X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=src%2Ftarget%2Farm_opcodes.h;h=a53fee71ef1757d4d4aed10d3677ff50ba2f460c;hb=db268a3115b28c3c50c76a67d34113d619a54f89;hp=b3b51433a8d55bbc311ebdcd43328a923250432c;hpb=a4a2808c2a849eddd5d7d454c048ffdfd89ca9c6;p=openocd

diff --git a/src/target/arm_opcodes.h b/src/target/arm_opcodes.h
index b3b51433..a53fee71 100644
--- a/src/target/arm_opcodes.h
+++ b/src/target/arm_opcodes.h
@@ -2,6 +2,9 @@
  * Copyright (C) 2005 by Dominic Rath
  * Dominic.Rath@gmx.de
  *
+ * Copyright (C) 2006 by Magnus Lundin
+ * lundin@mlu.mine.nu
+ *
  * Copyright (C) 2008 by Spencer Oliver
  * spen@spen-soft.co.uk
  *
@@ -19,12 +22,16 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the
- * Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef OPENOCD_TARGET_ARM_OPCODES_H
+#define OPENOCD_TARGET_ARM_OPCODES_H
+
+/**
+ * @file
+ * Macros used to generate various ARM or Thumb opcodes.
  */
-#ifndef __ARM_OPCODES_H
-#define __ARM_OPCODES_H
 
 /* ARM mode instructions */
 
@@ -78,6 +85,12 @@
 #define ARMV4_5_MSR_IM(Im, Rotate, Field, R) \
 	(0xe320f000 | (Im)  | ((Rotate) << 8) | ((Field) << 16) | ((R) << 22))
 
+/* Load Register Word Immediate Post-Index
+ * Rd: register to load
+ * Rn: base register
+ */
+#define ARMV4_5_LDRW_IP(Rd, Rn)	(0xe4900004 | ((Rd) << 12) | ((Rn) << 16))
+
 /* Load Register Halfword Immediate Post-Index
  * Rd: register to load
  * Rn: base register
@@ -90,6 +103,12 @@
  */
 #define ARMV4_5_LDRB_IP(Rd, Rn)	(0xe4d00001 | ((Rd) << 12) | ((Rn) << 16))
 
+/* Store register Word Immediate Post-Index
+ * Rd: register to store
+ * Rn: base register
+ */
+#define ARMV4_5_STRW_IP(Rd, Rn)	(0xe4800004 | ((Rd) << 12) | ((Rn) << 16))
+
 /* Store register Halfword Immediate Post-Index
  * Rd: register to store
  * Rn: base register
@@ -113,6 +132,36 @@
  */
 #define ARMV4_5_BX(Rm) (0xe12fff10 | (Rm))
 
+/* Store data from coprocessor to consecutive memory
+ * See Armv7-A arch doc section A8.6.187
+ * P:    1=index mode (offset from Rn)
+ * U:    1=add, 0=subtract  Rn address with imm
+ * D:    Opcode D encoding
+ * W:    write back the offset start address to the Rn register
+ * CP:   Coprocessor number (4 bits)
+ * CRd:  Coprocessor source register (4 bits)
+ * Rn:   Base register for memory address (4 bits)
+ * imm:  Immediate value (0 - 1020, must be divisible by 4)
+ */
+#define ARMV4_5_STC(P, U, D, W, CP, CRd, Rn, imm) \
+	(0xec000000 | ((P) << 24) | ((U) << 23) | ((D) << 22) | \
+	((W) << 21) | ((Rn) << 16) | ((CRd) << 12) | ((CP) << 8) | ((imm)>>2))
+
+/* Loads data from consecutive memory to coprocessor
+ * See Armv7-A arch doc section A8.6.51
+ * P:    1=index mode (offset from Rn)
+ * U:    1=add, 0=subtract  Rn address with imm
+ * D:    Opcode D encoding
+ * W:    write back the offset start address to the Rn register
+ * CP:   Coprocessor number (4 bits)
+ * CRd:  Coprocessor dest register (4 bits)
+ * Rn:   Base register for memory address (4 bits)
+ * imm:  Immediate value (0 - 1020, must be divisible by 4)
+ */
+#define ARMV4_5_LDC(P, U, D, W, CP, CRd, Rn, imm) \
+	(0xec100000 | ((P) << 24) | ((U) << 23) | ((D) << 22) | \
+	((W) << 21) | ((Rn) << 16) | ((CRd) << 12) | ((CP) << 8) | ((imm) >> 2))
+
 /* Move to ARM register from coprocessor
  * CP: Coprocessor number
  * op1: Coprocessor opcode
@@ -145,9 +194,13 @@
 
 /* Thumb mode instructions
  *
- * FIXME there must be some reason all these opcodes are 32-bits
- * not 16-bits ... this should get either an explanatory comment,
- * or be changed not to duplicate the opcode.
+ * NOTE: these 16-bit opcodes fill both halves of a word with the same
+ * value.  The reason for this is that when we need to execute Thumb
+ * opcodes on ARM7/ARM9 cores (to switch to ARM state on debug entry),
+ * we must shift 32 bits to the bus using scan chain 1 ... if we write
+ * both halves, we don't need to track which half matters.  On ARMv6 and
+ * ARMv7 we don't execute Thumb instructions in debug mode; the ITR
+ * register does not accept Thumb (or Thumb2) opcodes.
  */
 
 /* Store register (Thumb mode)
@@ -257,4 +310,4 @@
 	((0xB660 | (0 << 8) | ((IF)&0x3)) \
 	| ((0xB660 | (0 << 8) | ((IF)&0x3)) << 16))
 
-#endif /* __ARM_OPCODES_H */
+#endif /* OPENOCD_TARGET_ARM_OPCODES_H */