X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=tcl%2Ftarget%2Fstr710.cfg;h=a5955b68c83d1857cd422bc7153383e8ab7fc659;hb=00635e28ba5c405742cae261d8551f165dc78ba3;hp=028c6043d1a11110b467c15e627d1e5ff0d2674e;hpb=503f6139c7ed05339daea8c4984d32840d795222;p=openocd
diff --git a/tcl/target/str710.cfg b/tcl/target/str710.cfg
index 028c6043..a5955b68 100644
--- a/tcl/target/str710.cfg
+++ b/tcl/target/str710.cfg
@@ -1,5 +1,5 @@
#start slow, speed up after reset
-jtag_khz 10
+adapter_khz 10
if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME
@@ -29,9 +29,9 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0x0f -expected-id $_C
set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi
-$_TARGETNAME configure -event reset-start { jtag_khz 10 }
+$_TARGETNAME configure -event reset-start { adapter_khz 10 }
$_TARGETNAME configure -event reset-init {
- jtag_khz 6000
+ adapter_khz 6000
# Because the hardware cannot be interrogated for the protection state
# of sectors, initialize all the sectors to be unprotected. The initial
@@ -47,9 +47,9 @@ $_TARGETNAME configure -event gdb-flash-erase-start {
$_TARGETNAME configure -work-area-phys 0x2000C000 -work-area-size 0x4000 -work-area-backup 0
#flash bank str7x 0 0
-set _FLASHNAME $_CHIPNAME.flash
+set _FLASHNAME $_CHIPNAME.flash0
flash bank $_FLASHNAME str7x 0x40000000 0x00040000 0 0 $_TARGETNAME STR71x
-set _FLASHNAME $_CHIPNAME.flash
+set _FLASHNAME $_CHIPNAME.flash1
flash bank $_FLASHNAME str7x 0x400C0000 0x00004000 0 0 $_TARGETNAME STR71x
# For more information about the configuration files, take a look at: