X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=nand_spl%2Fnand_boot.c;h=bfaabd3199c68321b05994c32feacbc0c6f6ee1c;hb=833b6435de3e8cf5b06ba81cb1b2b50e044269ff;hp=2326962b20fca42c8f432a683ae01a7b2ed3772e;hpb=4b6f394fc41d7aee40467c30807b5ea03e2f6649;p=u-boot

diff --git a/nand_spl/nand_boot.c b/nand_spl/nand_boot.c
index 2326962b20..bfaabd3199 100644
--- a/nand_spl/nand_boot.c
+++ b/nand_spl/nand_boot.c
@@ -24,6 +24,11 @@
 
 static int nand_ecc_pos[] = CONFIG_SYS_NAND_ECCPOS;
 
+#define ECCSTEPS	(CONFIG_SYS_NAND_PAGE_SIZE / \
+					CONFIG_SYS_NAND_ECCSIZE)
+#define ECCTOTAL	(ECCSTEPS * CONFIG_SYS_NAND_ECCBYTES)
+
+
 #if (CONFIG_SYS_NAND_PAGE_SIZE <= 512)
 /*
  * NAND command for small page NAND devices (512)
@@ -139,29 +144,21 @@ static int nand_is_bad_block(struct mtd_info *mtd, int block)
 static int nand_read_page(struct mtd_info *mtd, int block, int page, uchar *dst)
 {
 	struct nand_chip *this = mtd->priv;
-	u_char *ecc_calc;
-	u_char *ecc_code;
-	u_char *oob_data;
+	u_char ecc_calc[ECCTOTAL];
+	u_char ecc_code[ECCTOTAL];
+	u_char oob_data[CONFIG_SYS_NAND_OOBSIZE];
 	int i;
 	int eccsize = CONFIG_SYS_NAND_ECCSIZE;
 	int eccbytes = CONFIG_SYS_NAND_ECCBYTES;
-	int eccsteps = CONFIG_SYS_NAND_ECCSTEPS;
+	int eccsteps = ECCSTEPS;
 	uint8_t *p = dst;
 
-	/*
-	 * No malloc available for now, just use some temporary locations
-	 * in SDRAM
-	 */
-	ecc_calc = (u_char *)(CONFIG_SYS_SDRAM_BASE + 0x10000);
-	ecc_code = ecc_calc + 0x100;
-	oob_data = ecc_calc + 0x200;
-
 	nand_command(mtd, block, page, 0, NAND_CMD_READOOB);
 	this->read_buf(mtd, oob_data, CONFIG_SYS_NAND_OOBSIZE);
 	nand_command(mtd, block, page, 0, NAND_CMD_READ0);
 
 	/* Pick the ECC bytes out of the oob data */
-	for (i = 0; i < CONFIG_SYS_NAND_ECCTOTAL; i++)
+	for (i = 0; i < ECCTOTAL; i++)
 		ecc_code[i] = oob_data[nand_ecc_pos[i]];
 
 
@@ -178,24 +175,17 @@ static int nand_read_page(struct mtd_info *mtd, int block, int page, uchar *dst)
 static int nand_read_page(struct mtd_info *mtd, int block, int page, uchar *dst)
 {
 	struct nand_chip *this = mtd->priv;
-	u_char *ecc_calc;
-	u_char *ecc_code;
-	u_char *oob_data;
+	u_char ecc_calc[ECCTOTAL];
+	u_char ecc_code[ECCTOTAL];
+	u_char oob_data[CONFIG_SYS_NAND_OOBSIZE];
 	int i;
 	int eccsize = CONFIG_SYS_NAND_ECCSIZE;
 	int eccbytes = CONFIG_SYS_NAND_ECCBYTES;
-	int eccsteps = CONFIG_SYS_NAND_ECCSTEPS;
+	int eccsteps = ECCSTEPS;
 	uint8_t *p = dst;
 
 	nand_command(mtd, block, page, 0, NAND_CMD_READ0);
 
-	/* No malloc available for now, just use some temporary locations
-	 * in SDRAM
-	 */
-	ecc_calc = (u_char *)(CONFIG_SYS_SDRAM_BASE + 0x10000);
-	ecc_code = ecc_calc + 0x100;
-	oob_data = ecc_calc + 0x200;
-
 	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
 		this->ecc.hwctl(mtd, NAND_ECC_READ);
 		this->read_buf(mtd, p, eccsize);
@@ -204,10 +194,10 @@ static int nand_read_page(struct mtd_info *mtd, int block, int page, uchar *dst)
 	this->read_buf(mtd, oob_data, CONFIG_SYS_NAND_OOBSIZE);
 
 	/* Pick the ECC bytes out of the oob data */
-	for (i = 0; i < CONFIG_SYS_NAND_ECCTOTAL; i++)
+	for (i = 0; i < ECCTOTAL; i++)
 		ecc_code[i] = oob_data[nand_ecc_pos[i]];
 
-	eccsteps = CONFIG_SYS_NAND_ECCSTEPS;
+	eccsteps = ECCSTEPS;
 	p = dst;
 
 	for (i = 0 ; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {