Start 1.37 stream

git-svn-id: https://bacula.svn.sourceforge.net/svnroot/bacula/trunk@1721 91ce42f0-d328-0410-95d8-f526ca767f89

diff --git a/bacula/ChangeLog b/bacula/ChangeLog
index f4d894739ea2314404c77862c98aeea2be6e8761..f2b320cca665dc58e774d912e1845dc984729a1f 100644 (file)
--- a/bacula/ChangeLog
+++ b/bacula/ChangeLog
@@ -1,5 +1,29 @@
 
-Version 1.36.1 released xxNov04:
+Version 1.36.1 released 26Nov04:
+24Nov04
+- Take Dan's fix to the fix_postgresql_tables (thanks Dan)
+- Increase Maximum Concurrent Jobs to 20 in SD and FD!
+- Fix improper handling of autochanger Volumes that are not
+  marked InChanger.
+22Nov04
+- Update authentication failure message to indicate possible
+  problem with Maximum Concurrent Jobs. Add to doc too.
+- Commit PostgreSQL BIGINT fix -- apparently some people didn't
+  get it.
+- Do not use a slot unless it is InChanger in the autochanger
+  code, otherwise autochanger gets upset not finding the Volume.
+21Nov04
+- Make authentication timeout compile time configurable.
+  The value is set in src/baconfig.h
+- Fix removing items from watchdog queue, which apparently
+  screwed up if there was more than one item.
+- Rework mediaformat part of manual to separate out old
+  tape format for easier reading.
+- Add a lot of debug code to the authentication code.
+- Add seconds to the start/end times printed in the job report.
+19Nov04
+- Fix mutex deadlock in dequeue of messages.
+- Add debug code to FD authorization.
 18Nov04
 - Increase authentication timeouts to 10 minutes.  
 15Nov04

diff --git a/bacula/ReleaseNotes b/bacula/ReleaseNotes
index 99d6eb5005f65b0258e20ac1449ae2a302fce510..0d6e53cf67c4ed31f7c00dd09df4a1e3c8caabf6 100644 (file)
--- a/bacula/ReleaseNotes
+++ b/bacula/ReleaseNotes
@@ -1,81 +1,47 @@
 
-          Release Notes for Bacula 1.36.0
+          Release Notes for Bacula 1.36.1
 
   Bacula code: Total files = 396 Total lines = 116,418 (*.h *.c *.in)
 
 
 Major Changes:
-- Tray monitor program (really cool)
-- Bacula Rescue CDROM (easy to make and essential for emergencies)
-- Bacula CD Image Manager
-- General bug fixes/stabilization
-- French translation of manual by Ludovic Strappazon well    
-  underway.
-- UTF-8 is supported in conio.
-- Improved conf scanning code allowing FileSet components to
-  be put on a single line (previously everything had to be on
-  a different line).
-- Win32 files restored to an alternate directory will have the
-  colon following the drive letter turned into a / e.g. c: 
-  becomes c/. Previously the c: was stripped. This applies only
-  to files written to an alternate directory (i.e. using a where=).
-- Certain open files (Word for example) can now be saved on
-  Win32 systems.
-- Default for Wild-cards on Win32 systems is to fold case this       
-  should correct most of the problems users are having with
-  exclusion on Win32.
-- Lots of improvements in the Rescue scripts -- better 
-  network detection, better mounting code, ...
-- The attributes spool file can now exceed 2GB.
-- Significant speed improvements when running PostgreSQL.
-- Significantly faster restore command with very large 
-  FileSets while building the in memory directory tree.
-- Patches directory in the source will have all patches
-  that have not been applied and released (new releases are
-  only generated when really critical bugs are found).
-- Bacula forces the tape drive into variable block mode
-  on most systems (providing Bacula is running in variable
-  block mode).
-- dbcheck updated to remove many more orphaned records.
-- Support for IPv6 (untested).
-- Modifications to the license to termination clause for
-  more protection from SCO type predators. No change for
-  normal users.
-- SIGHUP to Director causes it to reload conf file.
+- There is a new Win32 pebuilder rescue disk thanks to Scott. This
+  is worth the effort to checkout.
+- A number of indexes have been removed from the PostgreSQL
+  database to improve performance during backups. You may need to
+  add these indexes if you do Verifies. See the scripts.
+- We now have a Gentoo ebuild -- thanks Scott.
+- There are a number of new ./configure options for the 
+  bimagemgr. Please see the documentation or ./configure --help
+- The RedHat autostart scripts disable using /lib/tls. If you
+  don't want this you will need to turn it off.
+- Corrected a problem with the default SD and FD conf files that
+  incorrectly set Maximum Concurrent Jobs = 1. This prevented
+  running a job and obtaining the status at the same time.
+- All daemon messages are now prefixed with a short date/time,
+  and queued messages (generated in the comm routines) have the
+  time the message was generated rather than the time the message
+  was sent (usually much later).
+- Fixed a bug with the autochanger code not respecting the InChanger
+  flag.
 
-- Many improvements in the documentation.
 
 New Directives:
-- Added "Rerun Failed levels = yes/no" in the Job resource
-  of the Director. It will upgrade the current job to a 
-  higher level (Full or Differential) if a previous job
-  of that level failed.
-- Added "Ignore FileSet Changes = yes/no" in the FileSet
-  directive of the Director. It prevents the Director from
-  immediately upgrading the job to a Full save if you modify
-  the contents of the FileSet. Not recommended. 
-- Added "Block positioning = yes/no" in Device resource in SD.
-  If set to no, Bacula should (as yet untested) be able to
-  recover data from tapes where the drive was set to fixed
-  blocksize but Bacula is in variable block size.
-- Added "Multiple connections = yes/no" in Catalog record for
-  allowing multiple simultaneous connections to the database.
-  This is a major performance improvement for PostgreSQL and
-  SQLite, but it is untested, so please test before putting
-  it into production.
-- Alert Command in SD permits checking for tape drive 
-  alerts at the end of every job (or doing anything you want).
-  An example of the command is in the default bacula-sd.conf
-  file as well as in the Storage Configuration chapter of
-  the manual.
+- None since 1.36.0
 
 New Commands:
-- umount -- same as unmount.
-- delete job now permits multiple jobids and ranges, e.g.:
-    delete job jobid=1,3,5,11-16
-- reload -- reloads bacula-dir.conf in Director.
+- None since 1.36.0
 
 Items to note!!!
+- The output from Job reports has been modified to include the 
+  seconds on the start/end times, the Storage device used, and to
+  indent the output differently.
+- If you created a PostgreSQL database under version 1.36.0, there
+  are two things you might want to do. 1. manually remove some
+  of the File table indexes to improve backup performance. See the
+  make_postgresql_tables script. 2. run fix_postgresql_tables (in
+  src/cats and updatedb) to correct a table. This is necessary only
+  if you are creating disk Volumes greater than 2GB.
 - As of 1.35.5 you MUST do a database update.
   
   cd scripts-dir (or src/cats)
@@ -86,10 +52,25 @@ Items to note!!!
 - Regular expressions are not supported in the Win32 FD.
 
 Other Items:
-- Much better error messages from system errors particularly
-  on Win32 and in running scripts.
-- Many improvements in the SD.
-- Full support for 64 bit machines.
-- btape improved test and fill commands.
-- See the ChangeLog for additional details.
+- It is now possible to build the Rescue CDROM using a pre-installed
+  static Bacula FD.
+- Corrected a bug in the traceback code when Bacula was executed without
+  a path. Tracebacks should now work in more cases.
+- Corrected a typo in the traceback script.
+- Fixed the mtx autochanger script so that it correctly waits on
+  Linux systems (if you manually enable the code).
+- Added grant all on cdimages for PostgreSQL users of bimagemgr.
+- The actual Job start time is now correctly recorded in the catalog.
+- You can now specify a JobId (or multiple ones separated by commas) on
+  the restore command line.
+- A -d50 will now turn on lots of debug code if you are having
+  authentication errors.
+- Found a workaround to a /lib/tls pthreads bug (a library seg fault).
+- Added an ALERT message class for Alert messages.
+- Fixed a seg fault in the restore tree routine when attempting
+  to select certain files in the root directory.
+- Allow other jobs to request new Volumes while operator intervention
+  is needed -- previously all stalled.
+- Enhancements to btape test (don't loop if certain tape errors occur).
+- Improvements to the Win32 install.
 

diff --git a/bacula/kernstodo b/bacula/kernstodo
index 683cd3a5fc35145bbfffaf76fd48190abb6f8c88..58ae189434f89fbf131fc388fe74eac8a87291ed 100644 (file)
--- a/bacula/kernstodo
+++ b/bacula/kernstodo
@@ -25,6 +25,10 @@ For 1.36.1:
 
 
 1.37 Possibilities:
+- Require restore via the restore command or make a restore Job
+  get the bootstrap file.
+- Use only shell tools no make in CDROM package.
+- Document PostgreSQL performance problems bug 131.
 - Document testing
 - Add performance testing hooks
 - if 2 concurrent backups are attempted on the same tape

diff --git a/bacula/src/dird/authenticate.c b/bacula/src/dird/authenticate.c
index b889e5e8b9ab50f923cde27e155bd118901b961a..4ad863a3eac2c5b89e540747427f311be4ff03c6 100644 (file)
--- a/bacula/src/dird/authenticate.c
+++ b/bacula/src/dird/authenticate.c
@@ -85,8 +85,10 @@ bool authenticate_storage_daemon(JCR *jcr, STORE *store)
       stop_bsock_timer(tid);
       Dmsg0(50, _("Director and Storage daemon passwords or names not the same.\n"));
       Jmsg0(jcr, M_FATAL, 0,
-            _("Director and Storage daemon passwords or names not the same or\n"
-            "you have exceeded the Maximum Concurrent Jobs on the SD.\n"
+            _("Unable to authenticate with Storage daemon. Possible causes:\n"
+            "Passwords or names not the same or\n"
+            "Maximum Concurrent Jobs exceeded on the SD or\n"
+            "SD networking messed up (restart daemon).\n"
             "Please see http://www.bacula.org/html-manual/faq.html#AuthorizationErrors for help.\n"));
       return 0;
    }
@@ -142,8 +144,10 @@ int authenticate_file_daemon(JCR *jcr)
       stop_bsock_timer(tid);
       Dmsg0(50, _("Director and File daemon passwords or names not the same.\n"));
       Jmsg(jcr, M_FATAL, 0,
-           _("Director and File daemon passwords or names not the same or\n"   
-            "you have exceeded the Maximum Concurrent Jobs on the FD.\n"
+            _("Unable to authenticate with File daemon. Possible causes:\n"
+            "Passwords or names not the same or\n"
+            "Maximum Concurrent Jobs exceeded on the FD or\n"
+            "FD networking messed up (restart daemon).\n"
             "Please see http://www.bacula.org/html-manual/faq.html#AuthorizationErrors for help.\n"));
       return 0;
    }

diff --git a/bacula/src/dird/query.sql b/bacula/src/dird/query.sql
index e763d9d893beb8c8765a82a5e41b0c7ea4d21241..443cf8f8676afc1d39d8e75048ee81ebe5444956 100644 (file)
--- a/bacula/src/dird/query.sql
+++ b/bacula/src/dird/query.sql
@@ -6,7 +6,7 @@ SELECT count(*) AS Jobs,sum(JobFiles) AS Files,
 SELECT max(JobId) AS Jobs,sum(JobFiles) AS Files,sum(JobBytes) As Bytes 
  FROM Job;
 # 2 
-:List where a File is saved regardless of the directory:
+:List up to 20 places where a File is saved regardless of the directory:
 *Enter Filename (no path):
 SELECT DISTINCT Job.JobId as JobId, Client.Name as Client,
   Path.Path,Filename.Name,StartTime,Level,JobFiles,JobBytes

diff --git a/bacula/src/version.h b/bacula/src/version.h
index d237d6ded0dde7e573286cc7ce2f9bd6d87e1014..9446e4364a0dcb6fa8d544c46fa455dd9ff845b4 100644 (file)
--- a/bacula/src/version.h
+++ b/bacula/src/version.h
@@ -1,8 +1,8 @@
 /* */
 #undef  VERSION
-#define VERSION "1.36.1"
-#define BDATE   "24 November 2004"
-#define LSMDATE "24Nov04"
+#define VERSION "1.37.1"
+#define BDATE   "26 November 2004"
+#define LSMDATE "26Nov04"
 
 /* Debug flags */
 #undef  DEBUG
@@ -12,7 +12,7 @@
 #define TRACE_FILE 1  
 
 /* If this is set stdout will not be closed on startup */
-/* #define DEVELOPER 1 */
+#define DEVELOPER 1