X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fstatus_led.h;h=5b3570166db5f23f0d8972cb1fffbc95a2a7efc3;hb=901af3e903c09c7681197a03367d82286f9f6e3f;hp=27f4bdfa8773b36233f7bdc57136c655d5908e5c;hpb=2ed3f9114300b1f11f1f30d9d2478146afc3af0e;p=u-boot

diff --git a/include/status_led.h b/include/status_led.h
index 27f4bdfa87..5b3570166d 100644
--- a/include/status_led.h
+++ b/include/status_led.h
@@ -1,8 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 /*
@@ -17,104 +16,63 @@
 #ifndef _STATUS_LED_H_
 #define	_STATUS_LED_H_
 
-#ifdef CONFIG_STATUS_LED
-
-#define STATUS_LED_OFF		0
-#define STATUS_LED_BLINKING	1
-#define STATUS_LED_ON		2
-
+#ifdef CONFIG_LED_STATUS
+
+#define LED_STATUS_PERIOD	(CONFIG_SYS_HZ / CONFIG_LED_STATUS_FREQ)
+#ifdef CONFIG_LED_STATUS1
+#define LED_STATUS_PERIOD1	(CONFIG_SYS_HZ / CONFIG_LED_STATUS_FREQ1)
+#endif /* CONFIG_LED_STATUS1 */
+#ifdef CONFIG_LED_STATUS2
+#define LED_STATUS_PERIOD2	(CONFIG_SYS_HZ / CONFIG_LED_STATUS_FREQ2)
+#endif /* CONFIG_LED_STATUS2 */
+#ifdef CONFIG_LED_STATUS3
+#define LED_STATUS_PERIOD3	(CONFIG_SYS_HZ / CONFIG_LED_STATUS_FREQ3)
+#endif /* CONFIG_LED_STATUS3 */
+#ifdef CONFIG_LED_STATUS4
+#define LED_STATUS_PERIOD4	(CONFIG_SYS_HZ / CONFIG_LED_STATUS_FREQ4)
+#endif /* CONFIG_LED_STATUS4 */
+#ifdef CONFIG_LED_STATUS5
+#define LED_STATUS_PERIOD5	(CONFIG_SYS_HZ / CONFIG_LED_STATUS_FREQ5)
+#endif /* CONFIG_LED_STATUS5 */
+
+void status_led_init(void);
 void status_led_tick (unsigned long timestamp);
 void status_led_set  (int led, int state);
 
-/*****  TQM8xxL  ********************************************************/
-#if defined(CONFIG_TQM8xxL)
-# define STATUS_LED_PAR		im_cpm.cp_pbpar
-# define STATUS_LED_DIR		im_cpm.cp_pbdir
-# define STATUS_LED_ODR		im_cpm.cp_pbodr
-# define STATUS_LED_DAT		im_cpm.cp_pbdat
-
-# define STATUS_LED_BIT		0x00000001
-# define STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 2)
-# define STATUS_LED_STATE	STATUS_LED_BLINKING
-
-# define STATUS_LED_ACTIVE	1		/* LED on for bit == 1	*/
-
-# define STATUS_LED_BOOT	0		/* LED 0 used for boot status */
-
 /*****  MVS v1  **********************************************************/
-#elif (defined(CONFIG_MVS) && CONFIG_MVS < 2)
+#if (defined(CONFIG_MVS) && CONFIG_MVS < 2)
 # define STATUS_LED_PAR		im_ioport.iop_pdpar
 # define STATUS_LED_DIR		im_ioport.iop_pddir
 # undef  STATUS_LED_ODR
 # define STATUS_LED_DAT		im_ioport.iop_pddat
 
-# define STATUS_LED_BIT		0x00000001
-# define STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 2)
-# define STATUS_LED_STATE	STATUS_LED_BLINKING
-
 # define STATUS_LED_ACTIVE	1		/* LED on for bit == 1	*/
 
-# define STATUS_LED_BOOT	0		/* LED 0 used for boot status */
-
 /*****  Someone else defines these  *************************************/
 #elif defined(STATUS_LED_PAR)
-
   /*
    * ADVICE: Define in your board configuration file rather than
    * filling this file up with lots of custom board stuff.
    */
 
-/*****  CMI   ********************************************************/
-#elif defined(CONFIG_CMI)
-# define STATUS_LED_DIR		im_mios.mios_mpiosm32ddr
-# define STATUS_LED_DAT		im_mios.mios_mpiosm32dr
-
-# define STATUS_LED_BIT		0x2000		/* Select one of the 16 possible*/
-						/* MIOS outputs */
-# define STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 2)	/* Blinking periode is 500 ms */
-# define STATUS_LED_STATE	STATUS_LED_BLINKING
-
-# define STATUS_LED_ACTIVE	1		/* LED on for bit == 0	*/
-# define STATUS_LED_BOOT	0		/* LED 0 used for boot status */
-
-#elif defined(CONFIG_V38B)
-
-# define STATUS_LED_BIT		0x0010			/* Timer7 GPIO */
-# define STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 2)
-# define STATUS_LED_STATE	STATUS_LED_BLINKING
-
-# define STATUS_LED_ACTIVE	0		/* LED on for bit == 0 */
-# define STATUS_LED_BOOT	0		/* LED 0 used for boot status */
-
-#elif defined(CONFIG_MOTIONPRO)
-
-#define STATUS_LED_BIT		((vu_long *) MPC5XXX_GPT6_ENABLE)
-#define STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 10)
-#define STATUS_LED_STATE	STATUS_LED_BLINKING
-
-#define STATUS_LED_BIT1		((vu_long *) MPC5XXX_GPT7_ENABLE)
-#define STATUS_LED_PERIOD1	(CONFIG_SYS_HZ / 10)
-#define STATUS_LED_STATE1	STATUS_LED_OFF
-
-#define STATUS_LED_BOOT		0	/* LED 0 used for boot status */
-
-#elif defined(CONFIG_BOARD_SPECIFIC_LED)
+#elif defined(CONFIG_LED_STATUS_BOARD_SPECIFIC)
 /* led_id_t is unsigned long mask */
 typedef unsigned long led_id_t;
 
 extern void __led_toggle (led_id_t mask);
 extern void __led_init (led_id_t mask, int state);
 extern void __led_set (led_id_t mask, int state);
+void __led_blink(led_id_t mask, int freq);
 #else
 # error Status LED configuration missing
 #endif
 /************************************************************************/
 
-#ifndef CONFIG_BOARD_SPECIFIC_LED
+#ifndef CONFIG_LED_STATUS_BOARD_SPECIFIC
 # include <asm/status_led.h>
 #endif
 
-#endif	/* CONFIG_STATUS_LED	*/
+#endif	/* CONFIG_LED_STATUS	*/
 
 /*
  * Coloured LEDs API