X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=regress%2Fprototype.conf;h=bf99f185fa2a7e3657aec0bde1b7e54afcb9da72;hb=HEAD;hp=f4f0ebe948f493aaa1ad9f146d0f4800eb99e39c;hpb=dd8888ee3dbbd2443a28b1ab1ad1b95ecaa59b01;p=bacula%2Fbacula

diff --git a/regress/prototype.conf b/regress/prototype.conf
index f4f0ebe948..bf99f185fa 100644
--- a/regress/prototype.conf
+++ b/regress/prototype.conf
@@ -1,18 +1,46 @@
+#
+# Copyright (C) 2000-2017 Kern Sibbald
+# License: BSD 2-Clause; see file LICENSE-FOSS
+#
+# Set this to the make option (usually -j3 or higher)
+MAKEOPT="-j3"
+USE_VTAPE=yes
+#USE_SHSTORE=yes
+#FORCE_ALIGNED=yes
+#FORCE_DEDUP=yes
+#FORCE_SDCALLS=yes
+
+#BAT="--enable-bat"
+BAT=
+
 # Where to get the source to be tested
-BACULA_SOURCE="${HOME}/bacula/bacula"
+BACULA_SOURCE=`pwd`/../bacula
 
 # Where to send email   !!!!! Change me !!!!!!!
 EMAIL=my-name@domain.com
+# if you don't have any SMTP, set "dummy" or empty to use dummy_bsmtp
 SMTP_HOST="localhost"
 
+# You may put your real host name here, but localhost is valid also
+#  and it has the advantage that it works on a non-newtworked machine
+HOST="127.0.0.1"
+
 # Full "default" path where to find sqlite (no quotes!)
+# if the right packages (sqlite3 & libsqlite3-dev for ubuntu) are installed
+# just use WHICHDB="--with-sqlite3" below
 SQLITE3_DIR=${HOME}/bacula/depkgs/sqlite3
-SQLITE_DIR=${HOME}/bacula/depkgs/sqlite
+
+# Set your database here
+#WHICHDB="--with-sqlite3=${SQLITE3_DIR}"
+#WHICHDB="--with-postgresql"
+WHICHDB="--with-mysql" 
 
 # set to /dev/null if you do not have a tape drive
 # Note this is used for both the tape tests and the
 #   autochanger
 TAPE_DRIVE="/dev/nst0"
+# set to scsi control for shared storage 
+TAPE_CONTROL="/dev/null"
 
 # if you don't have an autochanger set AUTOCHANGER to /dev/null
 AUTOCHANGER="/dev/sg0"
@@ -31,18 +59,19 @@ SLOT2=2
 
 # For two drive tests -- set to /dev/null if you do not have it 
 TAPE_DRIVE1="/dev/null"
+# Set to second drive scsi control
+TAPE_CONTROL1="/dev/null"
+
+# Change this to use disk-changer with vtape
+AUTOCHANGER_SCRIPT=mtx-changer
 
 # This must be the path to the autochanger including its name
 AUTOCHANGER_PATH="/usr/sbin/mtx"
 
-# Set your database here
-#WHICHDB="--with-sqlite=${SQLITE_DIR}"
-#WHICHDB="--with-sqlite3=${SQLITE3_DIR}"
-#WHICHDB="--with-postgresql"
-WHICHDB="--with-mysql" 
-
-# Set this if you use libdbi framework
-#LIBDBI="dbdriver = "dbi:postgresql"; dbaddress = 127.0.0.1; dbport = 5432"
+# DB parameters
+db_name="regress"
+db_user="regress"
+db_password=""
 
 # Set this to "--with-tcp-wrappers" or "--without-tcp-wrappers"
 TCPWRAPPERS="--with-tcp-wrappers"
@@ -54,11 +83,42 @@ TCPWRAPPERS="--with-tcp-wrappers"
 # Note, you can also add any other (as many as you want) special   
 #  Bacula configuration options here, such as --disable-batch-insert
 #
-OPENSSL="--with-openssl"
+OPENSSL="--with-openssl $BAT"
 
-# You may put your real host name here, but localhost is valid also
-#  and it has the advantage that it works on a non-newtworked machine
-HOST="localhost"
+# Point RSYNC variable where your librsync 0.9.7b is installed
+# you can compile librsync with 
+# ./configure --with-pic --prefix=$HOME/dev/depkgs-rsync
+# make 
+# make install
+#
+# Then use the following RSYNC variable in your regress config file
+#RSYNC=--with-rsync=$HOME/dev/depkgs-rsync
+RSYNC=
+
+# Point TOKYOCABINET variable where your tokyocabinet is installed
+# you can compile tokyocabinet with 
+# ./configure --with-pic --prefix=$HOME/dev/depkgs-tokyocabinet
+# make 
+# make install
+#
+# Then use the following TOKYOCABINET variable in your regress config file
+# don't forget to update LD_LIBRARY_PATH or /etc/ld.so.conf,
+#TOKYOCABINET=--with-tokyocabinet=$HOME/dev/depkgs-tokyocabinet
+TOKYOCABINET=
+
+# DEDUP allows to disable deduplication on the SD
+# If you don't have TokyoCabinet
+#DEDUP=--disable-sd-dedup
+DEDUP=
+
+# Use DEDUP device
+#FORCE_DEDUP=yes|no
+
+# Configure FileSet { Include { Options { Dedup = }}}
+#DEDUP_FS_OPTION=bothsides|storage|none
+
+# Use a client side cache
+#DEDUP_FD_CACHE=yes|no
 
 # see --with-base-port at
 # http://www.bacula.org/rel-manual/Installing_Bacula.html
@@ -75,4 +135,66 @@ BASEPORT=8101
 # We recommend that you prefix it by your name, and if you have multiple
 #  test machines, add some indication of the machine.
 #
-SITE_NAME=<your-name>-bacula-${HOST}
+SITE_NAME=bacula-${HOST}
+
+# If you want to use the full source tree to run test uncomment this
+# KEEP_SOURCE=yes
+
+#
+# The following are used only if you want to run Win32 tests, which
+#   is a real pain since the Win32 machine is not localhost and you
+#   also need to specify what to backup.
+# There are a few Win32 tests e.g. tests/win32-test where this will
+#   work. You must specify the client name, its address, and a 
+#   file (which may be a directory) on the machine to backup.
+#   It will be backed up and restored to c:/tmp, but no checking
+#   of the resulting restore data is done.
+#
+# Client name. Note, it must be configured to accept your regress director
+WIN32_CLIENT="yyyy"
+# Client FQDN or IP address
+WIN32_ADDR="yyyy"
+# File or Directory to backup.  This is put in the "File" directive 
+#   in the FileSet
+WIN32_FILE="c:/users/xxxx"
+# Port of Win32 client
+WIN32_PORT=9102
+# Win32 Client password
+WIN32_PASSWORD="zzzzz"
+# Where the win32 client will have to contact the SD
+WIN32_STORE_ADDR="zzzz"
+# To setup autologon and regress-win32.pl start
+# User name
+WIN32_USER=Administrator
+# Admin password
+WIN32_PASS=PasswordWin
+
+#
+# Testing remote SD
+#
+# IP address of remote SD
+REMOTE_HOST_ADDR=
+
+# Name of this Director which will be validated remotely
+#   If we are the Director, you must put xxxx below.  
+#   Only on the remote director do you put the name
+#     of this director in the HOST environment variable
+REMOTE_DIR_NAME="xxxxx"
+
+#
+# Testing remote FD
+#
+
+# Client name. Note, it must be configured to accept your regress director
+REMOTE_CLIENT="yyyy"
+# Client FQDN or IP address
+REMOTE_ADDR="yyyy"
+# File or Directory to backup.  This is put in the "File" directive 
+#   in the FileSet
+REMOTE_FILE="/tmp"
+# Port of Win32 client
+REMOTE_PORT=8102
+# Win32 Client password
+REMOTE_PASSWORD="zzzzz"
+# Where the win32 client will have to contact the SD
+REMOTE_STORE_ADDR="zzzz"