X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=scripts%2FMakefile.spl;h=44242842db31f0af7ffe85fad3ede79356395354;hb=6a12cebd90a752b0214a65b152703ca63a941478;hp=6b32618a61a79e88aece0f9ed1b5de622701d87c;hpb=5917112c9e9f7a60062c604b3224bd5713c41f46;p=u-boot

diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl
index 6b32618a61..44242842db 100644
--- a/scripts/Makefile.spl
+++ b/scripts/Makefile.spl
@@ -52,37 +52,15 @@ libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
 libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
 
 libs-$(CONFIG_SPL_FRAMEWORK) += common/spl/
-libs-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/
+libs-y += common/init/
+libs-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/ cmd/
 libs-$(CONFIG_SPL_LIBDISK_SUPPORT) += disk/
-libs-$(CONFIG_SPL_DM) += drivers/core/
-libs-$(CONFIG_SPL_I2C_SUPPORT) += drivers/i2c/
-libs-$(CONFIG_SPL_GPIO_SUPPORT) += drivers/gpio/
-libs-$(CONFIG_SPL_MMC_SUPPORT) += drivers/mmc/
-libs-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += drivers/ddr/fsl/
-libs-$(CONFIG_SYS_MVEBU_DDR) += drivers/ddr/mvebu/
-libs-$(CONFIG_SPL_SERIAL_SUPPORT) += drivers/serial/
-libs-$(CONFIG_SPL_SPI_FLASH_SUPPORT) += drivers/mtd/spi/
-libs-$(CONFIG_SPL_SPI_SUPPORT) += drivers/spi/
+libs-y += drivers/
+libs-y += dts/
 libs-y += fs/
-libs-$(CONFIG_SPL_LED_SUPPORT) += drivers/led/
 libs-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/
-libs-$(CONFIG_SPL_POWER_SUPPORT) += drivers/power/ drivers/power/pmic/
-libs-$(CONFIG_SPL_MTD_SUPPORT) += drivers/mtd/
-libs-$(CONFIG_SPL_NAND_SUPPORT) += drivers/mtd/nand/
-libs-$(CONFIG_SPL_DRIVERS_MISC_SUPPORT) += drivers/misc/
-libs-$(CONFIG_SPL_ONENAND_SUPPORT) += drivers/mtd/onenand/
-libs-$(CONFIG_SPL_DMA_SUPPORT) += drivers/dma/
 libs-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/
 libs-$(CONFIG_SPL_NET_SUPPORT) += net/
-libs-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/
-libs-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/phy/
-libs-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/net/phy/
-libs-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += drivers/usb/musb-new/
-libs-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/usb/gadget/
-libs-$(CONFIG_SPL_WATCHDOG_SUPPORT) += drivers/watchdog/
-libs-$(CONFIG_SPL_USB_HOST_SUPPORT) += drivers/usb/host/
-libs-$(CONFIG_OMAP_USB_PHY) += drivers/usb/phy/
-libs-$(CONFIG_SPL_SATA_SUPPORT) += drivers/block/
 
 head-y		:= $(addprefix $(obj)/,$(head-y))
 libs-y		:= $(addprefix $(obj)/,$(libs-y))
@@ -136,9 +114,10 @@ MKIMAGEFLAGS_MLO = -T omapimage -a $(CONFIG_SPL_TEXT_BASE)
 
 MKIMAGEFLAGS_MLO.byteswap = -T omapimage -n byteswap -a $(CONFIG_SPL_TEXT_BASE)
 
-MLO MLO.byteswap: $(obj)/u-boot-spl.bin
+MLO MLO.byteswap: $(obj)/u-boot-spl.bin FORCE
 	$(call if_changed,mkimage)
 
+ifeq ($(CONFIG_SYS_SOC),"at91")
 MKIMAGEFLAGS_boot.bin = -T atmelimage
 
 ifeq ($(CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER),y)
@@ -147,17 +126,25 @@ MKIMAGEFLAGS_boot.bin += -n $(shell $(obj)/../tools/atmel_pmecc_params)
 boot.bin: $(obj)/../tools/atmel_pmecc_params
 endif
 
-boot.bin: $(obj)/u-boot-spl.bin
+boot.bin: $(obj)/u-boot-spl.bin FORCE
 	$(call if_changed,mkimage)
+else
+MKIMAGEFLAGS_boot.bin = -T zynqimage
 
-ALL-y	+= $(obj)/$(SPL_BIN).bin $(obj)/$(SPL_BIN).cfg
+spl/boot.bin: $(obj)/u-boot-spl.bin FORCE
+	$(call if_changed,mkimage)
+endif
 
-ALL-$(CONFIG_OF_SEPARATE) += $(obj)/$(SPL_BIN)-pad.bin $(obj)/$(SPL_BIN)-dtb.bin
+ALL-y	+= $(obj)/$(SPL_BIN).bin $(obj)/$(SPL_BIN).cfg
 
 ifdef CONFIG_SAMSUNG
 ALL-y	+= $(obj)/$(BOARD)-spl.bin
 endif
 
+ifdef CONFIG_ARCH_SOCFPGA
+ALL-y	+= $(obj)/$(SPL_BIN).sfp
+endif
+
 ifdef CONFIG_SUNXI
 ALL-y	+= $(obj)/sunxi-spl.bin
 endif
@@ -166,16 +153,31 @@ ifeq ($(CONFIG_SYS_SOC),"at91")
 ALL-y	+= boot.bin
 endif
 
+ifdef CONFIG_ARCH_ZYNQ
+ALL-y	+= $(obj)/boot.bin
+endif
+
 all:	$(ALL-y)
 
 quiet_cmd_cat = CAT     $@
 cmd_cat = cat $(filter-out $(PHONY), $^) > $@
 
-$(obj)/$(SPL_BIN)-dtb.bin: $(obj)/$(SPL_BIN).bin $(obj)/$(SPL_BIN)-pad.bin \
+quiet_cmd_copy = COPY    $@
+      cmd_copy = cp $< $@
+
+ifeq ($(CONFIG_SPL_OF_CONTROL),y)
+$(obj)/$(SPL_BIN)-dtb.bin: $(obj)/$(SPL_BIN)-nodtb.bin $(obj)/$(SPL_BIN)-pad.bin \
 		$(obj)/$(SPL_BIN).dtb FORCE
 	$(call if_changed,cat)
 
-# Create a file that pads from the end of u-boot-spl.bin to bss_end
+$(obj)/$(SPL_BIN).bin: $(obj)/$(SPL_BIN)-dtb.bin FORCE
+	$(call if_changed,copy)
+else
+$(obj)/$(SPL_BIN).bin: $(obj)/$(SPL_BIN)-nodtb.bin FORCE
+	$(call if_changed,copy)
+endif
+
+# Create a file that pads from the end of u-boot-spl-nodtb.bin to bss_end
 $(obj)/$(SPL_BIN)-pad.bin: $(obj)/$(SPL_BIN)
 	@bss_size_str=$(shell $(NM) $< | awk 'BEGIN {size = 0} /__bss_size/ {size = $$1} END {print "ibase=16; " toupper(size)}' | bc); \
 	dd if=/dev/zero of=$@ bs=1 count=$${bss_size_str} 2>/dev/null;
@@ -191,14 +193,14 @@ quiet_cmd_fdtgrep = FDTGREP $@
 	$(objtree)/tools/fdtgrep -r -O dtb - -o $@ \
 		$(addprefix -P ,$(subst $\",,$(CONFIG_OF_SPL_REMOVE_PROPS)))
 
-$(obj)/$(SPL_BIN).dtb: dts/dt.dtb
-	$(call cmd,fdtgrep)
+$(obj)/$(SPL_BIN).dtb: dts/dt.dtb $(objtree)/tools/fdtgrep FORCE
+	$(call if_changed,fdtgrep)
 
 quiet_cmd_cpp_cfg = CFG     $@
 cmd_cpp_cfg = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \
 	-DDO_DEPS_ONLY -D__ASSEMBLY__ -x assembler-with-cpp -P -dM -E -o $@ $<
 
-$(obj)/$(SPL_BIN).cfg:	include/config.h
+$(obj)/$(SPL_BIN).cfg:	include/config.h FORCE
 	$(call if_changed,cpp_cfg)
 
 ifdef CONFIG_SAMSUNG
@@ -216,9 +218,9 @@ endif
 quiet_cmd_objcopy = OBJCOPY $@
 cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
 
-OBJCOPYFLAGS_$(SPL_BIN).bin = $(SPL_OBJCFLAGS) -O binary
+OBJCOPYFLAGS_$(SPL_BIN)-nodtb.bin = $(SPL_OBJCFLAGS) -O binary
 
-$(obj)/$(SPL_BIN).bin: $(obj)/$(SPL_BIN) FORCE
+$(obj)/$(SPL_BIN)-nodtb.bin: $(obj)/$(SPL_BIN) FORCE
 	$(call if_changed,objcopy)
 
 LDFLAGS_$(SPL_BIN) += -T u-boot-spl.lds $(LDFLAGS_FINAL)
@@ -226,12 +228,14 @@ ifneq ($(CONFIG_SPL_TEXT_BASE),)
 LDFLAGS_$(SPL_BIN) += -Ttext $(CONFIG_SPL_TEXT_BASE)
 endif
 
-ifdef CONFIG_SUNXI
+MKIMAGEFLAGS_$(SPL_BIN).sfp = -T socfpgaimage
+$(obj)/$(SPL_BIN).sfp: $(obj)/$(SPL_BIN).bin FORCE
+	$(call if_changed,mkimage)
+
 quiet_cmd_mksunxiboot = MKSUNXI $@
 cmd_mksunxiboot = $(objtree)/tools/mksunxiboot $< $@
-$(obj)/sunxi-spl.bin: $(obj)/$(SPL_BIN).bin
+$(obj)/sunxi-spl.bin: $(obj)/$(SPL_BIN).bin FORCE
 	$(call if_changed,mksunxiboot)
-endif
 
 quiet_cmd_u-boot-spl = LD      $@
       cmd_u-boot-spl = (cd $(obj) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) \