]> git.sur5r.net Git - openocd/commitdiff
Generic LPC1850 board w/ SPIFI flash.
authorGianluca Renzi <gianlucarenzi@eurekelettronica.it>
Thu, 25 Oct 2012 12:26:42 +0000 (14:26 +0200)
committerSpencer Oliver <spen@spen-soft.co.uk>
Tue, 6 Nov 2012 14:34:16 +0000 (14:34 +0000)
This config file is intended as an example of how to
use the lpcspifi flash driver, but it should be functional
for most LPC1850 boards utilizing SPIFI flash.

Change-Id: I855854282336701fd210134497ce014017f3aaec
Signed-off-by: Gianluca Renzi <gianlucarenzi@eurekelettronica.it>
Reviewed-on: http://openocd.zylin.com/929
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
tcl/board/lpc1850_spifi_generic.cfg [new file with mode: 0644]

diff --git a/tcl/board/lpc1850_spifi_generic.cfg b/tcl/board/lpc1850_spifi_generic.cfg
new file mode 100644 (file)
index 0000000..bff4af6
--- /dev/null
@@ -0,0 +1,18 @@
+#
+# Generic LPC1850 board w/ SPIFI flash.
+# This config file is intended as an example of how to
+# use the lpcspifi flash driver, but it should be functional
+# for most LPC1850 boards utilizing SPIFI flash.
+
+set CHIPNAME lpc1850
+
+source [find target/lpc1850.cfg]
+
+#A large working area greatly reduces flash write times
+set _WORKAREASIZE 0x4000
+
+$_CHIPNAME.m3 configure -work-area-phys 0x10000000 -work-area-size $_WORKAREASIZE
+
+#Configure the flash bank; 0x14000000 is the base address for
+#lpc43xx/lpc18xx family micros.
+flash bank SPIFI_FLASH lpcspifi 0x14000000 0 0 0 $_CHIPNAME.m3