X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=include%2Fusb_defs.h;h=4f3601a16c3a487a05b6bcf8c31cda2d3bc27894;hb=6eaeba23ddc5ccde5c97ef919ffcbf44ecad73dd;hp=9502544b21bd1b41a034193de822f1345045acc7;hpb=dfe161032d007e4901064ab36b58f054126b1f35;p=u-boot

diff --git a/include/usb_defs.h b/include/usb_defs.h
index 9502544b21..4f3601a16c 100644
--- a/include/usb_defs.h
+++ b/include/usb_defs.h
@@ -150,6 +150,18 @@
 #define USB_REQ_SET_IDLE            0x0A
 #define USB_REQ_SET_PROTOCOL        0x0B
 
+/* Device features */
+#define USB_FEAT_HALT               0x00
+#define USB_FEAT_WAKEUP             0x01
+#define USB_FEAT_TEST               0x02
+
+/* Test modes */
+#define USB_TEST_MODE_J             0x01
+#define USB_TEST_MODE_K             0x02
+#define USB_TEST_MODE_SE0_NAK       0x03
+#define USB_TEST_MODE_PACKET        0x04
+#define USB_TEST_MODE_FORCE_ENABLE  0x05
+
 
 /* "pipe" definitions */
 
@@ -208,6 +220,18 @@
 #define USB_PORT_FEAT_C_SUSPEND      18
 #define USB_PORT_FEAT_C_OVER_CURRENT 19
 #define USB_PORT_FEAT_C_RESET        20
+#define USB_PORT_FEAT_TEST           21
+
+/*
+ * Changes to Port feature numbers for Super speed,
+ * from USB 3.0 spec Table 10-8
+ */
+#define USB_SS_PORT_FEAT_U1_TIMEOUT	23
+#define USB_SS_PORT_FEAT_U2_TIMEOUT	24
+#define USB_SS_PORT_FEAT_C_LINK_STATE	25
+#define USB_SS_PORT_FEAT_C_CONFIG_ERROR	26
+#define USB_SS_PORT_FEAT_BH_RESET	28
+#define USB_SS_PORT_FEAT_C_BH_RESET	29
 
 /* wPortStatus bits */
 #define USB_PORT_STAT_CONNECTION    0x0001
@@ -218,9 +242,19 @@
 #define USB_PORT_STAT_POWER         0x0100
 #define USB_PORT_STAT_LOW_SPEED     0x0200
 #define USB_PORT_STAT_HIGH_SPEED    0x0400	/* support for EHCI */
-#define USB_PORT_STAT_SPEED	\
+#define USB_PORT_STAT_SUPER_SPEED   0x0600	/* faking support to XHCI */
+#define USB_PORT_STAT_SPEED_MASK	\
 	(USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED)
 
+/*
+ * Changes to wPortStatus bit field in USB 3.0
+ * See USB 3.0 spec Table 10-11
+ */
+#define USB_SS_PORT_STAT_LINK_STATE	0x01e0
+#define USB_SS_PORT_STAT_POWER		0x0200
+#define USB_SS_PORT_STAT_SPEED		0x1c00
+#define USB_SS_PORT_STAT_SPEED_5GBPS	0x0000
+
 /* wPortChange bits */
 #define USB_PORT_STAT_C_CONNECTION  0x0001
 #define USB_PORT_STAT_C_ENABLE      0x0002
@@ -228,13 +262,21 @@
 #define USB_PORT_STAT_C_OVERCURRENT 0x0008
 #define USB_PORT_STAT_C_RESET       0x0010
 
+/*
+ * Changes to wPortChange bit fields in USB 3.0
+ * See USB 3.0 spec Table 10-12
+ */
+#define USB_SS_PORT_STAT_C_BH_RESET	0x0020
+#define USB_SS_PORT_STAT_C_LINK_STATE	0x0040
+#define USB_SS_PORT_STAT_C_CONFIG_ERROR	0x0080
+
 /* wHubCharacteristics (masks) */
 #define HUB_CHAR_LPSM               0x0003
 #define HUB_CHAR_COMPOUND           0x0004
 #define HUB_CHAR_OCPM               0x0018
 
 /*
- *Hub Status & Hub Change bit masks
+ * Hub Status & Hub Change bit masks
  */
 #define HUB_STATUS_LOCAL_POWER	0x0001
 #define HUB_STATUS_OVERCURRENT	0x0002