CPU usage had previously not supported the color option. Add support
for a "degraded" state above which the degraded color is used, and a
higher "bad" state above which the "bad" color is used. One possible
use for these might be indicating whether one or all cores are
saturated.
Unlike the color settings for other, these are set high enough to be
disabled by default. This is done because i3status determines CPU
usage over only the last display interval, which means that, a user
with a low refresh rate might see frequent, potentially-annoying color
changes.
cfg_opt_t usage_opts[] = {
CFG_STR("format", "%usage", CFGF_NONE),
cfg_opt_t usage_opts[] = {
CFG_STR("format", "%usage", CFGF_NONE),
+ CFG_FLOAT("max_threshold", 200, CFGF_NONE),
+ CFG_FLOAT("degraded_threshold", 200, CFGF_NONE),
CFG_CUSTOM_MIN_WIDTH_OPT,
CFG_CUSTOM_SEPARATOR_OPT,
CFG_CUSTOM_SEP_BLOCK_WIDTH_OPT,
CFG_CUSTOM_MIN_WIDTH_OPT,
CFG_CUSTOM_SEPARATOR_OPT,
CFG_CUSTOM_SEP_BLOCK_WIDTH_OPT,
CASE_SEC("cpu_usage") {
SEC_OPEN_MAP("cpu_usage");
CASE_SEC("cpu_usage") {
SEC_OPEN_MAP("cpu_usage");
- print_cpu_usage(json_gen, buffer, cfg_getstr(sec, "format"));
+ print_cpu_usage(json_gen, buffer, cfg_getstr(sec, "format"), cfg_getfloat(sec, "max_threshold"), cfg_getfloat(sec, "degraded_threshold"));
void print_run_watch(yajl_gen json_gen, char *buffer, const char *title, const char *pidfile, const char *format, const char *format_down);
void print_path_exists(yajl_gen json_gen, char *buffer, const char *title, const char *path, const char *format, const char *format_down);
void print_cpu_temperature_info(yajl_gen json_gen, char *buffer, int zone, const char *path, const char *format, int);
void print_run_watch(yajl_gen json_gen, char *buffer, const char *title, const char *pidfile, const char *format, const char *format_down);
void print_path_exists(yajl_gen json_gen, char *buffer, const char *title, const char *path, const char *format, const char *format_down);
void print_cpu_temperature_info(yajl_gen json_gen, char *buffer, int zone, const char *path, const char *format, int);
-void print_cpu_usage(yajl_gen json_gen, char *buffer, const char *format);
+void print_cpu_usage(yajl_gen json_gen, char *buffer, const char *format, const float max_threshold, const float degraded_threshold);
void print_eth_info(yajl_gen json_gen, char *buffer, const char *interface, const char *format_up, const char *format_down);
void print_load(yajl_gen json_gen, char *buffer, const char *format, const float max_threshold);
void print_volume(yajl_gen json_gen, char *buffer, const char *fmt, const char *fmt_muted, const char *device, const char *mixer, int mixer_idx);
void print_eth_info(yajl_gen json_gen, char *buffer, const char *interface, const char *format_up, const char *format_down);
void print_load(yajl_gen json_gen, char *buffer, const char *format, const float max_threshold);
void print_volume(yajl_gen json_gen, char *buffer, const char *fmt, const char *fmt_muted, const char *device, const char *mixer, int mixer_idx);
-Gets the percentual CPU usage from +/proc/stat+ (Linux) or +sysctl(3)+ (FreeBSD/OpenBSD).
+Gets the percentual CPU usage from +/proc/stat+ (Linux) or +sysctl(3)+
+(FreeBSD/OpenBSD).
+
+It is possible to define a max_threshold that will color the load
+value red in case the CPU average over the last interval is getting
+higher than the configured threshold. Defaults to 200 (i.e. off).
+
+It is possible to define a degraded_threshold that will color the load
+value yellow in case the CPU average over the last interval is getting
+higher than the configured threshold. Defaults to 150 (i.e. off).
*Example order*: +cpu_usage+
*Example format*: +%usage+
*Example order*: +cpu_usage+
*Example format*: +%usage+
+*Example max_threshold*: +"200,0"+
+
+*Example degraded_threshold*: +"150,0"+
+
=== Load
Gets the system load (number of processes waiting for CPU time in the last
=== Load
Gets the system load (number of processes waiting for CPU time in the last
-void print_cpu_usage(yajl_gen json_gen, char *buffer, const char *format) {
+void print_cpu_usage(yajl_gen json_gen, char *buffer, const char *format, const float max_threshold, const float degraded_threshold) {
const char *walk;
char *outwalk = buffer;
int curr_user = 0, curr_nice = 0, curr_system = 0, curr_idle = 0, curr_total;
int diff_idle, diff_total, diff_usage;
const char *walk;
char *outwalk = buffer;
int curr_user = 0, curr_nice = 0, curr_system = 0, curr_idle = 0, curr_total;
int diff_idle, diff_total, diff_usage;
+ bool colorful_output = false;
#if defined(LINUX)
static char statpath[512];
#if defined(LINUX)
static char statpath[512];
+ if (diff_usage >= max_threshold) {
+ START_COLOR("color_bad");
+ colorful_output = true;
+ } else if (diff_usage >= degraded_threshold) {
+ START_COLOR("color_degraded");
+ colorful_output = true;
+ }
+
if (BEGINS_WITH(walk + 1, "usage")) {
outwalk += sprintf(outwalk, "%02d%s", diff_usage, pct_mark);
walk += strlen("usage");
}
if (BEGINS_WITH(walk + 1, "usage")) {
outwalk += sprintf(outwalk, "%02d%s", diff_usage, pct_mark);
walk += strlen("usage");
}
+
+ if (colorful_output)
+ END_COLOR;
}
OUTPUT_FULL_TEXT(buffer);
}
OUTPUT_FULL_TEXT(buffer);