X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=lib_arm%2Fboard.c;h=a44d308f6728c631d92a9a886e62996ca86d9a3b;hb=52cb4d4fb3487313f5a72ea740f527a4aefaa365;hp=09eaaf25c4104d0ebdd4baedde1f8841ea4c730c;hpb=156feb90d200f186cdfd856d7f6f1878bb1bec1e;p=u-boot diff --git a/lib_arm/board.c b/lib_arm/board.c index 09eaaf25c4..a44d308f67 100644 --- a/lib_arm/board.c +++ b/lib_arm/board.c @@ -41,13 +41,14 @@ #include #include #include -#include +#include #include #include #include #include #include #include +#include #ifdef CONFIG_DRIVER_SMC91111 #include "../drivers/net/smc91111.h" @@ -73,7 +74,7 @@ const char version_string[] = U_BOOT_VERSION" (" U_BOOT_DATE " - " U_BOOT_TIME ")"CONFIG_IDENT_STRING; #ifdef CONFIG_DRIVER_CS8900 -extern void cs8900_get_enetaddr (uchar * addr); +extern void cs8900_get_enetaddr (void); #endif #ifdef CONFIG_DRIVER_RTL8019 @@ -136,6 +137,10 @@ void inline __yellow_LED_on(void) {} void inline yellow_LED_on(void)__attribute__((weak, alias("__yellow_LED_on"))); void inline __yellow_LED_off(void) {} void inline yellow_LED_off(void)__attribute__((weak, alias("__yellow_LED_off"))); +void inline __blue_LED_on(void) {} +void inline blue_LED_on(void)__attribute__((weak, alias("__blue_LED_on"))); +void inline __blue_LED_off(void) {} +void inline blue_LED_off(void)__attribute__((weak, alias("__blue_LED_off"))); /************************************************************************ * Init Utilities * @@ -258,12 +263,17 @@ static int arm_pci_init(void) */ typedef int (init_fnc_t) (void); -int print_cpuinfo (void); /* test-only */ +int print_cpuinfo (void); init_fnc_t *init_sequence[] = { - cpu_init, /* basic cpu dependent setup */ +#if defined(CONFIG_ARCH_CPU_INIT) + arch_cpu_init, /* basic arch cpu dependent setup */ +#endif board_init, /* basic board dependent setup */ +#if defined(CONFIG_USE_IRQ) interrupt_init, /* set up exceptions */ +#endif + timer_init, /* initialize timer */ env_init, /* initialize environment */ init_baudrate, /* initialze baudrate settings */ serial_init, /* serial communications setup */ @@ -313,6 +323,9 @@ void start_armboot (void) } } + /* armboot_start is defined in the board-specific linker script */ + mem_malloc_init (_armboot_start - CONFIG_SYS_MALLOC_LEN); + #ifndef CONFIG_SYS_NO_FLASH /* configure available FLASH banks */ display_flash_config (flash_init ()); @@ -347,9 +360,6 @@ void start_armboot (void) } #endif /* CONFIG_LCD */ - /* armboot_start is defined in the board-specific linker script */ - mem_malloc_init (_armboot_start - CONFIG_SYS_MALLOC_LEN); - #if defined(CONFIG_CMD_NAND) puts ("NAND: "); nand_init(); /* go init the NAND */ @@ -379,39 +389,7 @@ void start_armboot (void) /* IP Address */ gd->bd->bi_ip_addr = getenv_IPaddr ("ipaddr"); - /* MAC Address */ - { - int i; - ulong reg; - char *s, *e; - char tmp[64]; - - i = getenv_r ("ethaddr", tmp, sizeof (tmp)); - s = (i > 0) ? tmp : NULL; - - for (reg = 0; reg < 6; ++reg) { - gd->bd->bi_enetaddr[reg] = s ? simple_strtoul (s, &e, 16) : 0; - if (s) - s = (*e) ? e + 1 : e; - } - -#ifdef CONFIG_HAS_ETH1 - i = getenv_r ("eth1addr", tmp, sizeof (tmp)); - s = (i > 0) ? tmp : NULL; - - for (reg = 0; reg < 6; ++reg) { - gd->bd->bi_enet1addr[reg] = s ? simple_strtoul (s, &e, 16) : 0; - if (s) - s = (*e) ? e + 1 : e; - } -#endif - } - - devices_init (); /* get the devices list going. */ - -#ifdef CONFIG_CMC_PU2 - load_sernum_ethaddr (); -#endif /* CONFIG_CMC_PU2 */ + stdio_init (); /* get the devices list going. */ jumptable_init (); @@ -422,6 +400,10 @@ void start_armboot (void) console_init_r (); /* fully init console as a device */ +#if defined(CONFIG_ARCH_MISC_INIT) + /* miscellaneous arch dependent initialisations */ + arch_misc_init (); +#endif #if defined(CONFIG_MISC_INIT_R) /* miscellaneous platform dependent initialisations */ misc_init_r (); @@ -432,19 +414,26 @@ void start_armboot (void) /* Perform network card initialisation if necessary */ #ifdef CONFIG_DRIVER_TI_EMAC + /* XXX: this needs to be moved to board init */ extern void davinci_eth_set_mac_addr (const u_int8_t *addr); if (getenv ("ethaddr")) { - davinci_eth_set_mac_addr(gd->bd->bi_enetaddr); + uchar enetaddr[6]; + eth_getenv_enetaddr("ethaddr", enetaddr); + davinci_eth_set_mac_addr(enetaddr); } #endif #ifdef CONFIG_DRIVER_CS8900 - cs8900_get_enetaddr (gd->bd->bi_enetaddr); + /* XXX: this needs to be moved to board init */ + cs8900_get_enetaddr (); #endif #if defined(CONFIG_DRIVER_SMC91111) || defined (CONFIG_DRIVER_LAN91C96) + /* XXX: this needs to be moved to board init */ if (getenv ("ethaddr")) { - smc_set_mac_addr(gd->bd->bi_enetaddr); + uchar enetaddr[6]; + eth_getenv_enetaddr("ethaddr", enetaddr); + smc_set_mac_addr(enetaddr); } #endif /* CONFIG_DRIVER_SMC91111 || CONFIG_DRIVER_LAN91C96 */ @@ -461,6 +450,12 @@ extern void davinci_eth_set_mac_addr (const u_int8_t *addr); #ifdef BOARD_LATE_INIT board_late_init (); #endif + +#ifdef CONFIG_GENERIC_MMC + puts ("MMC: "); + mmc_initialize (gd->bd); +#endif + #if defined(CONFIG_CMD_NET) #if defined(CONFIG_NET_MULTI) puts ("Net: "); @@ -484,102 +479,3 @@ void hang (void) puts ("### ERROR ### Please RESET the board ###\n"); for (;;); } - -#ifdef CONFIG_MODEM_SUPPORT -static inline void mdm_readline(char *buf, int bufsiz); - -/* called from main loop (common/main.c) */ -extern void dbg(const char *fmt, ...); -int mdm_init (void) -{ - char env_str[16]; - char *init_str; - int i; - extern char console_buffer[]; - extern void enable_putc(void); - extern int hwflow_onoff(int); - - enable_putc(); /* enable serial_putc() */ - -#ifdef CONFIG_HWFLOW - init_str = getenv("mdm_flow_control"); - if (init_str && (strcmp(init_str, "rts/cts") == 0)) - hwflow_onoff (1); - else - hwflow_onoff(-1); -#endif - - for (i = 1;;i++) { - sprintf(env_str, "mdm_init%d", i); - if ((init_str = getenv(env_str)) != NULL) { - serial_puts(init_str); - serial_puts("\n"); - for(;;) { - mdm_readline(console_buffer, CONFIG_SYS_CBSIZE); - dbg("ini%d: [%s]", i, console_buffer); - - if ((strcmp(console_buffer, "OK") == 0) || - (strcmp(console_buffer, "ERROR") == 0)) { - dbg("ini%d: cmd done", i); - break; - } else /* in case we are originating call ... */ - if (strncmp(console_buffer, "CONNECT", 7) == 0) { - dbg("ini%d: connect", i); - return 0; - } - } - } else - break; /* no init string - stop modem init */ - - udelay(100000); - } - - udelay(100000); - - /* final stage - wait for connect */ - for(;i > 1;) { /* if 'i' > 1 - wait for connection - message from modem */ - mdm_readline(console_buffer, CONFIG_SYS_CBSIZE); - dbg("ini_f: [%s]", console_buffer); - if (strncmp(console_buffer, "CONNECT", 7) == 0) { - dbg("ini_f: connected"); - return 0; - } - } - - return 0; -} - -/* 'inline' - We have to do it fast */ -static inline void mdm_readline(char *buf, int bufsiz) -{ - char c; - char *p; - int n; - - n = 0; - p = buf; - for(;;) { - c = serial_getc(); - - /* dbg("(%c)", c); */ - - switch(c) { - case '\r': - break; - case '\n': - *p = '\0'; - return; - - default: - if(n++ > bufsiz) { - *p = '\0'; - return; /* sanity check */ - } - *p = c; - p++; - break; - } - } -} -#endif /* CONFIG_MODEM_SUPPORT */