--- /dev/null
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>\r
+<?fileVersion 4.0.0?>\r
+\r
+<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">\r
+ <storageModule moduleId="org.eclipse.cdt.core.settings">\r
+ <cconfiguration id="cdt.managedbuild.config.gnu.mingw.exe.debug.184448914">\r
+ <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="cdt.managedbuild.config.gnu.mingw.exe.debug.184448914" moduleId="org.eclipse.cdt.core.settings" name="Debug">\r
+ <externalSettings/>\r
+ <extensions>\r
+ <extension id="org.eclipse.cdt.core.PE" point="org.eclipse.cdt.core.BinaryParser"/>\r
+ <extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>\r
+ <extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>\r
+ <extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>\r
+ </extensions>\r
+ </storageModule>\r
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">\r
+ <configuration artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildType=org.eclipse.cdt.build.core.buildType.debug,org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe" cleanCommand="rm -rf" description="" id="cdt.managedbuild.config.gnu.mingw.exe.debug.184448914" name="Debug" parent="cdt.managedbuild.config.gnu.mingw.exe.debug">\r
+ <folderInfo id="cdt.managedbuild.config.gnu.mingw.exe.debug.184448914." name="/" resourcePath="">\r
+ <toolChain id="cdt.managedbuild.toolchain.gnu.mingw.exe.debug.1251700323" name="MinGW GCC" superClass="cdt.managedbuild.toolchain.gnu.mingw.exe.debug">\r
+ <targetPlatform id="cdt.managedbuild.target.gnu.platform.mingw.exe.debug.1689770801" name="Debug Platform" superClass="cdt.managedbuild.target.gnu.platform.mingw.exe.debug"/>\r
+ <builder buildPath="${workspace_loc:/RTOSDemo/Debug}" id="cdt.managedbuild.tool.gnu.builder.mingw.base.1580550423" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="CDT Internal Builder" superClass="cdt.managedbuild.tool.gnu.builder.mingw.base"/>\r
+ <tool id="cdt.managedbuild.tool.gnu.assembler.mingw.exe.debug.740677468" name="GCC Assembler" superClass="cdt.managedbuild.tool.gnu.assembler.mingw.exe.debug">\r
+ <option id="gnu.both.asm.option.include.paths.1735905904" name="Include paths (-I)" superClass="gnu.both.asm.option.include.paths" valueType="includePath"/>\r
+ <inputType id="cdt.managedbuild.tool.gnu.assembler.input.947159880" superClass="cdt.managedbuild.tool.gnu.assembler.input"/>\r
+ </tool>\r
+ <tool id="cdt.managedbuild.tool.gnu.archiver.mingw.base.1486414422" name="GCC Archiver" superClass="cdt.managedbuild.tool.gnu.archiver.mingw.base"/>\r
+ <tool id="cdt.managedbuild.tool.gnu.cpp.compiler.mingw.exe.debug.1702673982" name="GCC C++ Compiler" superClass="cdt.managedbuild.tool.gnu.cpp.compiler.mingw.exe.debug">\r
+ <option id="gnu.cpp.compiler.mingw.exe.debug.option.optimization.level.1113935807" name="Optimization Level" superClass="gnu.cpp.compiler.mingw.exe.debug.option.optimization.level" value="gnu.cpp.compiler.optimization.level.none" valueType="enumerated"/>\r
+ <option id="gnu.cpp.compiler.mingw.exe.debug.option.debugging.level.1377100001" name="Debug Level" superClass="gnu.cpp.compiler.mingw.exe.debug.option.debugging.level" value="gnu.cpp.compiler.debugging.level.max" valueType="enumerated"/>\r
+ </tool>\r
+ <tool id="cdt.managedbuild.tool.gnu.c.compiler.mingw.exe.debug.717220069" name="GCC C Compiler" superClass="cdt.managedbuild.tool.gnu.c.compiler.mingw.exe.debug">\r
+ <option defaultValue="gnu.c.optimization.level.none" id="gnu.c.compiler.mingw.exe.debug.option.optimization.level.1441629807" name="Optimization Level" superClass="gnu.c.compiler.mingw.exe.debug.option.optimization.level" valueType="enumerated"/>\r
+ <option id="gnu.c.compiler.mingw.exe.debug.option.debugging.level.368869681" name="Debug Level" superClass="gnu.c.compiler.mingw.exe.debug.option.debugging.level" value="gnu.c.debugging.level.max" valueType="enumerated"/>\r
+ <option id="gnu.c.compiler.option.include.paths.1213993982" name="Include paths (-I)" superClass="gnu.c.compiler.option.include.paths" valueType="includePath">\r
+ <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}/FreeRTOS/include}""/>\r
+ <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}/DemoTasks/include}""/>\r
+ <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}""/>\r
+ <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}/FreeRTOS/portable/MSVC-MingW}""/>\r
+ </option>\r
+ <inputType id="cdt.managedbuild.tool.gnu.c.compiler.input.725671600" superClass="cdt.managedbuild.tool.gnu.c.compiler.input"/>\r
+ </tool>\r
+ <tool id="cdt.managedbuild.tool.gnu.c.linker.mingw.exe.debug.1731687826" name="MinGW C Linker" superClass="cdt.managedbuild.tool.gnu.c.linker.mingw.exe.debug">\r
+ <inputType id="cdt.managedbuild.tool.gnu.c.linker.input.305720568" superClass="cdt.managedbuild.tool.gnu.c.linker.input">\r
+ <additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/>\r
+ <additionalInput kind="additionalinput" paths="$(LIBS)"/>\r
+ </inputType>\r
+ </tool>\r
+ <tool id="cdt.managedbuild.tool.gnu.cpp.linker.mingw.exe.debug.1825251027" name="MinGW C++ Linker" superClass="cdt.managedbuild.tool.gnu.cpp.linker.mingw.exe.debug"/>\r
+ </toolChain>\r
+ </folderInfo>\r
+ </configuration>\r
+ </storageModule>\r
+ <storageModule moduleId="scannerConfiguration">\r
+ <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>\r
+ <profile id="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile">\r
+ <buildOutputProvider>\r
+ <openAction enabled="true" filePath=""/>\r
+ <parser enabled="true"/>\r
+ </buildOutputProvider>\r
+ <scannerInfoProvider id="specsFile">\r
+ <runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>\r
+ <parser enabled="true"/>\r
+ </scannerInfoProvider>\r
+ </profile>\r
+ <profile id="org.eclipse.cdt.make.core.GCCStandardMakePerFileProfile">\r
+ <buildOutputProvider>\r
+ <openAction enabled="true" filePath=""/>\r
+ <parser enabled="true"/>\r
+ </buildOutputProvider>\r
+ <scannerInfoProvider id="makefileGenerator">\r
+ <runAction arguments="-E -P -v -dD" command="" useDefault="true"/>\r
+ <parser enabled="true"/>\r
+ </scannerInfoProvider>\r
+ </profile>\r
+ <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfile">\r
+ <buildOutputProvider>\r
+ <openAction enabled="true" filePath=""/>\r
+ <parser enabled="true"/>\r
+ </buildOutputProvider>\r
+ <scannerInfoProvider id="specsFile">\r
+ <runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>\r
+ <parser enabled="true"/>\r
+ </scannerInfoProvider>\r
+ </profile>\r
+ <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileCPP">\r
+ <buildOutputProvider>\r
+ <openAction enabled="true" filePath=""/>\r
+ <parser enabled="true"/>\r
+ </buildOutputProvider>\r
+ <scannerInfoProvider id="specsFile">\r
+ <runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.cpp" command="g++" useDefault="true"/>\r
+ <parser enabled="true"/>\r
+ </scannerInfoProvider>\r
+ </profile>\r
+ <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC">\r
+ <buildOutputProvider>\r
+ <openAction enabled="true" filePath=""/>\r
+ <parser enabled="true"/>\r
+ </buildOutputProvider>\r
+ <scannerInfoProvider id="specsFile">\r
+ <runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.c" command="gcc" useDefault="true"/>\r
+ <parser enabled="true"/>\r
+ </scannerInfoProvider>\r
+ </profile>\r
+ <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfile">\r
+ <buildOutputProvider>\r
+ <openAction enabled="true" filePath=""/>\r
+ <parser enabled="true"/>\r
+ </buildOutputProvider>\r
+ <scannerInfoProvider id="specsFile">\r
+ <runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/${specs_file}"'" command="sh" useDefault="true"/>\r
+ <parser enabled="true"/>\r
+ </scannerInfoProvider>\r
+ </profile>\r
+ <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileCPP">\r
+ <buildOutputProvider>\r
+ <openAction enabled="true" filePath=""/>\r
+ <parser enabled="true"/>\r
+ </buildOutputProvider>\r
+ <scannerInfoProvider id="specsFile">\r
+ <runAction arguments="-c 'g++ -E -P -v -dD "${plugin_state_location}/specs.cpp"'" command="sh" useDefault="true"/>\r
+ <parser enabled="true"/>\r
+ </scannerInfoProvider>\r
+ </profile>\r
+ <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileC">\r
+ <buildOutputProvider>\r
+ <openAction enabled="true" filePath=""/>\r
+ <parser enabled="true"/>\r
+ </buildOutputProvider>\r
+ <scannerInfoProvider id="specsFile">\r
+ <runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/specs.c"'" command="sh" useDefault="true"/>\r
+ <parser enabled="true"/>\r
+ </scannerInfoProvider>\r
+ </profile>\r
+ <scannerConfigBuildInfo instanceId="cdt.managedbuild.config.gnu.mingw.exe.release.2058019519;cdt.managedbuild.config.gnu.mingw.exe.release.2058019519.;cdt.managedbuild.tool.gnu.c.compiler.mingw.exe.release.1403225577;cdt.managedbuild.tool.gnu.c.compiler.input.42137551">\r
+ <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC"/>\r
+ <profile id="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile">\r
+ <buildOutputProvider>\r
+ <openAction enabled="true" filePath=""/>\r
+ <parser enabled="true"/>\r
+ </buildOutputProvider>\r
+ <scannerInfoProvider id="specsFile">\r
+ <runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>\r
+ <parser enabled="true"/>\r
+ </scannerInfoProvider>\r
+ </profile>\r
+ <profile id="org.eclipse.cdt.make.core.GCCStandardMakePerFileProfile">\r
+ <buildOutputProvider>\r
+ <openAction enabled="true" filePath=""/>\r
+ <parser enabled="true"/>\r
+ </buildOutputProvider>\r
+ <scannerInfoProvider id="makefileGenerator">\r
+ <runAction arguments="-E -P -v -dD" command="" useDefault="true"/>\r
+ <parser enabled="true"/>\r
+ </scannerInfoProvider>\r
+ </profile>\r
+ <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfile">\r
+ <buildOutputProvider>\r
+ <openAction enabled="true" filePath=""/>\r
+ <parser enabled="true"/>\r
+ </buildOutputProvider>\r
+ <scannerInfoProvider id="specsFile">\r
+ <runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>\r
+ <parser enabled="true"/>\r
+ </scannerInfoProvider>\r
+ </profile>\r
+ <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileCPP">\r
+ <buildOutputProvider>\r
+ <openAction enabled="true" filePath=""/>\r
+ <parser enabled="true"/>\r
+ </buildOutputProvider>\r
+ <scannerInfoProvider id="specsFile">\r
+ <runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.cpp" command="g++" useDefault="true"/>\r
+ <parser enabled="true"/>\r
+ </scannerInfoProvider>\r
+ </profile>\r
+ <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC">\r
+ <buildOutputProvider>\r
+ <openAction enabled="true" filePath=""/>\r
+ <parser enabled="true"/>\r
+ </buildOutputProvider>\r
+ <scannerInfoProvider id="specsFile">\r
+ <runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.c" command="gcc" useDefault="true"/>\r
+ <parser enabled="true"/>\r
+ </scannerInfoProvider>\r
+ </profile>\r
+ <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfile">\r
+ <buildOutputProvider>\r
+ <openAction enabled="true" filePath=""/>\r
+ <parser enabled="true"/>\r
+ </buildOutputProvider>\r
+ <scannerInfoProvider id="specsFile">\r
+ <runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/${specs_file}"'" command="sh" useDefault="true"/>\r
+ <parser enabled="true"/>\r
+ </scannerInfoProvider>\r
+ </profile>\r
+ <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileCPP">\r
+ <buildOutputProvider>\r
+ <openAction enabled="true" filePath=""/>\r
+ <parser enabled="true"/>\r
+ </buildOutputProvider>\r
+ <scannerInfoProvider id="specsFile">\r
+ <runAction arguments="-c 'g++ -E -P -v -dD "${plugin_state_location}/specs.cpp"'" command="sh" useDefault="true"/>\r
+ <parser enabled="true"/>\r
+ </scannerInfoProvider>\r
+ </profile>\r
+ <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileC">\r
+ <buildOutputProvider>\r
+ <openAction enabled="true" filePath=""/>\r
+ <parser enabled="true"/>\r
+ </buildOutputProvider>\r
+ <scannerInfoProvider id="specsFile">\r
+ <runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/specs.c"'" command="sh" useDefault="true"/>\r
+ <parser enabled="true"/>\r
+ </scannerInfoProvider>\r
+ </profile>\r
+ </scannerConfigBuildInfo>\r
+ <scannerConfigBuildInfo instanceId="cdt.managedbuild.config.gnu.mingw.exe.debug.184448914;cdt.managedbuild.config.gnu.mingw.exe.debug.184448914.;cdt.managedbuild.tool.gnu.c.compiler.mingw.exe.debug.717220069;cdt.managedbuild.tool.gnu.c.compiler.input.725671600">\r
+ <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC"/>\r
+ <profile id="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile">\r
+ <buildOutputProvider>\r
+ <openAction enabled="true" filePath=""/>\r
+ <parser enabled="true"/>\r
+ </buildOutputProvider>\r
+ <scannerInfoProvider id="specsFile">\r
+ <runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>\r
+ <parser enabled="true"/>\r
+ </scannerInfoProvider>\r
+ </profile>\r
+ <profile id="org.eclipse.cdt.make.core.GCCStandardMakePerFileProfile">\r
+ <buildOutputProvider>\r
+ <openAction enabled="true" filePath=""/>\r
+ <parser enabled="true"/>\r
+ </buildOutputProvider>\r
+ <scannerInfoProvider id="makefileGenerator">\r
+ <runAction arguments="-E -P -v -dD" command="" useDefault="true"/>\r
+ <parser enabled="true"/>\r
+ </scannerInfoProvider>\r
+ </profile>\r
+ <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfile">\r
+ <buildOutputProvider>\r
+ <openAction enabled="true" filePath=""/>\r
+ <parser enabled="true"/>\r
+ </buildOutputProvider>\r
+ <scannerInfoProvider id="specsFile">\r
+ <runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>\r
+ <parser enabled="true"/>\r
+ </scannerInfoProvider>\r
+ </profile>\r
+ <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileCPP">\r
+ <buildOutputProvider>\r
+ <openAction enabled="true" filePath=""/>\r
+ <parser enabled="true"/>\r
+ </buildOutputProvider>\r
+ <scannerInfoProvider id="specsFile">\r
+ <runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.cpp" command="g++" useDefault="true"/>\r
+ <parser enabled="true"/>\r
+ </scannerInfoProvider>\r
+ </profile>\r
+ <profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC">\r
+ <buildOutputProvider>\r
+ <openAction enabled="true" filePath=""/>\r
+ <parser enabled="true"/>\r
+ </buildOutputProvider>\r
+ <scannerInfoProvider id="specsFile">\r
+ <runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.c" command="gcc" useDefault="true"/>\r
+ <parser enabled="true"/>\r
+ </scannerInfoProvider>\r
+ </profile>\r
+ <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfile">\r
+ <buildOutputProvider>\r
+ <openAction enabled="true" filePath=""/>\r
+ <parser enabled="true"/>\r
+ </buildOutputProvider>\r
+ <scannerInfoProvider id="specsFile">\r
+ <runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/${specs_file}"'" command="sh" useDefault="true"/>\r
+ <parser enabled="true"/>\r
+ </scannerInfoProvider>\r
+ </profile>\r
+ <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileCPP">\r
+ <buildOutputProvider>\r
+ <openAction enabled="true" filePath=""/>\r
+ <parser enabled="true"/>\r
+ </buildOutputProvider>\r
+ <scannerInfoProvider id="specsFile">\r
+ <runAction arguments="-c 'g++ -E -P -v -dD "${plugin_state_location}/specs.cpp"'" command="sh" useDefault="true"/>\r
+ <parser enabled="true"/>\r
+ </scannerInfoProvider>\r
+ </profile>\r
+ <profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileC">\r
+ <buildOutputProvider>\r
+ <openAction enabled="true" filePath=""/>\r
+ <parser enabled="true"/>\r
+ </buildOutputProvider>\r
+ <scannerInfoProvider id="specsFile">\r
+ <runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/specs.c"'" command="sh" useDefault="true"/>\r
+ <parser enabled="true"/>\r
+ </scannerInfoProvider>\r
+ </profile>\r
+ </scannerConfigBuildInfo>\r
+ </storageModule>\r
+ <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>\r
+ <storageModule moduleId="org.eclipse.cdt.core.language.mapping"/>\r
+ </cconfiguration>\r
+ </storageModule>\r
+ <storageModule moduleId="cdtBuildSystem" version="4.0.0">\r
+ <project id="RTOSDemo.cdt.managedbuild.target.gnu.mingw.exe.1011353064" name="Executable" projectType="cdt.managedbuild.target.gnu.mingw.exe"/>\r
+ </storageModule>\r
+</cproject>\r
--- /dev/null
+<?xml version="1.0" encoding="UTF-8"?>\r
+<projectDescription>\r
+ <name>RTOSDemo</name>\r
+ <comment></comment>\r
+ <projects>\r
+ </projects>\r
+ <buildSpec>\r
+ <buildCommand>\r
+ <name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>\r
+ <triggers>clean,full,incremental,</triggers>\r
+ <arguments>\r
+ <dictionary>\r
+ <key>?name?</key>\r
+ <value></value>\r
+ </dictionary>\r
+ <dictionary>\r
+ <key>org.eclipse.cdt.make.core.append_environment</key>\r
+ <value>true</value>\r
+ </dictionary>\r
+ <dictionary>\r
+ <key>org.eclipse.cdt.make.core.buildArguments</key>\r
+ <value></value>\r
+ </dictionary>\r
+ <dictionary>\r
+ <key>org.eclipse.cdt.make.core.buildCommand</key>\r
+ <value>make</value>\r
+ </dictionary>\r
+ <dictionary>\r
+ <key>org.eclipse.cdt.make.core.buildLocation</key>\r
+ <value>${workspace_loc:/RTOSDemo/Debug}</value>\r
+ </dictionary>\r
+ <dictionary>\r
+ <key>org.eclipse.cdt.make.core.contents</key>\r
+ <value>org.eclipse.cdt.make.core.activeConfigSettings</value>\r
+ </dictionary>\r
+ <dictionary>\r
+ <key>org.eclipse.cdt.make.core.enableAutoBuild</key>\r
+ <value>false</value>\r
+ </dictionary>\r
+ <dictionary>\r
+ <key>org.eclipse.cdt.make.core.enableCleanBuild</key>\r
+ <value>true</value>\r
+ </dictionary>\r
+ <dictionary>\r
+ <key>org.eclipse.cdt.make.core.enableFullBuild</key>\r
+ <value>true</value>\r
+ </dictionary>\r
+ <dictionary>\r
+ <key>org.eclipse.cdt.make.core.stopOnError</key>\r
+ <value>true</value>\r
+ </dictionary>\r
+ <dictionary>\r
+ <key>org.eclipse.cdt.make.core.useDefaultBuildCmd</key>\r
+ <value>true</value>\r
+ </dictionary>\r
+ </arguments>\r
+ </buildCommand>\r
+ <buildCommand>\r
+ <name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>\r
+ <triggers>full,incremental,</triggers>\r
+ <arguments>\r
+ </arguments>\r
+ </buildCommand>\r
+ </buildSpec>\r
+ <natures>\r
+ <nature>org.eclipse.cdt.core.cnature</nature>\r
+ <nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>\r
+ <nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>\r
+ </natures>\r
+</projectDescription>\r
--- /dev/null
+#Sun Nov 21 18:36:02 GMT 2010\r
+eclipse.preferences.version=1\r
+environment/buildEnvironmentInclude/cdt.managedbuild.config.gnu.mingw.exe.debug.184448914/CPATH/delimiter=;\r
+environment/buildEnvironmentInclude/cdt.managedbuild.config.gnu.mingw.exe.debug.184448914/CPATH/operation=remove\r
+environment/buildEnvironmentInclude/cdt.managedbuild.config.gnu.mingw.exe.debug.184448914/C_INCLUDE_PATH/delimiter=;\r
+environment/buildEnvironmentInclude/cdt.managedbuild.config.gnu.mingw.exe.debug.184448914/C_INCLUDE_PATH/operation=remove\r
+environment/buildEnvironmentInclude/cdt.managedbuild.config.gnu.mingw.exe.debug.184448914/append=true\r
+environment/buildEnvironmentInclude/cdt.managedbuild.config.gnu.mingw.exe.debug.184448914/appendContributed=true\r
+environment/buildEnvironmentLibrary/cdt.managedbuild.config.gnu.mingw.exe.debug.184448914/LIBRARY_PATH/delimiter=;\r
+environment/buildEnvironmentLibrary/cdt.managedbuild.config.gnu.mingw.exe.debug.184448914/LIBRARY_PATH/operation=remove\r
+environment/buildEnvironmentLibrary/cdt.managedbuild.config.gnu.mingw.exe.debug.184448914/append=true\r
+environment/buildEnvironmentLibrary/cdt.managedbuild.config.gnu.mingw.exe.debug.184448914/appendContributed=true\r
--- /dev/null
+REM This file should be executed from the command line prior to the first\r
+REM build. It will be necessary to refresh the Eclipse project once the\r
+REM .bat file has been executed (normally just press F5 to refresh).\r
+\r
+REM Copies all the required files from their location within the standard\r
+REM FreeRTOS directory structure to under the Eclipse project directory.\r
+REM This permits the Eclipse project to be used in 'managed' mode and without\r
+REM having to setup any linked resources.\r
+\r
+REM Have the files already been copied?\r
+IF EXIST FreeRTOS Goto END\r
+\r
+ REM Create the required directory structure.\r
+ MD FreeRTOS\r
+ MD FreeRTOS\include\r
+ MD FreeRTOS\portable\r
+ MD FreeRTOS\portable\MSVC-MingW\r
+ MD FreeRTOS\portable\MemMang\r
+ MD DemoTasks\r
+ MD DemoTasks\include\r
+ \r
+ REM Copy the core kernel files.\r
+ copy ..\..\Source\tasks.c FreeRTOS\r
+ copy ..\..\Source\queue.c FreeRTOS\r
+ copy ..\..\Source\list.c FreeRTOS\r
+ \r
+ REM Copy the common header files\r
+\r
+ copy ..\..\Source\include\*.* FreeRTOS\include\r
+ \r
+ REM Copy the portable layer files\r
+ copy ..\..\Source\portable\MSVC-MingW\*.* FreeRTOS\portable\MSVC-MingW\r
+ \r
+ REM Copy the basic memory allocation files\r
+ copy ..\..\Source\portable\MemMang\heap_3.c FreeRTOS\portable\MemMang\r
+\r
+ REM Copy the common demo files that are used by this demo\r
+ copy ..\Common\include\BlockQ.h DemoTasks\include\r
+ copy ..\Common\include\integer.h DemoTasks\include\r
+ copy ..\Common\include\semtest.h DemoTasks\include\r
+ copy ..\Common\include\PollQ.h DemoTasks\include\r
+ copy ..\Common\include\GenQTest.h DemoTasks\include\r
+ copy ..\Common\include\QPeek.h DemoTasks\include\r
+ copy ..\Common\include\flop.h DemoTasks\include\r
+ copy ..\Common\include\recmutex.h DemoTasks\include\r
+ copy ..\Common\Minimal\BlockQ.c DemoTasks\r
+ copy ..\Common\Minimal\integer.c DemoTasks\r
+ copy ..\Common\Minimal\semtest.c DemoTasks\r
+ copy ..\Common\Minimal\PollQ.c DemoTasks\r
+ copy ..\Common\Minimal\GenQTest.c DemoTasks\r
+ copy ..\Common\Minimal\QPeek.c DemoTasks\r
+ copy ..\Common\Minimal\flop.c DemoTasks\r
+ \r
+: END
\ No newline at end of file
--- /dev/null
+/*\r
+ FreeRTOS V6.1.0 - Copyright (C) 2010 Real Time Engineers Ltd.\r
+\r
+ ***************************************************************************\r
+ * *\r
+ * If you are: *\r
+ * *\r
+ * + New to FreeRTOS, *\r
+ * + Wanting to learn FreeRTOS or multitasking in general quickly *\r
+ * + Looking for basic training, *\r
+ * + Wanting to improve your FreeRTOS skills and productivity *\r
+ * *\r
+ * then take a look at the FreeRTOS books - available as PDF or paperback *\r
+ * *\r
+ * "Using the FreeRTOS Real Time Kernel - a Practical Guide" *\r
+ * http://www.FreeRTOS.org/Documentation *\r
+ * *\r
+ * A pdf reference manual is also available. Both are usually delivered *\r
+ * to your inbox within 20 minutes to two hours when purchased between 8am *\r
+ * and 8pm GMT (although please allow up to 24 hours in case of *\r
+ * exceptional circumstances). Thank you for your support! *\r
+ * *\r
+ ***************************************************************************\r
+\r
+ This file is part of the FreeRTOS distribution.\r
+\r
+ FreeRTOS is free software; you can redistribute it and/or modify it under\r
+ the terms of the GNU General Public License (version 2) as published by the\r
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.\r
+ ***NOTE*** The exception to the GPL is included to allow you to distribute\r
+ a combined work that includes FreeRTOS without being obliged to provide the\r
+ source code for proprietary components outside of the FreeRTOS kernel.\r
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT\r
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or\r
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for\r
+ more details. You should have received a copy of the GNU General Public \r
+ License and the FreeRTOS license exception along with FreeRTOS; if not it \r
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained \r
+ by writing to Richard Barry, contact details for whom are available on the\r
+ FreeRTOS WEB site.\r
+\r
+ 1 tab == 4 spaces!\r
+\r
+ http://www.FreeRTOS.org - Documentation, latest information, license and\r
+ contact details.\r
+\r
+ http://www.SafeRTOS.com - A version that is certified for use in safety\r
+ critical systems.\r
+\r
+ http://www.OpenRTOS.com - Commercial support, development, porting,\r
+ licensing and training services.\r
+*/\r
+\r
+/*\r
+ The tasks defined on this page demonstrate the use of recursive mutexes.\r
+\r
+ For recursive mutex functionality the created mutex should be created using\r
+ xSemaphoreCreateRecursiveMutex(), then be manipulated\r
+ using the xSemaphoreTakeRecursive() and xSemaphoreGiveRecursive() API\r
+ functions.\r
+\r
+ This demo creates three tasks all of which access the same recursive mutex:\r
+\r
+ prvRecursiveMutexControllingTask() has the highest priority so executes \r
+ first and grabs the mutex. It then performs some recursive accesses - \r
+ between each of which it sleeps for a short period to let the lower \r
+ priority tasks execute. When it has completed its demo functionality\r
+ it gives the mutex back before suspending itself.\r
+\r
+ prvRecursiveMutexBlockingTask() attempts to access the mutex by performing\r
+ a blocking 'take'. The blocking task has a lower priority than the \r
+ controlling task so by the time it executes the mutex has already been\r
+ taken by the controlling task, causing the blocking task to block. It \r
+ does not unblock until the controlling task has given the mutex back, \r
+ and it does not actually run until the controlling task has suspended \r
+ itself (due to the relative priorities). When it eventually does obtain\r
+ the mutex all it does is give the mutex back prior to also suspending \r
+ itself. At this point both the controlling task and the blocking task are \r
+ suspended.\r
+\r
+ prvRecursiveMutexPollingTask() runs at the idle priority. It spins round\r
+ a tight loop attempting to obtain the mutex with a non-blocking call. As\r
+ the lowest priority task it will not successfully obtain the mutex until\r
+ both the controlling and blocking tasks are suspended. Once it eventually \r
+ does obtain the mutex it first unsuspends both the controlling task and\r
+ blocking task prior to giving the mutex back - resulting in the polling\r
+ task temporarily inheriting the controlling tasks priority.\r
+*/\r
+\r
+/* Scheduler include files. */\r
+#include "FreeRTOS.h"\r
+#include "task.h"\r
+#include "semphr.h"\r
+\r
+/* Demo app include files. */\r
+#include "recmutex.h"\r
+\r
+/* Priorities assigned to the three tasks. */\r
+#define recmuCONTROLLING_TASK_PRIORITY ( tskIDLE_PRIORITY + 2 )\r
+#define recmuBLOCKING_TASK_PRIORITY ( tskIDLE_PRIORITY + 1 )\r
+#define recmuPOLLING_TASK_PRIORITY ( tskIDLE_PRIORITY + 0 )\r
+\r
+/* In this version the tick period is very long, so the short delay cannot be\r
+for too many ticks, or the check task will execute and find that the recmutex\r
+tasks have not completed their functionality and then signal an error. The\r
+delay does however have to be long enough to allow the lower priority tasks\r
+a chance of executing - this is basically achieved by reducing the number\r
+of times the loop that takes/gives the recursive mutex executes. */\r
+#define recmuMAX_COUNT ( 2 )\r
+#define recmuSHORT_DELAY ( 20 )\r
+#define recmuNO_DELAY ( ( portTickType ) 0 )\r
+#define recmuFIVE_TICK_DELAY ( ( portTickType ) 5 )\r
+\r
+/* The three tasks as described at the top of this file. */\r
+static void prvRecursiveMutexControllingTask( void *pvParameters );\r
+static void prvRecursiveMutexBlockingTask( void *pvParameters );\r
+static void prvRecursiveMutexPollingTask( void *pvParameters );\r
+\r
+/* The mutex used by the demo. */\r
+static xSemaphoreHandle xMutex;\r
+\r
+/* Variables used to detect and latch errors. */\r
+static volatile portBASE_TYPE xErrorOccurred = pdFALSE, xControllingIsSuspended = pdFALSE, xBlockingIsSuspended = pdFALSE;\r
+static volatile unsigned portBASE_TYPE uxControllingCycles = 0, uxBlockingCycles = 0, uxPollingCycles = 0;\r
+\r
+/* Handles of the two higher priority tasks, required so they can be resumed \r
+(unsuspended). */\r
+static xTaskHandle xControllingTaskHandle, xBlockingTaskHandle;\r
+\r
+/*-----------------------------------------------------------*/\r
+\r
+void vStartRecursiveMutexTasks( void )\r
+{\r
+ /* Just creates the mutex and the three tasks. */\r
+\r
+ xMutex = xSemaphoreCreateRecursiveMutex();\r
+\r
+ /* vQueueAddToRegistry() adds the mutex to the registry, if one is\r
+ in use. The registry is provided as a means for kernel aware \r
+ debuggers to locate mutex and has no purpose if a kernel aware debugger\r
+ is not being used. The call to vQueueAddToRegistry() will be removed\r
+ by the pre-processor if configQUEUE_REGISTRY_SIZE is not defined or is \r
+ defined to be less than 1. */\r
+ vQueueAddToRegistry( ( xQueueHandle ) xMutex, ( signed portCHAR * ) "Recursive_Mutex" );\r
+\r
+\r
+ if( xMutex != NULL )\r
+ {\r
+ xTaskCreate( prvRecursiveMutexControllingTask, ( signed portCHAR * ) "Rec1Ctrl", configMINIMAL_STACK_SIZE, NULL, recmuCONTROLLING_TASK_PRIORITY, &xControllingTaskHandle );\r
+ xTaskCreate( prvRecursiveMutexBlockingTask, ( signed portCHAR * ) "Rec2Blck", configMINIMAL_STACK_SIZE, NULL, recmuBLOCKING_TASK_PRIORITY, &xBlockingTaskHandle );\r
+ xTaskCreate( prvRecursiveMutexPollingTask, ( signed portCHAR * ) "Rec3Poll", configMINIMAL_STACK_SIZE, NULL, recmuPOLLING_TASK_PRIORITY, NULL );\r
+ }\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+static void prvRecursiveMutexControllingTask( void *pvParameters )\r
+{\r
+unsigned portBASE_TYPE ux;\r
+\r
+ /* Just to remove compiler warning. */\r
+ ( void ) pvParameters;\r
+\r
+ for( ;; )\r
+ {\r
+ /* Should not be able to 'give' the mutex, as we have not yet 'taken'\r
+ it. The first time through, the mutex will not have been used yet,\r
+ subsequent times through, at this point the mutex will be held by the\r
+ polling task. */\r
+ if( xSemaphoreGiveRecursive( xMutex ) == pdPASS )\r
+ {\r
+ xErrorOccurred = pdTRUE;\r
+ }\r
+\r
+ for( ux = 0; ux < recmuMAX_COUNT; ux++ )\r
+ {\r
+ /* We should now be able to take the mutex as many times as\r
+ we like.\r
+ \r
+ The first time through the mutex will be immediately available, on\r
+ subsequent times through the mutex will be held by the polling task\r
+ at this point and this Take will cause the polling task to inherit\r
+ the priority of this task. In this case the block time must be\r
+ long enough to ensure the polling task will execute again before the\r
+ block time expires. If the block time does expire then the error\r
+ flag will be set here. */\r
+ if( xSemaphoreTakeRecursive( xMutex, recmuFIVE_TICK_DELAY ) != pdPASS )\r
+ {\r
+ xErrorOccurred = pdTRUE;\r
+ }\r
+\r
+ /* Ensure the other task attempting to access the mutex (and the\r
+ other demo tasks) are able to execute to ensure they either block\r
+ (where a block time is specified) or return an error (where no \r
+ block time is specified) as the mutex is held by this task. */\r
+ vTaskDelay( recmuSHORT_DELAY );\r
+ }\r
+\r
+ /* For each time we took the mutex, give it back. */\r
+ for( ux = 0; ux < recmuMAX_COUNT; ux++ )\r
+ {\r
+ /* Ensure the other task attempting to access the mutex (and the\r
+ other demo tasks) are able to execute. */\r
+ vTaskDelay( recmuSHORT_DELAY );\r
+\r
+ /* We should now be able to give the mutex as many times as we\r
+ took it. When the mutex is available again the Blocking task\r
+ should be unblocked but not run because it has a lower priority\r
+ than this task. The polling task should also not run at this point\r
+ as it too has a lower priority than this task. */\r
+ if( xSemaphoreGiveRecursive( xMutex ) != pdPASS )\r
+ {\r
+ xErrorOccurred = pdTRUE;\r
+ }\r
+ }\r
+\r
+ /* Having given it back the same number of times as it was taken, we\r
+ should no longer be the mutex owner, so the next give should fail. */\r
+ if( xSemaphoreGiveRecursive( xMutex ) == pdPASS )\r
+ {\r
+ xErrorOccurred = pdTRUE;\r
+ }\r
+\r
+ /* Keep count of the number of cycles this task has performed so a \r
+ stall can be detected. */\r
+ uxControllingCycles++;\r
+\r
+ /* Suspend ourselves so the blocking task can execute. */\r
+ xControllingIsSuspended = pdTRUE;\r
+ vTaskSuspend( NULL );\r
+ xControllingIsSuspended = pdFALSE;\r
+ }\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+static void prvRecursiveMutexBlockingTask( void *pvParameters )\r
+{\r
+ /* Just to remove compiler warning. */\r
+ ( void ) pvParameters;\r
+\r
+ for( ;; )\r
+ {\r
+ /* This task will run while the controlling task is blocked, and the\r
+ controlling task will block only once it has the mutex - therefore\r
+ this call should block until the controlling task has given up the \r
+ mutex, and not actually execute past this call until the controlling \r
+ task is suspended. */\r
+ if( xSemaphoreTakeRecursive( xMutex, portMAX_DELAY ) == pdPASS )\r
+ {\r
+ if( xControllingIsSuspended != pdTRUE )\r
+ {\r
+ /* Did not expect to execute until the controlling task was\r
+ suspended. */\r
+ xErrorOccurred = pdTRUE;\r
+ }\r
+ else\r
+ {\r
+ /* Give the mutex back before suspending ourselves to allow\r
+ the polling task to obtain the mutex. */\r
+ if( xSemaphoreGiveRecursive( xMutex ) != pdPASS )\r
+ {\r
+ xErrorOccurred = pdTRUE;\r
+ }\r
+\r
+ xBlockingIsSuspended = pdTRUE;\r
+ vTaskSuspend( NULL );\r
+ xBlockingIsSuspended = pdFALSE;\r
+ }\r
+ }\r
+ else\r
+ {\r
+ /* We should not leave the xSemaphoreTakeRecursive() function\r
+ until the mutex was obtained. */\r
+ xErrorOccurred = pdTRUE;\r
+ }\r
+\r
+ /* The controlling and blocking tasks should be in lock step. */\r
+ if( uxControllingCycles != ( uxBlockingCycles + 1 ) )\r
+ {\r
+ xErrorOccurred = pdTRUE;\r
+ }\r
+\r
+ /* Keep count of the number of cycles this task has performed so a \r
+ stall can be detected. */\r
+ uxBlockingCycles++;\r
+ }\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+static void prvRecursiveMutexPollingTask( void *pvParameters )\r
+{\r
+ /* Just to remove compiler warning. */\r
+ ( void ) pvParameters;\r
+\r
+ for( ;; )\r
+ {\r
+ /* Keep attempting to obtain the mutex. We should only obtain it when\r
+ the blocking task has suspended itself, which in turn should only\r
+ happen when the controlling task is also suspended. */\r
+ if( xSemaphoreTakeRecursive( xMutex, recmuNO_DELAY ) == pdPASS )\r
+ {\r
+ /* Is the blocking task suspended? */\r
+ if( ( xBlockingIsSuspended != pdTRUE ) || ( xControllingIsSuspended != pdTRUE ) )\r
+ {\r
+ xErrorOccurred = pdTRUE;\r
+ }\r
+ else\r
+ {\r
+ /* Keep count of the number of cycles this task has performed \r
+ so a stall can be detected. */\r
+ uxPollingCycles++;\r
+\r
+ /* We can resume the other tasks here even though they have a\r
+ higher priority than the polling task. When they execute they\r
+ will attempt to obtain the mutex but fail because the polling\r
+ task is still the mutex holder. The polling task (this task)\r
+ will then inherit the higher priority. The Blocking task will\r
+ block indefinitely when it attempts to obtain the mutex, the\r
+ Controlling task will only block for a fixed period and an\r
+ error will be latched if the polling task has not returned the\r
+ mutex by the time this fixed period has expired. */\r
+ vTaskResume( xBlockingTaskHandle );\r
+ vTaskResume( xControllingTaskHandle );\r
+ \r
+ /* The other two tasks should now have executed and no longer\r
+ be suspended. */\r
+ if( ( xBlockingIsSuspended == pdTRUE ) || ( xControllingIsSuspended == pdTRUE ) )\r
+ {\r
+ xErrorOccurred = pdTRUE;\r
+ } \r
+ \r
+ /* Release the mutex, disinheriting the higher priority again. */\r
+ if( xSemaphoreGiveRecursive( xMutex ) != pdPASS )\r
+ {\r
+ xErrorOccurred = pdTRUE;\r
+ }\r
+ }\r
+ }\r
+\r
+ #if configUSE_PREEMPTION == 0\r
+ {\r
+ taskYIELD();\r
+ }\r
+ #endif\r
+ }\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+/* This is called to check that all the created tasks are still running. */\r
+portBASE_TYPE xAreRecursiveMutexTasksStillRunning( void )\r
+{\r
+portBASE_TYPE xReturn;\r
+static unsigned portBASE_TYPE uxLastControllingCycles = 0, uxLastBlockingCycles = 0, uxLastPollingCycles = 0;\r
+\r
+ /* Is the controlling task still cycling? */\r
+ if( uxLastControllingCycles == uxControllingCycles )\r
+ {\r
+ xErrorOccurred = pdTRUE;\r
+ }\r
+ else\r
+ {\r
+ uxLastControllingCycles = uxControllingCycles;\r
+ }\r
+\r
+ /* Is the blocking task still cycling? */\r
+ if( uxLastBlockingCycles == uxBlockingCycles )\r
+ {\r
+ xErrorOccurred = pdTRUE;\r
+ }\r
+ else\r
+ {\r
+ uxLastBlockingCycles = uxBlockingCycles;\r
+ }\r
+\r
+ /* Is the polling task still cycling? */\r
+ if( uxLastPollingCycles == uxPollingCycles )\r
+ {\r
+ xErrorOccurred = pdTRUE;\r
+ }\r
+ else\r
+ {\r
+ uxLastPollingCycles = uxPollingCycles;\r
+ }\r
+\r
+ if( xErrorOccurred == pdTRUE )\r
+ {\r
+ xReturn = pdFAIL;\r
+ }\r
+ else\r
+ {\r
+ xReturn = pdTRUE;\r
+ }\r
+\r
+ return xReturn;\r
+}\r
+\r
+\r
+\r
+\r
--- /dev/null
+/*\r
+ FreeRTOS V6.1.0 - Copyright (C) 2010 Real Time Engineers Ltd.\r
+\r
+ ***************************************************************************\r
+ * *\r
+ * If you are: *\r
+ * *\r
+ * + New to FreeRTOS, *\r
+ * + Wanting to learn FreeRTOS or multitasking in general quickly *\r
+ * + Looking for basic training, *\r
+ * + Wanting to improve your FreeRTOS skills and productivity *\r
+ * *\r
+ * then take a look at the FreeRTOS books - available as PDF or paperback *\r
+ * *\r
+ * "Using the FreeRTOS Real Time Kernel - a Practical Guide" *\r
+ * http://www.FreeRTOS.org/Documentation *\r
+ * *\r
+ * A pdf reference manual is also available. Both are usually delivered *\r
+ * to your inbox within 20 minutes to two hours when purchased between 8am *\r
+ * and 8pm GMT (although please allow up to 24 hours in case of *\r
+ * exceptional circumstances). Thank you for your support! *\r
+ * *\r
+ ***************************************************************************\r
+\r
+ This file is part of the FreeRTOS distribution.\r
+\r
+ FreeRTOS is free software; you can redistribute it and/or modify it under\r
+ the terms of the GNU General Public License (version 2) as published by the\r
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.\r
+ ***NOTE*** The exception to the GPL is included to allow you to distribute\r
+ a combined work that includes FreeRTOS without being obliged to provide the\r
+ source code for proprietary components outside of the FreeRTOS kernel.\r
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT\r
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or\r
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for\r
+ more details. You should have received a copy of the GNU General Public \r
+ License and the FreeRTOS license exception along with FreeRTOS; if not it \r
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained \r
+ by writing to Richard Barry, contact details for whom are available on the\r
+ FreeRTOS WEB site.\r
+\r
+ 1 tab == 4 spaces!\r
+\r
+ http://www.FreeRTOS.org - Documentation, latest information, license and\r
+ contact details.\r
+\r
+ http://www.SafeRTOS.com - A version that is certified for use in safety\r
+ critical systems.\r
+\r
+ http://www.OpenRTOS.com - Commercial support, development, porting,\r
+ licensing and training services.\r
+*/\r
+\r
+\r
+#ifndef FREERTOS_CONFIG_H\r
+#define FREERTOS_CONFIG_H\r
+\r
+/*-----------------------------------------------------------\r
+ * Application specific definitions.\r
+ *\r
+ * These definitions should be adjusted for your particular hardware and\r
+ * application requirements.\r
+ *\r
+ * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE\r
+ * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.\r
+ *----------------------------------------------------------*/\r
+\r
+#define configUSE_PREEMPTION 1\r
+#define configUSE_IDLE_HOOK 1\r
+#define configUSE_TICK_HOOK 0\r
+#define configTICK_RATE_HZ ( 50 ) /* In this non-real time simulated environment the tick frequency has to be at least a multiple of the Win32 tick frequency, and therefore very slow. */\r
+#define configMINIMAL_STACK_SIZE ( ( unsigned portSHORT ) 50 ) /* In this simulated case, the stack only has to hold one small structure as the real stack is part of the win32 thread. */\r
+#define configTOTAL_HEAP_SIZE ( ( size_t ) 0 ) /* This parameter has no effect when heap_3.c is included in the project. */\r
+#define configMAX_TASK_NAME_LEN ( 12 )\r
+#define configUSE_TRACE_FACILITY 1\r
+#define configUSE_16_BIT_TICKS 0\r
+#define configIDLE_SHOULD_YIELD 1\r
+#define configUSE_CO_ROUTINES 0\r
+#define configUSE_MUTEXES 1\r
+#define configGENERATE_RUN_TIME_STATS 0\r
+#define configCHECK_FOR_STACK_OVERFLOW 0\r
+#define configUSE_RECURSIVE_MUTEXES 1\r
+#define configQUEUE_REGISTRY_SIZE 0\r
+#define configUSE_MALLOC_FAILED_HOOK 1\r
+#define configUSE_APPLICATION_TASK_TAG 0\r
+\r
+#define configMAX_PRIORITIES ( ( unsigned portBASE_TYPE ) 7 )\r
+#define configMAX_CO_ROUTINE_PRIORITIES ( 2 )\r
+\r
+\r
+/* Co-routine definitions. */\r
+#define configUSE_CO_ROUTINES 0\r
+#define configMAX_CO_ROUTINE_PRIORITIES ( 2 )\r
+\r
+/* Set the following definitions to 1 to include the API function, or zero\r
+to exclude the API function. */\r
+\r
+#define INCLUDE_vTaskPrioritySet 1\r
+#define INCLUDE_uxTaskPriorityGet 1\r
+#define INCLUDE_vTaskDelete 1\r
+#define INCLUDE_vTaskCleanUpResources 0\r
+#define INCLUDE_vTaskSuspend 1\r
+#define INCLUDE_vTaskDelayUntil 1\r
+#define INCLUDE_vTaskDelay 1\r
+#define INCLUDE_uxTaskGetStackHighWaterMark 1\r
+#define INCLUDE_xTaskGetSchedulerState 1\r
+\r
+\r
+#endif /* FREERTOS_CONFIG_H */\r
--- /dev/null
+/*\r
+ FreeRTOS V6.1.0 - Copyright (C) 2010 Real Time Engineers Ltd.\r
+\r
+ ***************************************************************************\r
+ * *\r
+ * If you are: *\r
+ * *\r
+ * + New to FreeRTOS, *\r
+ * + Wanting to learn FreeRTOS or multitasking in general quickly *\r
+ * + Looking for basic training, *\r
+ * + Wanting to improve your FreeRTOS skills and productivity *\r
+ * *\r
+ * then take a look at the FreeRTOS books - available as PDF or paperback *\r
+ * *\r
+ * "Using the FreeRTOS Real Time Kernel - a Practical Guide" *\r
+ * http://www.FreeRTOS.org/Documentation *\r
+ * *\r
+ * A pdf reference manual is also available. Both are usually delivered *\r
+ * to your inbox within 20 minutes to two hours when purchased between 8am *\r
+ * and 8pm GMT (although please allow up to 24 hours in case of *\r
+ * exceptional circumstances). Thank you for your support! *\r
+ * *\r
+ ***************************************************************************\r
+\r
+ This file is part of the FreeRTOS distribution.\r
+\r
+ FreeRTOS is free software; you can redistribute it and/or modify it under\r
+ the terms of the GNU General Public License (version 2) as published by the\r
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.\r
+ ***NOTE*** The exception to the GPL is included to allow you to distribute\r
+ a combined work that includes FreeRTOS without being obliged to provide the\r
+ source code for proprietary components outside of the FreeRTOS kernel.\r
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT\r
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or\r
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for\r
+ more details. You should have received a copy of the GNU General Public\r
+ License and the FreeRTOS license exception along with FreeRTOS; if not it\r
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained\r
+ by writing to Richard Barry, contact details for whom are available on the\r
+ FreeRTOS WEB site.\r
+\r
+ 1 tab == 4 spaces!\r
+\r
+ http://www.FreeRTOS.org - Documentation, latest information, license and\r
+ contact details.\r
+\r
+ http://www.SafeRTOS.com - A version that is certified for use in safety\r
+ critical systems.\r
+\r
+ http://www.OpenRTOS.com - Commercial support, development, porting,\r
+ licensing and training services.\r
+*/\r
+\r
+/*\r
+ *******************************************************************************\r
+ * -NOTE- The Win32 port is a simulation (or is that emulation?) only! Do not\r
+ * expect to get real time behaviour from the Win32 port or this demo\r
+ * application. It is provided as a convenient development and demonstration\r
+ * test bed only. Also, at the time of writing, a method of deleting theads \r
+ * has not been implemented, although doing so would be trivial so this\r
+ * functionality might be added in at a later date. At present, calling \r
+ * vTaskDelete() will delete the real time task from FreeRTOS but not the Win32\r
+ * thread in which the task was executing. DO NOT CALL vTaskDelete() when using \r
+ * the Win32 port! This was tested using Windows XP on a dual core laptop.\r
+ *\r
+ * - READ THE WEB DOCUMENTATION FOR THIS PORT FOR MORE INFORMATION ON USING IT -\r
+ *******************************************************************************\r
+ *\r
+ * main() creates all the demo application tasks, then starts the scheduler. \r
+ * The web documentation provides more details of the standard demo application \r
+ * tasks, which provide no particular functionality but do provide a good \r
+ * example of how to use the FreeRTOS API.\r
+ *\r
+ * In addition to the standard demo tasks, the following tasks and tests are\r
+ * defined and/or created within this file:\r
+ *\r
+ * "Check" task - This only executes every five seconds but has a high priority\r
+ * to ensure it gets processor time. Its main function is to check that all the\r
+ * standard demo tasks are still operational. While no errors have been\r
+ * discovered the check task will print out "OK" and the current simulated tick\r
+ * time. If an error is discovered in the execution of a task then the check\r
+ * task will print out an appropriate error message.\r
+ *\r
+ */\r
+\r
+\r
+/* Standard includes. */\r
+#include <stdio.h>\r
+\r
+/* Kernel includes. */\r
+#include <FreeRTOS.h>\r
+#include "task.h"\r
+#include "queue.h"\r
+\r
+/* Standard demo includes. */\r
+#include "BlockQ.h"\r
+#include "integer.h"\r
+#include "semtest.h"\r
+#include "PollQ.h"\r
+#include "GenQTest.h"\r
+#include "QPeek.h"\r
+#include "recmutex.h"\r
+#include "flop.h"\r
+\r
+/* Priorities at which the tasks are created. */\r
+#define mainCHECK_TASK_PRIORITY ( configMAX_PRIORITIES - 1 )\r
+#define mainQUEUE_POLL_PRIORITY ( tskIDLE_PRIORITY + 1 )\r
+#define mainSEM_TEST_PRIORITY ( tskIDLE_PRIORITY + 1 )\r
+#define mainBLOCK_Q_PRIORITY ( tskIDLE_PRIORITY + 2 )\r
+#define mainCREATOR_TASK_PRIORITY ( tskIDLE_PRIORITY + 3 )\r
+#define mainFLASH_TASK_PRIORITY ( tskIDLE_PRIORITY + 1 )\r
+#define mainuIP_TASK_PRIORITY ( tskIDLE_PRIORITY + 2 )\r
+#define mainINTEGER_TASK_PRIORITY ( tskIDLE_PRIORITY )\r
+#define mainGEN_QUEUE_TASK_PRIORITY ( tskIDLE_PRIORITY )\r
+#define mainFLOP_TASK_PRIORITY ( tskIDLE_PRIORITY )\r
+\r
+/* Task function prototypes. */\r
+static void prvCheckTask( void *pvParameters );\r
+\r
+/*-----------------------------------------------------------*/\r
+\r
+int main( void )\r
+{\r
+ /* Start the check task as described at the top of this file. */\r
+ xTaskCreate( prvCheckTask, ( signed char * ) "Check", configMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY, NULL );\r
+\r
+ /* Create the standard demo tasks. */\r
+ vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );\r
+ vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );\r
+ vStartPolledQueueTasks( mainQUEUE_POLL_PRIORITY );\r
+ vStartIntegerMathTasks( mainINTEGER_TASK_PRIORITY );\r
+ vStartGenericQueueTasks( mainGEN_QUEUE_TASK_PRIORITY );\r
+ vStartQueuePeekTasks();\r
+ vStartMathTasks( mainFLOP_TASK_PRIORITY );\r
+ vStartRecursiveMutexTasks();\r
+\r
+ /* Start the scheduler itself. */\r
+ vTaskStartScheduler();\r
+\r
+ /* Should never get here unless there was not enough heap space to create \r
+ the idle and other system tasks. */\r
+ return 0;\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+static void prvCheckTask( void *pvParameters )\r
+{\r
+portTickType xNextWakeTime;\r
+const portTickType xCycleFrequency = 5000 / portTICK_RATE_MS;\r
+char *pcStatusMessage = "OK";\r
+\r
+ /* Just to remove compiler warning. */\r
+ ( void ) pvParameters;\r
+\r
+ /* Initialise xNextWakeTime - this only needs to be done once. */\r
+ xNextWakeTime = xTaskGetTickCount();\r
+\r
+ for( ;; )\r
+ {\r
+ /* Place this task in the blocked state until it is time to run again. */\r
+ vTaskDelayUntil( &xNextWakeTime, xCycleFrequency );\r
+\r
+ /* Check the standard demo tasks are running without error. */\r
+ if( xAreIntegerMathsTaskStillRunning() != pdTRUE )\r
+ {\r
+ pcStatusMessage = "Error: IntMath";\r
+ } \r
+ else if( xAreGenericQueueTasksStillRunning() != pdTRUE )\r
+ { \r
+ pcStatusMessage = "Error: GenQueue";\r
+ }\r
+ else if( xAreQueuePeekTasksStillRunning() != pdTRUE )\r
+ {\r
+ pcStatusMessage = "Error: QueuePeek";\r
+ }\r
+ else if( xAreBlockingQueuesStillRunning() != pdTRUE )\r
+ {\r
+ pcStatusMessage = "Error: BlockQueue";\r
+ }\r
+ else if( xAreSemaphoreTasksStillRunning() != pdTRUE )\r
+ {\r
+ pcStatusMessage = "Error: SemTest";\r
+ }\r
+ else if( xArePollingQueuesStillRunning() != pdTRUE )\r
+ {\r
+ pcStatusMessage = "Error: PollQueue";\r
+ }\r
+ else if( xAreMathsTaskStillRunning() != pdPASS )\r
+ {\r
+ pcStatusMessage = "Error: Flop";\r
+ }\r
+ else if( xAreRecursiveMutexTasksStillRunning() != pdTRUE )\r
+ {\r
+ pcStatusMessage = "Error: RecMutex";\r
+ }\r
+\r
+ /* This is the only task that uses stdout so its ok to call printf() \r
+ directly. */\r
+ printf( "%s - %d\r\n", pcStatusMessage, ( int ) xTaskGetTickCount() );\r
+ fflush( stdout ); /* Required by Eclipse console. */\r
+ }\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+void vApplicationIdleHook( void )\r
+{\r
+ /* Sleep to reduce CPU load, but don't sleep indefinitely if not using \r
+ preemption as as nothing will cause a task switch. */\r
+ #if( configUSE_PREEMPTION != 0 )\r
+ {\r
+ SleepEx( INFINITE, TRUE );\r
+ }\r
+ #else\r
+ {\r
+ const unsigned long ulMSToSleep = 5;\r
+\r
+ SleepEx( ulMSToSleep, TRUE );\r
+ }\r
+ #endif\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+void vApplicationMallocFailedHook( void )\r
+{\r
+ /* Can be implemented if required, but probably not required in this \r
+ environment and running this demo. */\r
+}\r
+/*-----------------------------------------------------------*/\r
+\r
+void vApplicationStackOverflowHook( void )\r
+{\r
+ /* Can be implemented if required, but not required in this \r
+ environment and running this demo. */\r
+}\r
+\r
projects / freertos / commitdiff