#define STM32_FLASH_SR 0x40023c0C
#define STM32_FLASH_CR 0x40023c10
#define STM32_FLASH_OPTCR 0x40023c14
-#define STM32_FLASH_OBR 0x40023c1C
-
-/* option byte location */
-
-#define STM32_OB_RDP 0x1FFFF800
-#define STM32_OB_USER 0x1FFFF802
-#define STM32_OB_DATA0 0x1FFFF804
-#define STM32_OB_DATA1 0x1FFFF806
-#define STM32_OB_WRP0 0x1FFFF808
-#define STM32_OB_WRP1 0x1FFFF80A
-#define STM32_OB_WRP2 0x1FFFF80C
-#define STM32_OB_WRP3 0x1FFFF80E
+#define STM32_FLASH_OPTCR1 0x40023c18
/* FLASH_CR register bits */
#define FLASH_ERROR (FLASH_PGSERR | FLASH_PGPERR | FLASH_PGAERR | FLASH_WRPERR | FLASH_OPERR)
+/* STM32_FLASH_OPTCR register bits */
+
+#define OPT_LOCK (1 << 0)
+#define OPT_START (1 << 1)
+
/* STM32_FLASH_OBR bit definitions (reading) */
#define OPT_ERROR 0
#define KEY1 0x45670123
#define KEY2 0xCDEF89AB
+/* option register unlock key */
+#define OPTKEY1 0x08192A3B
+#define OPTKEY2 0x4C5D6E7F
+
+struct stm32x_options {
+ uint8_t RDP;
+ uint8_t user_options;
+ uint32_t protection;
+};
+
struct stm32x_flash_bank {
+ struct stm32x_options option_bytes;
int probed;
+ bool has_large_mem; /* stm32f42x/stm32f43x family */
};
/* flash bank stm32x <base> <size> 0 0 <target#>
return ERROR_OK;
}
+static int stm32x_unlock_option_reg(struct target *target)
+{
+ uint32_t ctrl;
+
+ int retval = target_read_u32(target, STM32_FLASH_OPTCR, &ctrl);
+ if (retval != ERROR_OK)
+ return retval;
+
+ if ((ctrl & OPT_LOCK) == 0)
+ return ERROR_OK;
+
+ /* unlock option registers */
+ retval = target_write_u32(target, STM32_FLASH_OPTKEYR, OPTKEY1);
+ if (retval != ERROR_OK)
+ return retval;
+
+ retval = target_write_u32(target, STM32_FLASH_OPTKEYR, OPTKEY2);
+ if (retval != ERROR_OK)
+ return retval;
+
+ retval = target_read_u32(target, STM32_FLASH_OPTCR, &ctrl);
+ if (retval != ERROR_OK)
+ return retval;
+
+ if (ctrl & OPT_LOCK) {
+ LOG_ERROR("options not unlocked STM32_FLASH_OPTCR: %x", ctrl);
+ return ERROR_TARGET_FAILURE;
+ }
+
+ return ERROR_OK;
+}
+
+static int stm32x_read_options(struct flash_bank *bank)
+{
+ uint32_t optiondata;
+ struct stm32x_flash_bank *stm32x_info = NULL;
+ struct target *target = bank->target;
+
+ stm32x_info = bank->driver_priv;
+
+ /* read current option bytes */
+ int retval = target_read_u32(target, STM32_FLASH_OPTCR, &optiondata);
+ if (retval != ERROR_OK)
+ return retval;
+
+ stm32x_info->option_bytes.user_options = optiondata & 0xec;
+ stm32x_info->option_bytes.RDP = (optiondata >> 8) & 0xff;
+ stm32x_info->option_bytes.protection = (optiondata >> 16) & 0xfff;
+
+ if (stm32x_info->has_large_mem) {
+
+ retval = target_read_u32(target, STM32_FLASH_OPTCR1, &optiondata);
+ if (retval != ERROR_OK)
+ return retval;
+
+ /* append protection bits */
+ stm32x_info->option_bytes.protection |= (optiondata >> 4) & 0x00fff000;
+ }
+
+ if (stm32x_info->option_bytes.RDP != 0xAA)
+ LOG_INFO("Device Security Bit Set");
+
+ return ERROR_OK;
+}
+
+static int stm32x_write_options(struct flash_bank *bank)
+{
+ struct stm32x_flash_bank *stm32x_info = NULL;
+ struct target *target = bank->target;
+ uint32_t optiondata;
+
+ stm32x_info = bank->driver_priv;
+
+ int retval = stm32x_unlock_option_reg(target);
+ if (retval != ERROR_OK)
+ return retval;
+
+ /* rebuild option data */
+ optiondata = stm32x_info->option_bytes.user_options;
+ buf_set_u32(&optiondata, 8, 8, stm32x_info->option_bytes.RDP);
+ buf_set_u32(&optiondata, 16, 12, stm32x_info->option_bytes.protection);
+
+ /* program options */
+ retval = target_write_u32(target, STM32_FLASH_OPTCR, optiondata);
+ if (retval != ERROR_OK)
+ return retval;
+
+ if (stm32x_info->has_large_mem) {
+
+ uint32_t optiondata2 = 0;
+ buf_set_u32(&optiondata2, 16, 12, stm32x_info->option_bytes.protection >> 12);
+ retval = target_write_u32(target, STM32_FLASH_OPTCR1, optiondata2);
+ if (retval != ERROR_OK)
+ return retval;
+ }
+
+ /* start programming cycle */
+ retval = target_write_u32(target, STM32_FLASH_OPTCR, optiondata | OPT_START);
+ if (retval != ERROR_OK)
+ return retval;
+
+ /* wait for completion */
+ retval = stm32x_wait_status_busy(bank, FLASH_ERASE_TIMEOUT);
+ if (retval != ERROR_OK)
+ return retval;
+
+ /* relock registers */
+ retval = target_write_u32(target, STM32_FLASH_OPTCR, OPT_LOCK);
+ if (retval != ERROR_OK)
+ return retval;
+
+ return ERROR_OK;
+}
+
static int stm32x_protect_check(struct flash_bank *bank)
{
return ERROR_OK;
uint32_t base_address = 0x08000000;
stm32x_info->probed = 0;
+ stm32x_info->has_large_mem = false;
/* read stm32 device id register */
int retval = stm32x_get_device_id(bank, &device_id);
break;
case 0x419:
max_flash_size_in_kb = 2048;
+ stm32x_info->has_large_mem = true;
break;
default:
LOG_WARNING("Cannot identify target as a STM32 family.");
int num_pages = (flash_size_in_kb / 128) + 4;
/* check for larger 2048 bytes devices */
- if (flash_size_in_kb > 1024)
+ if (stm32x_info->has_large_mem)
num_pages += 4;
/* check that calculation result makes sense */
/* dynamic memory */
setup_sector(bank, 4 + 1, MAX(12, num_pages) - 5, 128 * 1024);
- if (num_pages > 12) {
+ if (stm32x_info->has_large_mem) {
/* fixed memory for larger devices */
setup_sector(bank, 12, 4, 16 * 1024);
return ERROR_OK;
}
+COMMAND_HANDLER(stm32x_handle_lock_command)
+{
+ struct target *target = NULL;
+ struct stm32x_flash_bank *stm32x_info = NULL;
+
+ if (CMD_ARGC < 1)
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ struct flash_bank *bank;
+ int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
+ if (ERROR_OK != retval)
+ return retval;
+
+ stm32x_info = bank->driver_priv;
+ target = bank->target;
+
+ if (target->state != TARGET_HALTED) {
+ LOG_ERROR("Target not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ if (stm32x_read_options(bank) != ERROR_OK) {
+ command_print(CMD_CTX, "%s failed to read options", bank->driver->name);
+ return ERROR_OK;
+ }
+
+ /* set readout protection */
+ stm32x_info->option_bytes.RDP = 0;
+
+ if (stm32x_write_options(bank) != ERROR_OK) {
+ command_print(CMD_CTX, "%s failed to lock device", bank->driver->name);
+ return ERROR_OK;
+ }
+
+ command_print(CMD_CTX, "%s locked", bank->driver->name);
+
+ return ERROR_OK;
+}
+
+COMMAND_HANDLER(stm32x_handle_unlock_command)
+{
+ struct target *target = NULL;
+ struct stm32x_flash_bank *stm32x_info = NULL;
+
+ if (CMD_ARGC < 1)
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ struct flash_bank *bank;
+ int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
+ if (ERROR_OK != retval)
+ return retval;
+
+ stm32x_info = bank->driver_priv;
+ target = bank->target;
+
+ if (target->state != TARGET_HALTED) {
+ LOG_ERROR("Target not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ if (stm32x_read_options(bank) != ERROR_OK) {
+ command_print(CMD_CTX, "%s failed to read options", bank->driver->name);
+ return ERROR_OK;
+ }
+
+ /* clear readout protection and complementary option bytes
+ * this will also force a device unlock if set */
+ stm32x_info->option_bytes.RDP = 0xAA;
+
+ if (stm32x_write_options(bank) != ERROR_OK) {
+ command_print(CMD_CTX, "%s failed to unlock device", bank->driver->name);
+ return ERROR_OK;
+ }
+
+ command_print(CMD_CTX, "%s unlocked.\n"
+ "INFO: a reset or power cycle is required "
+ "for the new settings to take effect.", bank->driver->name);
+
+ return ERROR_OK;
+}
+
static int stm32x_mass_erase(struct flash_bank *bank)
{
int retval;
struct target *target = bank->target;
+ struct stm32x_flash_bank *stm32x_info = NULL;
if (target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
+ stm32x_info = bank->driver_priv;
+
retval = stm32x_unlock_reg(target);
if (retval != ERROR_OK)
return retval;
/* mass erase flash memory */
- if (bank->num_sectors > 12)
+ if (stm32x_info->has_large_mem)
retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_MER | FLASH_MER1);
else
retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_MER);
}
static const struct command_registration stm32x_exec_command_handlers[] = {
+ {
+ .name = "lock",
+ .handler = stm32x_handle_lock_command,
+ .mode = COMMAND_EXEC,
+ .usage = "bank_id",
+ .help = "Lock entire flash device.",
+ },
+ {
+ .name = "unlock",
+ .handler = stm32x_handle_unlock_command,
+ .mode = COMMAND_EXEC,
+ .usage = "bank_id",
+ .help = "Unlock entire protected flash device.",
+ },
{
.name = "mass_erase",
.handler = stm32x_handle_mass_erase_command,
projects / openocd / commitdiff