X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=lib%2FKconfig;h=1590f7afa40250cf3df678fccd57aecaa5e1e940;hb=fbe502e9aba098b5ad500d1cdb6b376f56f9ddbb;hp=09670f031c2453ec44d64a2e901d55eb7049f31d;hpb=be62fbf376261ab3a4ed5db3bf54d5df9e216d9f;p=u-boot

diff --git a/lib/Kconfig b/lib/Kconfig
index 09670f031c..1590f7afa4 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -1,5 +1,12 @@
 menu "Library routines"
 
+config BCH
+	bool "Enable Software based BCH ECC"
+	help
+	  Enables software based BCH ECC algorithm present in lib/bch.c
+	  This is used by SoC platforms which do not have built-in ELM
+	  hardware engine required for BCH ECC correction.
+
 config CC_OPTIMIZE_LIBS_FOR_SPEED
 	bool "Optimize libraries for speed"
 	help
@@ -8,9 +15,52 @@ config CC_OPTIMIZE_LIBS_FOR_SPEED
 
 	  If unsure, say N.
 
+config DYNAMIC_CRC_TABLE
+	bool "Enable Dynamic tables for CRC"
+	help
+	  Enable this option to calculate entries for CRC tables at runtime.
+	  This can be helpful when reducing the size of the build image
+
 config HAVE_PRIVATE_LIBGCC
 	bool
 
+config LIB_UUID
+	bool
+
+config PRINTF
+	bool
+	default y
+
+config SPL_PRINTF
+	bool
+	select SPL_SPRINTF
+	select SPL_STRTO if !USE_TINY_PRINTF
+
+config TPL_PRINTF
+	bool
+	select TPL_SPRINTF
+	select TPL_STRTO if !USE_TINY_PRINTF
+
+config SPRINTF
+	bool
+	default y
+
+config SPL_SPRINTF
+	bool
+
+config TPL_SPRINTF
+	bool
+
+config STRTO
+	bool
+	default y
+
+config SPL_STRTO
+	bool
+
+config TPL_STRTO
+	bool
+
 config USE_PRIVATE_LIBGCC
 	bool "Use private libgcc"
 	depends on HAVE_PRIVATE_LIBGCC
@@ -38,6 +88,16 @@ config USE_TINY_PRINTF
 
 	  The supported format specifiers are %c, %s, %u/%d and %x.
 
+config PANIC_HANG
+	bool "Do not reset the system on fatal error"
+	help
+	  Define this option to stop the system in case of a fatal error,
+	  so that you have to reset it manually. This is probably NOT a good
+	  idea for an embedded system where you want the system to reboot
+	  automatically as fast as possible, but it may be useful during
+	  development since you can try to debug the conditions that lead to
+	  the situation.
+
 config REGEX
 	bool "Enable regular expression support"
 	default y if NET
@@ -47,10 +107,22 @@ config REGEX
 	  regex support to some commands, for example "env grep" and
 	  "setexpr".
 
-config LIB_RAND
-	bool "Pseudo-random library support "
+choice
+	prompt "Pseudo-random library support type"
+	depends on NET_RANDOM_ETHADDR || RANDOM_UUID || CMD_UUID
+	default LIB_RAND
 	help
-	  This library provides pseudo-random number generator functions.
+	  Select the library to provide pseudo-random number generator
+	  functions.  LIB_HW_RAND supports certain hardware engines that
+	  provide this functionality.  If in doubt, select LIB_RAND.
+
+config LIB_RAND
+	bool "Pseudo-random library support"
+
+config LIB_HW_RAND
+	bool "HW Engine for random libray support"
+
+endchoice
 
 config SPL_TINY_MEMSET
 	bool "Use a very small memset() in SPL"
@@ -61,9 +133,21 @@ config SPL_TINY_MEMSET
 	  size-constrained envrionments even this may be too big. Enable this
 	  option to reduce code size slightly at the cost of some speed.
 
+config TPL_TINY_MEMSET
+	bool "Use a very small memset() in TPL"
+	help
+	  The faster memset() is the arch-specific one (if available) enabled
+	  by CONFIG_USE_ARCH_MEMSET. If that is not enabled, we can still get
+	  better performance by writing a word at a time. But in very
+	  size-constrained envrionments even this may be too big. Enable this
+	  option to reduce code size slightly at the cost of some speed.
+
 config RBTREE
 	bool
 
+config BITREVERSE
+	bool "Bit reverse library from Linux"
+
 source lib/dhry/Kconfig
 
 menu "Security support"
@@ -130,6 +214,9 @@ config SHA_PROG_HW_ACCEL
 config MD5
 	bool
 
+config CRC32C
+	bool
+
 endmenu
 
 menu "Compression Support"
@@ -157,7 +244,26 @@ config LZMA
 	  CONFIG_CMD_LZMADEC which provides a decode command.
 
 config LZO
+	bool "Enable LZO decompression support"
+	help
+	  This enables support for LZO compression algorithm.r
+
+config SPL_LZO
+	bool "Enable LZO decompression support in SPL"
+	help
+	  This enables support for LZO compression algorithm in the SPL.
+
+config SPL_GZIP
+	bool "Enable gzip decompression support for SPL build"
+	select SPL_ZLIB
+	help
+	  This enables support for GZIP compression altorithm for SPL boot.
+
+config SPL_ZLIB
 	bool
+	help
+	  This enables compression lib for SPL boot.
+
 endmenu
 
 config ERRNO_STR
@@ -174,12 +280,14 @@ config OF_LIBFDT
 	help
 	  This enables the FDT library (libfdt). It provides functions for
 	  accessing binary device tree images in memory, such as adding and
-	  removing notes and properties, scanning through the tree and finding
+	  removing nodes and properties, scanning through the tree and finding
 	  particular compatible nodes. The library operates on a flattened
 	  version of the device tree.
 
 config OF_LIBFDT_OVERLAY
 	bool "Enable the FDT library overlay support"
+	depends on OF_LIBFDT
+	default y if ARCH_OMAP2PLUS || ARCH_KEYSTONE
 	help
 	  This enables the FDT library (libfdt) overlay support.
 
@@ -189,7 +297,7 @@ config SPL_OF_LIBFDT
 	help
 	  This enables the FDT library (libfdt). It provides functions for
 	  accessing binary device tree images in memory, such as adding and
-	  removing notes and properties, scanning through the tree and finding
+	  removing nodes and properties, scanning through the tree and finding
 	  particular compatible nodes. The library operates on a flattened
 	  version of the device tree.
 
@@ -237,5 +345,6 @@ endmenu
 
 source lib/efi/Kconfig
 source lib/efi_loader/Kconfig
+source lib/optee/Kconfig
 
 endmenu