X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=lib_arm%2Fboard.c;h=22d573a39834e1c2a813bf73c672e3818b8b4660;hb=dafaede8a46c7159310239e036c93e31c6374487;hp=d37e5dab3524839af18a05ed920ce804537d0efb;hpb=93f798346033a1f6d22090b47abad4be88243b04;p=u-boot

diff --git a/lib_arm/board.c b/lib_arm/board.c
index d37e5dab35..22d573a398 100644
--- a/lib_arm/board.c
+++ b/lib_arm/board.c
@@ -46,10 +46,10 @@
 #include <net.h>
 
 #ifdef CONFIG_DRIVER_SMC91111
-#include "../drivers/smc91111.h"
+#include "../drivers/net/smc91111.h"
 #endif
 #ifdef CONFIG_DRIVER_LAN91C96
-#include "../drivers/lan91c96.h"
+#include "../drivers/net/lan91c96.h"
 #endif
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -58,6 +58,10 @@ DECLARE_GLOBAL_DATA_PTR;
 void nand_init (void);
 #endif
 
+#if defined(CONFIG_CMD_ONENAND)
+void onenand_init(void);
+#endif
+
 ulong monitor_flash_len;
 
 #ifdef CONFIG_HAS_DATAFLASH
@@ -80,6 +84,11 @@ extern void cs8900_get_enetaddr (uchar * addr);
 extern void rtl8019_get_enetaddr (uchar * addr);
 #endif
 
+#if defined(CONFIG_HARD_I2C) || \
+    defined(CONFIG_SOFT_I2C)
+#include <i2c.h>
+#endif
+
 /*
  * Begin and End of memory area for malloc(), and current "brk"
  */
@@ -111,6 +120,26 @@ void *sbrk (ptrdiff_t increment)
 	return ((void *) old);
 }
 
+/************************************************************************
+ * Coloured LED functionality
+ ************************************************************************
+ * May be supplied by boards if desired
+ */
+void inline __coloured_LED_init (void) {}
+void inline coloured_LED_init (void) __attribute__((weak, alias("__coloured_LED_init")));
+void inline __red_LED_on (void) {}
+void inline red_LED_on (void) __attribute__((weak, alias("__red_LED_on")));
+void inline __red_LED_off(void) {}
+void inline red_LED_off(void)	     __attribute__((weak, alias("__red_LED_off")));
+void inline __green_LED_on(void) {}
+void inline green_LED_on(void) __attribute__((weak, alias("__green_LED_on")));
+void inline __green_LED_off(void) {}
+void inline green_LED_off(void)__attribute__((weak, alias("__green_LED_off")));
+void inline __yellow_LED_on(void) {}
+void inline yellow_LED_on(void)__attribute__((weak, alias("__yellow_LED_on")));
+void inline __yellow_LED_off(void) {}
+void inline yellow_LED_off(void)__attribute__((weak, alias("__yellow_LED_off")));
+
 /************************************************************************
  * Init Utilities							*
  ************************************************************************
@@ -185,6 +214,15 @@ static void display_flash_config (ulong size)
 }
 #endif /* CFG_NO_FLASH */
 
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+static int init_func_i2c (void)
+{
+	puts ("I2C:   ");
+	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	puts ("ready\n");
+	return (0);
+}
+#endif
 
 /*
  * Breathe some life into the board...
@@ -227,6 +265,9 @@ init_fnc_t *init_sequence[] = {
 #endif
 #if defined(CONFIG_DISPLAY_BOARDINFO)
 	checkboard,		/* display board info */
+#endif
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+	init_func_i2c,
 #endif
 	dram_init,		/* configure available RAM banks */
 	display_dram_config,
@@ -301,6 +342,10 @@ void start_armboot (void)
 	nand_init();		/* go init the NAND */
 #endif
 
+#if defined(CONFIG_CMD_ONENAND)
+	onenand_init();
+#endif
+
 #ifdef CONFIG_HAS_DATAFLASH
 	AT91F_DataflashInit();
 	dataflash_print_info();
@@ -314,6 +359,10 @@ void start_armboot (void)
 	drv_vfd_init();
 #endif /* CONFIG_VFD */
 
+#ifdef CONFIG_SERIAL_MULTI
+	serial_initialize();
+#endif
+
 	/* IP Address */
 	gd->bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
 
@@ -399,6 +448,10 @@ extern void dm644x_eth_set_mac_addr (const u_int8_t *addr);
 	puts ("Net:   ");
 #endif
 	eth_initialize(gd->bd);
+#if defined(CONFIG_RESET_PHY_R)
+	debug ("Reset Ethernet PHY\n");
+	reset_phy();
+#endif
 #endif
 	/* main_loop() can return to retry autoboot, if so just run it again. */
 	for (;;) {