /* PCI:PLB Frequency Divisor */ #define PLLMR_PCI_PLB_DIV_1 0x00000000 #define PLLMR_PCI_PLB_DIV_2 0x00002000 #define PLLMR_PCI_PLB_DIV_3 0x00004000 #define PLLMR_PCI_PLB_DIV_4 0x00006000 -#define PLLMR_EXB_TO_PLB_MASK 0x00001800 /* External Bus:PLB Divisor */ +#define PLLMR_EXB_TO_PLB_MASK 0x00001800 /* External Bus:PLB Divisor */ #define PLLMR_EXB_PLB_DIV_2 0x00000000 #define PLLMR_EXB_PLB_DIV_3 0x00000800 #define PLLMR_EXB_PLB_DIV_4 0x00001000 #define PLLMR_EXB_PLB_DIV_5 0x00001800 /* definitions for PPC405GPr (new mode strapping) */ -#define PLLMR_FWDB_DIV_MASK 0x00000007 /* Forward Divisor B */ +#define PLLMR_FWDB_DIV_MASK 0x00000007 /* Forward Divisor B */ #define PSR_PLL_FWD_MASK 0xC0000000 #define PSR_PLL_FDBACK_MASK 0x30000000 @@ -536,15 +513,15 @@ #define PSR_ROM_WIDTH_MASK 0x00018000 #define PSR_ROM_LOC 0x00004000 #define PSR_PCI_ASYNC_EN 0x00001000 -#define PSR_PERCLK_SYNC_MODE_EN 0x00000800 /* PPC405GPr only */ +#define PSR_PERCLK_SYNC_MODE_EN 0x00000800 /* PPC405GPr only */ #define PSR_PCI_ARBIT_EN 0x00000400 -#define PSR_NEW_MODE_EN 0x00000020 /* PPC405GPr only */ +#define PSR_NEW_MODE_EN 0x00000020 /* PPC405GPr only */ #ifndef CONFIG_IOP480 /* * PLL Voltage Controlled Oscillator (VCO) definitions * Maximum and minimum values (in MHz) for correct PLL operation. - */ +*/ #define VCO_MIN 400 #define VCO_MAX 800 #endif /* #ifndef CONFIG_IOP480 */ @@ -555,140 +532,38 @@ ******************************************************************************/ #if defined(CONFIG_405EZ) #define MAL_DCR_BASE 0x380 -#define malmcr (MAL_DCR_BASE+0x00) /* MAL Config reg */ -#define malesr (MAL_DCR_BASE+0x01) /* Err Status reg (Read/Clear)*/ -#define malier (MAL_DCR_BASE+0x02) /* Interrupt enable reg */ -#define maldbr (MAL_DCR_BASE+0x03) /* Mal Debug reg (Read only) */ -#define maltxcasr (MAL_DCR_BASE+0x04) /* TX Channel active reg (set)*/ -#define maltxcarr (MAL_DCR_BASE+0x05) /* TX Channel active reg (Reset) */ -#define maltxeobisr (MAL_DCR_BASE+0x06) /* TX End of buffer int status reg */ -#define maltxdeir (MAL_DCR_BASE+0x07) /* TX Descr. Error Int reg */ -/* 0x08-0x0F Reserved */ -#define malrxcasr (MAL_DCR_BASE+0x10) /* RX Channel active reg (set)*/ -#define malrxcarr (MAL_DCR_BASE+0x11) /* RX Channel active reg (Reset) */ -#define malrxeobisr (MAL_DCR_BASE+0x12) /* RX End of buffer int status reg */ -#define malrxdeir (MAL_DCR_BASE+0x13) /* RX Descr. Error Int reg */ -/* 0x14-0x1F Reserved */ -#define maltxctp0r (MAL_DCR_BASE+0x20) /* TX 0 Channel table ptr reg */ -#define maltxctp1r (MAL_DCR_BASE+0x21) /* TX 1 Channel table ptr reg */ -#define maltxctp2r (MAL_DCR_BASE+0x22) /* TX 2 Channel table ptr reg */ -#define maltxctp3r (MAL_DCR_BASE+0x23) /* TX 3 Channel table ptr reg */ -#define maltxctp4r (MAL_DCR_BASE+0x24) /* TX 4 Channel table ptr reg */ -#define maltxctp5r (MAL_DCR_BASE+0x25) /* TX 5 Channel table ptr reg */ -#define maltxctp6r (MAL_DCR_BASE+0x26) /* TX 6 Channel table ptr reg */ -#define maltxctp7r (MAL_DCR_BASE+0x27) /* TX 7 Channel table ptr reg */ -#define maltxctp8r (MAL_DCR_BASE+0x28) /* TX 8 Channel table ptr reg */ -#define maltxctp9r (MAL_DCR_BASE+0x29) /* TX 9 Channel table ptr reg */ -#define maltxctp10r (MAL_DCR_BASE+0x2A) /* TX 10 Channel table ptr reg */ -#define maltxctp11r (MAL_DCR_BASE+0x2B) /* TX 11 Channel table ptr reg */ -#define maltxctp12r (MAL_DCR_BASE+0x2C) /* TX 12 Channel table ptr reg */ -#define maltxctp13r (MAL_DCR_BASE+0x2D) /* TX 13 Channel table ptr reg */ -#define maltxctp14r (MAL_DCR_BASE+0x2E) /* TX 14 Channel table ptr reg */ -#define maltxctp15r (MAL_DCR_BASE+0x2F) /* TX 15 Channel table ptr reg */ -#define maltxctp16r (MAL_DCR_BASE+0x30) /* TX 16 Channel table ptr reg */ -#define maltxctp17r (MAL_DCR_BASE+0x31) /* TX 17 Channel table ptr reg */ -#define maltxctp18r (MAL_DCR_BASE+0x32) /* TX 18 Channel table ptr reg */ -#define maltxctp19r (MAL_DCR_BASE+0x33) /* TX 19 Channel table ptr reg */ -#define maltxctp20r (MAL_DCR_BASE+0x34) /* TX 20 Channel table ptr reg */ -#define maltxctp21r (MAL_DCR_BASE+0x35) /* TX 21 Channel table ptr reg */ -#define maltxctp22r (MAL_DCR_BASE+0x36) /* TX 22 Channel table ptr reg */ -#define maltxctp23r (MAL_DCR_BASE+0x37) /* TX 23 Channel table ptr reg */ -#define maltxctp24r (MAL_DCR_BASE+0x38) /* TX 24 Channel table ptr reg */ -#define maltxctp25r (MAL_DCR_BASE+0x39) /* TX 25 Channel table ptr reg */ -#define maltxctp26r (MAL_DCR_BASE+0x3A) /* TX 26 Channel table ptr reg */ -#define maltxctp27r (MAL_DCR_BASE+0x3B) /* TX 27 Channel table ptr reg */ -#define maltxctp28r (MAL_DCR_BASE+0x3C) /* TX 28 Channel table ptr reg */ -#define maltxctp29r (MAL_DCR_BASE+0x3D) /* TX 29 Channel table ptr reg */ -#define maltxctp30r (MAL_DCR_BASE+0x3E) /* TX 30 Channel table ptr reg */ -#define maltxctp31r (MAL_DCR_BASE+0x3F) /* TX 31 Channel table ptr reg */ -#define malrxctp0r (MAL_DCR_BASE+0x40) /* RX 0 Channel table ptr reg */ -#define malrxctp1r (MAL_DCR_BASE+0x41) /* RX 1 Channel table ptr reg */ -#define malrxctp2r (MAL_DCR_BASE+0x42) /* RX 2 Channel table ptr reg */ -#define malrxctp3r (MAL_DCR_BASE+0x43) /* RX 3 Channel table ptr reg */ -#define malrxctp4r (MAL_DCR_BASE+0x44) /* RX 4 Channel table ptr reg */ -#define malrxctp5r (MAL_DCR_BASE+0x45) /* RX 5 Channel table ptr reg */ -#define malrxctp6r (MAL_DCR_BASE+0x46) /* RX 6 Channel table ptr reg */ -#define malrxctp7r (MAL_DCR_BASE+0x47) /* RX 7 Channel table ptr reg */ -#define malrxctp8r (MAL_DCR_BASE+0x48) /* RX 8 Channel table ptr reg */ -#define malrxctp9r (MAL_DCR_BASE+0x49) /* RX 9 Channel table ptr reg */ -#define malrxctp10r (MAL_DCR_BASE+0x4A) /* RX 10 Channel table ptr reg */ -#define malrxctp11r (MAL_DCR_BASE+0x4B) /* RX 11 Channel table ptr reg */ -#define malrxctp12r (MAL_DCR_BASE+0x4C) /* RX 12 Channel table ptr reg */ -#define malrxctp13r (MAL_DCR_BASE+0x4D) /* RX 13 Channel table ptr reg */ -#define malrxctp14r (MAL_DCR_BASE+0x4E) /* RX 14 Channel table ptr reg */ -#define malrxctp15r (MAL_DCR_BASE+0x4F) /* RX 15 Channel table ptr reg */ -#define malrxctp16r (MAL_DCR_BASE+0x50) /* RX 16 Channel table ptr reg */ -#define malrxctp17r (MAL_DCR_BASE+0x51) /* RX 17 Channel table ptr reg */ -#define malrxctp18r (MAL_DCR_BASE+0x52) /* RX 18 Channel table ptr reg */ -#define malrxctp19r (MAL_DCR_BASE+0x53) /* RX 19 Channel table ptr reg */ -#define malrxctp20r (MAL_DCR_BASE+0x54) /* RX 20 Channel table ptr reg */ -#define malrxctp21r (MAL_DCR_BASE+0x55) /* RX 21 Channel table ptr reg */ -#define malrxctp22r (MAL_DCR_BASE+0x56) /* RX 22 Channel table ptr reg */ -#define malrxctp23r (MAL_DCR_BASE+0x57) /* RX 23 Channel table ptr reg */ -#define malrxctp24r (MAL_DCR_BASE+0x58) /* RX 24 Channel table ptr reg */ -#define malrxctp25r (MAL_DCR_BASE+0x59) /* RX 25 Channel table ptr reg */ -#define malrxctp26r (MAL_DCR_BASE+0x5A) /* RX 26 Channel table ptr reg */ -#define malrxctp27r (MAL_DCR_BASE+0x5B) /* RX 27 Channel table ptr reg */ -#define malrxctp28r (MAL_DCR_BASE+0x5C) /* RX 28 Channel table ptr reg */ -#define malrxctp29r (MAL_DCR_BASE+0x5D) /* RX 29 Channel table ptr reg */ -#define malrxctp30r (MAL_DCR_BASE+0x5E) /* RX 30 Channel table ptr reg */ -#define malrxctp31r (MAL_DCR_BASE+0x5F) /* RX 31 Channel table ptr reg */ -#define malrcbs0 (MAL_DCR_BASE+0x60) /* RX 0 Channel buffer size reg */ -#define malrcbs1 (MAL_DCR_BASE+0x61) /* RX 1 Channel buffer size reg */ -#define malrcbs2 (MAL_DCR_BASE+0x62) /* RX 2 Channel buffer size reg */ -#define malrcbs3 (MAL_DCR_BASE+0x63) /* RX 3 Channel buffer size reg */ -#define malrcbs4 (MAL_DCR_BASE+0x64) /* RX 4 Channel buffer size reg */ -#define malrcbs5 (MAL_DCR_BASE+0x65) /* RX 5 Channel buffer size reg */ -#define malrcbs6 (MAL_DCR_BASE+0x66) /* RX 6 Channel buffer size reg */ -#define malrcbs7 (MAL_DCR_BASE+0x67) /* RX 7 Channel buffer size reg */ -#define malrcbs8 (MAL_DCR_BASE+0x68) /* RX 8 Channel buffer size reg */ -#define malrcbs9 (MAL_DCR_BASE+0x69) /* RX 9 Channel buffer size reg */ -#define malrcbs10 (MAL_DCR_BASE+0x6A) /* RX 10 Channel buffer size reg */ -#define malrcbs11 (MAL_DCR_BASE+0x6B) /* RX 11 Channel buffer size reg */ -#define malrcbs12 (MAL_DCR_BASE+0x6C) /* RX 12 Channel buffer size reg */ -#define malrcbs13 (MAL_DCR_BASE+0x6D) /* RX 13 Channel buffer size reg */ -#define malrcbs14 (MAL_DCR_BASE+0x6E) /* RX 14 Channel buffer size reg */ -#define malrcbs15 (MAL_DCR_BASE+0x6F) /* RX 15 Channel buffer size reg */ -#define malrcbs16 (MAL_DCR_BASE+0x70) /* RX 16 Channel buffer size reg */ -#define malrcbs17 (MAL_DCR_BASE+0x71) /* RX 17 Channel buffer size reg */ -#define malrcbs18 (MAL_DCR_BASE+0x72) /* RX 18 Channel buffer size reg */ -#define malrcbs19 (MAL_DCR_BASE+0x73) /* RX 19 Channel buffer size reg */ -#define malrcbs20 (MAL_DCR_BASE+0x74) /* RX 20 Channel buffer size reg */ -#define malrcbs21 (MAL_DCR_BASE+0x75) /* RX 21 Channel buffer size reg */ -#define malrcbs22 (MAL_DCR_BASE+0x76) /* RX 22 Channel buffer size reg */ -#define malrcbs23 (MAL_DCR_BASE+0x77) /* RX 23 Channel buffer size reg */ -#define malrcbs24 (MAL_DCR_BASE+0x78) /* RX 24 Channel buffer size reg */ -#define malrcbs25 (MAL_DCR_BASE+0x79) /* RX 25 Channel buffer size reg */ -#define malrcbs26 (MAL_DCR_BASE+0x7A) /* RX 26 Channel buffer size reg */ -#define malrcbs27 (MAL_DCR_BASE+0x7B) /* RX 27 Channel buffer size reg */ -#define malrcbs28 (MAL_DCR_BASE+0x7C) /* RX 28 Channel buffer size reg */ -#define malrcbs29 (MAL_DCR_BASE+0x7D) /* RX 29 Channel buffer size reg */ -#define malrcbs30 (MAL_DCR_BASE+0x7E) /* RX 30 Channel buffer size reg */ -#define malrcbs31 (MAL_DCR_BASE+0x7F) /* RX 31 Channel buffer size reg */ - -#else /* !defined(CONFIG_405EZ) */ - -#define MAL_DCR_BASE 0x180 -#define malmcr (MAL_DCR_BASE+0x00) /* MAL Config reg */ -#define malesr (MAL_DCR_BASE+0x01) /* Error Status reg (Read/Clear) */ -#define malier (MAL_DCR_BASE+0x02) /* Interrupt enable reg */ -#define maldbr (MAL_DCR_BASE+0x03) /* Mal Debug reg (Read only) */ -#define maltxcasr (MAL_DCR_BASE+0x04) /* TX Channel active reg (set) */ -#define maltxcarr (MAL_DCR_BASE+0x05) /* TX Channel active reg (Reset) */ -#define maltxeobisr (MAL_DCR_BASE+0x06) /* TX End of buffer int status reg */ -#define maltxdeir (MAL_DCR_BASE+0x07) /* TX Descr. Error Int reg */ -#define malrxcasr (MAL_DCR_BASE+0x10) /* RX Channel active reg (set) */ -#define malrxcarr (MAL_DCR_BASE+0x11) /* RX Channel active reg (Reset) */ -#define malrxeobisr (MAL_DCR_BASE+0x12) /* RX End of buffer int status reg */ -#define malrxdeir (MAL_DCR_BASE+0x13) /* RX Descr. Error Int reg */ -#define maltxctp0r (MAL_DCR_BASE+0x20) /* TX 0 Channel table pointer reg */ -#define maltxctp1r (MAL_DCR_BASE+0x21) /* TX 1 Channel table pointer reg */ -#define maltxctp2r (MAL_DCR_BASE+0x22) /* TX 2 Channel table pointer reg */ -#define malrxctp0r (MAL_DCR_BASE+0x40) /* RX 0 Channel table pointer reg */ -#define malrxctp1r (MAL_DCR_BASE+0x41) /* RX 1 Channel table pointer reg */ -#define malrcbs0 (MAL_DCR_BASE+0x60) /* RX 0 Channel buffer size reg */ -#define malrcbs1 (MAL_DCR_BASE+0x61) /* RX 1 Channel buffer size reg */ -#endif /* defined(CONFIG_405EZ) */ +#else +#define MAL_DCR_BASE 0x180 +#endif +#define MAL0_CFG (MAL_DCR_BASE + 0x00) /* MAL Config reg */ +#define MAL0_ESR (MAL_DCR_BASE + 0x01) /* Err Status (Read/Clear) */ +#define MAL0_IER (MAL_DCR_BASE + 0x02) /* Interrupt enable */ +#define MAL0_TXCASR (MAL_DCR_BASE + 0x04) /* TX Channel active (set) */ +#define MAL0_TXCARR (MAL_DCR_BASE + 0x05) /* TX Channel active (reset) */ +#define MAL0_TXEOBISR (MAL_DCR_BASE + 0x06) /* TX End of buffer int status */ +#define MAL0_TXDEIR (MAL_DCR_BASE + 0x07) /* TX Descr. Error Int reg */ +#define MAL0_RXCASR (MAL_DCR_BASE + 0x10) /* RX Channel active (set) */ +#define MAL0_RXCARR (MAL_DCR_BASE + 0x11) /* RX Channel active (reset) */ +#define MAL0_RXEOBISR (MAL_DCR_BASE + 0x12) /* RX End of buffer int status */ +#define MAL0_RXDEIR (MAL_DCR_BASE + 0x13) /* RX Descr. Error Int reg */ +#define MAL0_TXCTP0R (MAL_DCR_BASE + 0x20) /* TX 0 Channel table ptr */ +#define MAL0_TXCTP1R (MAL_DCR_BASE + 0x21) /* TX 1 Channel table ptr */ +#define MAL0_TXCTP2R (MAL_DCR_BASE + 0x22) /* TX 2 Channel table ptr */ +#define MAL0_TXCTP3R (MAL_DCR_BASE + 0x23) /* TX 3 Channel table ptr */ +#define MAL0_RXCTP0R (MAL_DCR_BASE + 0x40) /* RX 0 Channel table ptr */ +#define MAL0_RXCTP1R (MAL_DCR_BASE + 0x41) /* RX 1 Channel table ptr */ +#define MAL0_RXCTP2R (MAL_DCR_BASE + 0x42) /* RX 2 Channel table ptr */ +#define MAL0_RXCTP3R (MAL_DCR_BASE + 0x43) /* RX 3 Channel table ptr */ +#define MAL0_RXCTP8R (MAL_DCR_BASE + 0x48) /* RX 8 Channel table ptr */ +#define MAL0_RXCTP16R (MAL_DCR_BASE + 0x50) /* RX 16 Channel table ptr */ +#define MAL0_RXCTP24R (MAL_DCR_BASE + 0x58) /* RX 24 Channel table ptr */ +#define MAL0_RCBS0 (MAL_DCR_BASE + 0x60) /* RX 0 Channel buffer size */ +#define MAL0_RCBS1 (MAL_DCR_BASE + 0x61) /* RX 1 Channel buffer size */ +#define MAL0_RCBS2 (MAL_DCR_BASE + 0x62) /* RX 2 Channel buffer size */ +#define MAL0_RCBS3 (MAL_DCR_BASE + 0x63) /* RX 3 Channel buffer size */ +#define MAL0_RCBS8 (MAL_DCR_BASE + 0x68) /* RX 8 Channel buffer size */ +#define MAL0_RCBS16 (MAL_DCR_BASE + 0x70) /* RX 16 Channel buffer size */ +#define MAL0_RCBS24 (MAL_DCR_BASE + 0x78) /* RX 24 Channel buffer size */ /*----------------------------------------------------------------------------- | IIC Register Offsets @@ -703,7 +578,7 @@ #define IICEXTSTS 0x09 #define IICLSADR 0x0A #define IICHSADR 0x0B -#define IICCLKDIV 0x0C +#define IIC0_CLKDIV 0x0C #define IICINTRMSK 0x0D #define IICXFRCNT 0x0E #define IICXTCNTLSS 0x0F @@ -728,27 +603,19 @@ ******************************************************************************/ #if defined(CONFIG_405EZ) #define OCM_DCR_BASE 0x020 -#define ocmplb3cr1 (OCM_DCR_BASE+0x00) /* OCM PLB3 Bank 1 Config Reg */ -#define ocmplb3cr2 (OCM_DCR_BASE+0x01) /* OCM PLB3 Bank 2 Config Reg */ -#define ocmplb3bear (OCM_DCR_BASE+0x02) /* OCM PLB3 Bus Error Add Reg */ -#define ocmplb3besr0 (OCM_DCR_BASE+0x03) /* OCM PLB3 Bus Error Stat Reg 0 */ -#define ocmplb3besr1 (OCM_DCR_BASE+0x04) /* OCM PLB3 Bus Error Stat Reg 1 */ -#define ocmcid (OCM_DCR_BASE+0x05) /* OCM Core ID */ -#define ocmrevid (OCM_DCR_BASE+0x06) /* OCM Revision ID */ -#define ocmplb3dpc (OCM_DCR_BASE+0x07) /* OCM PLB3 Data Parity Check */ -#define ocmdscr1 (OCM_DCR_BASE+0x08) /* OCM D-side Bank 1 Config Reg */ -#define ocmdscr2 (OCM_DCR_BASE+0x09) /* OCM D-side Bank 2 Config Reg */ -#define ocmiscr1 (OCM_DCR_BASE+0x0A) /* OCM I-side Bank 1 Config Reg */ -#define ocmiscr2 (OCM_DCR_BASE+0x0B) /* OCM I-side Bank 2 Config Reg */ -#define ocmdsisdpc (OCM_DCR_BASE+0x0C) /* OCM D-side/I-side Data Par Chk*/ -#define ocmdsisbear (OCM_DCR_BASE+0x0D) /* OCM D-side/I-side Bus Err Addr*/ -#define ocmdsisbesr (OCM_DCR_BASE+0x0E) /* OCM D-side/I-side Bus Err Stat*/ +#define OCM0_PLBCR1 (OCM_DCR_BASE + 0x00) /* OCM PLB3 Bank 1 Config */ +#define OCM0_PLBCR2 (OCM_DCR_BASE + 0x01) /* OCM PLB3 Bank 2 Config */ +#define OCM0_PLBBEAR (OCM_DCR_BASE + 0x02) /* OCM PLB3 Bus Error Add */ +#define OCM0_DSRC1 (OCM_DCR_BASE + 0x08) /* OCM D-side Bank 1 Config */ +#define OCM0_DSRC2 (OCM_DCR_BASE + 0x09) /* OCM D-side Bank 2 Config */ +#define OCM0_ISRC1 (OCM_DCR_BASE + 0x0A) /* OCM I-side Bank 1Config */ +#define OCM0_ISRC2 (OCM_DCR_BASE + 0x0B) /* OCM I-side Bank 2 Config */ +#define OCM0_DISDPC (OCM_DCR_BASE + 0x0C) /* OCM D-/I-side Data Par Chk */ #else #define OCM_DCR_BASE 0x018 -#define ocmisarc (OCM_DCR_BASE+0x00) /* OCM I-side address compare reg */ -#define ocmiscntl (OCM_DCR_BASE+0x01) /* OCM I-side control reg */ -#define ocmdsarc (OCM_DCR_BASE+0x02) /* OCM D-side address compare reg */ -#define ocmdscntl (OCM_DCR_BASE+0x03) /* OCM D-side control reg */ +#define OCM0_ISCNTL (OCM_DCR_BASE+0x01) /* OCM I-side control reg */ +#define OCM0_DSARC (OCM_DCR_BASE+0x02) /* OCM D-side address compare */ +#define OCM0_DSCNTL (OCM_DCR_BASE+0x03) /* OCM D-side control */ #endif /* CONFIG_405EZ */ /****************************************************************************** @@ -874,77 +741,75 @@ #define SDR0_SRST_AHB PPC_REG_VAL(30, 1) #define SDR0_SRST_NDFC PPC_REG_VAL(31, 1) -#define sdr_uart0 0x0120 /* UART0 Config */ -#define sdr_uart1 0x0121 /* UART1 Config */ -#define sdr_mfr 0x4300 /* SDR0_MFR reg */ +#define SDR0_UART0 0x0120 /* UART0 Config */ +#define SDR0_UART1 0x0121 /* UART1 Config */ +#define SDR0_MFR 0x4300 /* SDR0_MFR reg */ /* Defines for CPC0_EPRCSR register */ -#define CPC0_EPRCSR_E0NFE 0x80000000 -#define CPC0_EPRCSR_E1NFE 0x40000000 -#define CPC0_EPRCSR_E1RPP 0x00000080 -#define CPC0_EPRCSR_E0RPP 0x00000040 -#define CPC0_EPRCSR_E1ERP 0x00000020 -#define CPC0_EPRCSR_E0ERP 0x00000010 -#define CPC0_EPRCSR_E1PCI 0x00000002 -#define CPC0_EPRCSR_E0PCI 0x00000001 - -#define cpr0_clkupd 0x020 -#define cpr0_pllc 0x040 -#define cpr0_plld 0x060 -#define cpr0_cpud 0x080 -#define cpr0_plbd 0x0a0 -#define cpr0_opbd 0x0c0 -#define cpr0_perd 0x0e0 -#define cpr0_ahbd 0x100 -#define cpr0_icfg 0x140 - -#define SDR_PINSTP 0x0040 -#define sdr_sdcs 0x0060 +#define CPC0_EPRCSR_E0NFE 0x80000000 +#define CPC0_EPRCSR_E1NFE 0x40000000 +#define CPC0_EPRCSR_E1RPP 0x00000080 +#define CPC0_EPRCSR_E0RPP 0x00000040 +#define CPC0_EPRCSR_E1ERP 0x00000020 +#define CPC0_EPRCSR_E0ERP 0x00000010 +#define CPC0_EPRCSR_E1PCI 0x00000002 +#define CPC0_EPRCSR_E0PCI 0x00000001 + +#define CPR0_CLKUPD 0x020 +#define CPR0_PLLC 0x040 +#define CPR0_PLLD 0x060 +#define CPR0_CPUD 0x080 +#define CPR0_PLBD 0x0a0 +#define CPR0_OPBD0 0x0c0 +#define CPR0_PERD 0x0e0 + +#define SDR0_PINSTP 0x0040 +#define SDR0_SDCS0 0x0060 #define SDR0_SDCS_SDD (0x80000000 >> 31) /* CUST0 Customer Configuration Register0 */ #define SDR0_CUST0 0x4000 -#define SDR0_CUST0_MUX_E_N_G_MASK 0xC0000000 /* Mux_Emac_NDFC_GPIO */ -#define SDR0_CUST0_MUX_EMAC_SEL 0x40000000 /* Emac Selection */ -#define SDR0_CUST0_MUX_NDFC_SEL 0x80000000 /* NDFC Selection */ -#define SDR0_CUST0_MUX_GPIO_SEL 0xC0000000 /* GPIO Selection */ - -#define SDR0_CUST0_NDFC_EN_MASK 0x20000000 /* NDFC Enable Mask */ -#define SDR0_CUST0_NDFC_ENABLE 0x20000000 /* NDFC Enable */ -#define SDR0_CUST0_NDFC_DISABLE 0x00000000 /* NDFC Disable */ - -#define SDR0_CUST0_NDFC_BW_MASK 0x10000000 /* NDFC Boot Width */ -#define SDR0_CUST0_NDFC_BW_16_BIT 0x10000000 /* NDFC Boot Width = 16 Bit */ -#define SDR0_CUST0_NDFC_BW_8_BIT 0x00000000 /* NDFC Boot Width = 8 Bit */ - -#define SDR0_CUST0_NDFC_BP_MASK 0x0F000000 /* NDFC Boot Page */ -#define SDR0_CUST0_NDFC_BP_ENCODE(n) ((((unsigned long)(n))&0xF)<<24) -#define SDR0_CUST0_NDFC_BP_DECODE(n) ((((unsigned long)(n))>>24)&0x0F) - -#define SDR0_CUST0_NDFC_BAC_MASK 0x00C00000 /* NDFC Boot Address Cycle */ -#define SDR0_CUST0_NDFC_BAC_ENCODE(n) ((((unsigned long)(n))&0x3)<<22) -#define SDR0_CUST0_NDFC_BAC_DECODE(n) ((((unsigned long)(n))>>22)&0x03) - -#define SDR0_CUST0_NDFC_ARE_MASK 0x00200000 /* NDFC Auto Read Enable */ -#define SDR0_CUST0_NDFC_ARE_ENABLE 0x00200000 /* NDFC Auto Read Enable */ -#define SDR0_CUST0_NDFC_ARE_DISABLE 0x00000000 /* NDFC Auto Read Disable */ - -#define SDR0_CUST0_NRB_MASK 0x00100000 /* NDFC Ready / Busy */ -#define SDR0_CUST0_NRB_BUSY 0x00100000 /* Busy */ -#define SDR0_CUST0_NRB_READY 0x00000000 /* Ready */ - -#define SDR0_CUST0_NDRSC_MASK 0x0000FFF0 /* NDFC Device Reset Count Mask */ -#define SDR0_CUST0_NDRSC_ENCODE(n) ((((unsigned long)(n))&0xFFF)<<4) -#define SDR0_CUST0_NDRSC_DECODE(n) ((((unsigned long)(n))>>4)&0xFFF) - -#define SDR0_CUST0_CHIPSELGAT_MASK 0x0000000F /* Chip Select Gating Mask */ -#define SDR0_CUST0_CHIPSELGAT_DIS 0x00000000 /* Chip Select Gating Disable */ -#define SDR0_CUST0_CHIPSELGAT_ENALL 0x0000000F /* All Chip Select Gating Enable */ -#define SDR0_CUST0_CHIPSELGAT_EN0 0x00000008 /* Chip Select0 Gating Enable */ -#define SDR0_CUST0_CHIPSELGAT_EN1 0x00000004 /* Chip Select1 Gating Enable */ -#define SDR0_CUST0_CHIPSELGAT_EN2 0x00000002 /* Chip Select2 Gating Enable */ -#define SDR0_CUST0_CHIPSELGAT_EN3 0x00000001 /* Chip Select3 Gating Enable */ +#define SDR0_CUST0_MUX_E_N_G_MASK 0xC0000000 /* Mux_Emac_NDFC_GPIO */ +#define SDR0_CUST0_MUX_EMAC_SEL 0x40000000 /* Emac Selection */ +#define SDR0_CUST0_MUX_NDFC_SEL 0x80000000 /* NDFC Selection */ +#define SDR0_CUST0_MUX_GPIO_SEL 0xC0000000 /* GPIO Selection */ + +#define SDR0_CUST0_NDFC_EN_MASK 0x20000000 /* NDFC Enable Mask */ +#define SDR0_CUST0_NDFC_ENABLE 0x20000000 /* NDFC Enable */ +#define SDR0_CUST0_NDFC_DISABLE 0x00000000 /* NDFC Disable */ + +#define SDR0_CUST0_NDFC_BW_MASK 0x10000000 /* NDFC Boot Width */ +#define SDR0_CUST0_NDFC_BW_16_BIT 0x10000000 /* NDFC Boot Width= 16 Bit */ +#define SDR0_CUST0_NDFC_BW_8_BIT 0x00000000 /* NDFC Boot Width= 8 Bit */ + +#define SDR0_CUST0_NDFC_BP_MASK 0x0F000000 /* NDFC Boot Page */ +#define SDR0_CUST0_NDFC_BP_ENCODE(n) ((((unsigned long)(n))&0xF)<<24) +#define SDR0_CUST0_NDFC_BP_DECODE(n) ((((unsigned long)(n))>>24)&0x0F) + +#define SDR0_CUST0_NDFC_BAC_MASK 0x00C00000 /* NDFC Boot Address Cycle */ +#define SDR0_CUST0_NDFC_BAC_ENCODE(n) ((((unsigned long)(n))&0x3)<<22) +#define SDR0_CUST0_NDFC_BAC_DECODE(n) ((((unsigned long)(n))>>22)&0x03) + +#define SDR0_CUST0_NDFC_ARE_MASK 0x00200000 /* NDFC Auto Read Enable */ +#define SDR0_CUST0_NDFC_ARE_ENABLE 0x00200000 /* NDFC Auto Read Enable */ +#define SDR0_CUST0_NDFC_ARE_DISABLE 0x00000000 /* NDFC Auto Read Disable */ + +#define SDR0_CUST0_NRB_MASK 0x00100000 /* NDFC Ready / Busy */ +#define SDR0_CUST0_NRB_BUSY 0x00100000 /* Busy */ +#define SDR0_CUST0_NRB_READY 0x00000000 /* Ready */ + +#define SDR0_CUST0_NDRSC_MASK 0x0000FFF0 /* NDFC Device Reset Count Mask */ +#define SDR0_CUST0_NDRSC_ENCODE(n) ((((unsigned long)(n))&0xFFF)<<4) +#define SDR0_CUST0_NDRSC_DECODE(n) ((((unsigned long)(n))>>4)&0xFFF) + +#define SDR0_CUST0_CHIPSELGAT_MASK 0x0000000F /* Chip Sel Gating Mask */ +#define SDR0_CUST0_CHIPSELGAT_DIS 0x00000000 /* Chip Sel Gating Disable */ +#define SDR0_CUST0_CHIPSELGAT_ENALL 0x0000000F /* All Chip Sel Gating Enable */ +#define SDR0_CUST0_CHIPSELGAT_EN0 0x00000008 /* Chip Sel0 Gating Enable */ +#define SDR0_CUST0_CHIPSELGAT_EN1 0x00000004 /* Chip Sel1 Gating Enable */ +#define SDR0_CUST0_CHIPSELGAT_EN2 0x00000002 /* Chip Sel2 Gating Enable */ +#define SDR0_CUST0_CHIPSELGAT_EN3 0x00000001 /* Chip Sel3 Gating Enable */ #define SDR0_PFC0 0x4100 #define SDR0_PFC1 0x4101