X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fspi_flash.h;h=f3c4e834247a0de3e1ca791643f3e38a16b35d00;hb=b43679482b06d476d908033b176f64c156f69b5e;hp=218283fc987cc6380f86695a1f17cbb7679f0421;hpb=b8d7652c81689a69bc6eaa206cf875bbe632831c;p=u-boot

diff --git a/include/spi_flash.h b/include/spi_flash.h
index 218283fc98..f3c4e83424 100644
--- a/include/spi_flash.h
+++ b/include/spi_flash.h
@@ -4,12 +4,7 @@
  * Copyright (C) 2008 Atmel Corporation
  * Copyright (C) 2013 Jagannadha Sutradharudu Teki, Xilinx Inc.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
+ * SPDX-License-Identifier:	GPL-2.0
  */
 
 #ifndef _SPI_FLASH_H_
@@ -37,22 +32,26 @@ struct spi_slave;
  * struct spi_flash - SPI flash structure
  *
  * @spi:		SPI slave
+ * @dev:		SPI flash device
  * @name:		Name of SPI flash
- * @dual_flash:	Indicates dual flash memories - dual stacked, parallel
+ * @dual_flash:		Indicates dual flash memories - dual stacked, parallel
  * @shift:		Flash shift useful in dual parallel
+ * @flags:		Indication of spi flash flags
  * @size:		Total flash size
  * @page_size:		Write (page) size
  * @sector_size:	Sector size
- * @erase_size:	Erase size
+ * @erase_size:		Erase size
  * @bank_read_cmd:	Bank read cmd
  * @bank_write_cmd:	Bank write cmd
  * @bank_curr:		Current flash bank
- * @poll_cmd:		Poll cmd - for flash erase/program
  * @erase_cmd:		Erase cmd 4K, 32K, 64K
  * @read_cmd:		Read cmd - Array Fast, Extn read and quad read.
  * @write_cmd:		Write cmd - page and quad program.
- * @dummy_byte:	Dummy cycles for read operation.
- * @memory_map:	Address of read-only SPI flash access
+ * @dummy_byte:		Dummy cycles for read operation.
+ * @memory_map:		Address of read-only SPI flash access
+ * @flash_lock:		lock a region of the SPI Flash
+ * @flash_unlock:	unlock a region of the SPI Flash
+ * @flash_is_locked:	check if a region of the SPI Flash is completely locked
  * @read:		Flash read ops: Read len bytes at offset into buf
  *			Supported cmds: Fast Array Read
  * @write:		Flash write ops: Write len bytes from buf into offset
@@ -62,15 +61,14 @@ struct spi_slave;
  * return 0 - Success, 1 - Failure
  */
 struct spi_flash {
-#ifdef CONFIG_DM_SPI_FLASH
 	struct spi_slave *spi;
+#ifdef CONFIG_DM_SPI_FLASH
 	struct udevice *dev;
-#else
-	struct spi_slave *spi;
 #endif
 	const char *name;
 	u8 dual_flash;
 	u8 shift;
+	u16 flags;
 
 	u32 size;
 	u32 page_size;
@@ -81,23 +79,26 @@ struct spi_flash {
 	u8 bank_write_cmd;
 	u8 bank_curr;
 #endif
-	u8 poll_cmd;
 	u8 erase_cmd;
 	u8 read_cmd;
 	u8 write_cmd;
 	u8 dummy_byte;
 
 	void *memory_map;
+
+	int (*flash_lock)(struct spi_flash *flash, u32 ofs, size_t len);
+	int (*flash_unlock)(struct spi_flash *flash, u32 ofs, size_t len);
+	int (*flash_is_locked)(struct spi_flash *flash, u32 ofs, size_t len);
 #ifndef CONFIG_DM_SPI_FLASH
 	/*
 	 * These are not strictly needed for driver model, but keep them here
-	 * whilt the transition is in progress.
+	 * while the transition is in progress.
 	 *
 	 * Normally each driver would provide its own operations, but for
 	 * SPI flash most chips use the same algorithms. One approach is
 	 * to create a 'common' SPI flash device which knows how to talk
 	 * to most devices, and then allow other drivers to be used instead
-	 * if requird, perhaps with a way of scanning through the list to
+	 * if required, perhaps with a way of scanning through the list to
 	 * find the driver that matches the device.
 	 */
 	int (*read)(struct spi_flash *flash, u32 offset, size_t len, void *buf);
@@ -164,8 +165,6 @@ struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
 /* Compatibility function - this is the old U-Boot API */
 void spi_flash_free(struct spi_flash *flash);
 
-int spi_flash_remove(struct udevice *flash);
-
 static inline int spi_flash_read(struct spi_flash *flash, u32 offset,
 				 size_t len, void *buf)
 {
@@ -195,18 +194,6 @@ void sandbox_sf_unbind_emul(struct sandbox_state *state, int busnum, int cs);
 struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
 		unsigned int max_hz, unsigned int spi_mode);
 
-/**
- * Set up a new SPI flash from an fdt node
- *
- * @param blob		Device tree blob
- * @param slave_node	Pointer to this SPI slave node in the device tree
- * @param spi_node	Cached pointer to the SPI interface this node belongs
- *			to
- * @return 0 if ok, -1 on error
- */
-struct spi_flash *spi_flash_probe_fdt(const void *blob, int slave_node,
-				      int spi_node);
-
 void spi_flash_free(struct spi_flash *flash);
 
 static inline int spi_flash_read(struct spi_flash *flash, u32 offset,
@@ -228,7 +215,16 @@ static inline int spi_flash_erase(struct spi_flash *flash, u32 offset,
 }
 #endif
 
-void spi_boot(void) __noreturn;
-void spi_spl_load_image(uint32_t offs, unsigned int size, void *vdst);
+static inline int spi_flash_protect(struct spi_flash *flash, u32 ofs, u32 len,
+					bool prot)
+{
+	if (!flash->flash_lock || !flash->flash_unlock)
+		return -EOPNOTSUPP;
+
+	if (prot)
+		return flash->flash_lock(flash, ofs, len);
+	else
+		return flash->flash_unlock(flash, ofs, len);
+}
 
 #endif /* _SPI_FLASH_H_ */