]> git.sur5r.net Git - openocd/commitdiff
hla/stlink: Re-order trace parameters to allow trace output file to be optional
authorJames G. Smith <jsmith@ecoscentric.com>
Thu, 26 Sep 2013 11:08:05 +0000 (12:08 +0100)
committerSpencer Oliver <spen@spen-soft.co.uk>
Tue, 29 Oct 2013 22:54:34 +0000 (22:54 +0000)
Re-order the "trace" parameters to allow the raw capture (log) file to
be an optional feature. The clock frequency for calculating the "Async
Clock Prescalar" is always required when enabling trace processing and
is now the first "required" parameter.

The ST-Link driver is updated to use the (required parameter)
"trace_source_hz" non-zero value as the indicator of trace being
required, rather than the now optional output file descriptor being
non-NULL.

Background: This patch is groundwork for extending the OpenOCD SWO
capture to implement other (OpenOCD built-in) ITM/DWT processing where
the core trace support is required, but there is no requirement to
store raw trace data to a configured host file. By itself this patch
is almost a functional NOP, since without the other processing in
place there is no reason NOT to specify a capture file.

Change-Id: Ibc385dd0a7adaf9bd652bceded27262fef35fd59
Signed-off-by: James G. Smith <jsmith@ecoscentric.com>
Reviewed-on: http://openocd.zylin.com/1660
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
doc/openocd.texi
src/jtag/drivers/stlink_usb.c
src/jtag/hla/hla_interface.c

index c7776b1073344f1f35d6c5cfcd3ea279e804d5a6..aa0bb5d3773b53d7ba156426d9e18449a0243d46 100644 (file)
@@ -3045,11 +3045,11 @@ The vendor ID and product ID of the device.
 Manually sets the stlink api used, valid options are 1 or 2. (@b{STLINK Only}).
 @end deffn
 
-@deffn {Config Command} {trace} output_file_path source_clock_hz
-Enable SWO tracing (if supported), trace data is appended to the specified
-output file and the file is created if it does not exist.  The source clock
-rate for the trace port must be specified, this is typically the CPU clock
-rate.
+@deffn {Config Command} {trace} source_clock_hz [output_file_path]
+Enable SWO tracing (if supported). The source clock rate for the
+trace port must be specified, this is typically the CPU clock rate. If
+the optional output file is specified then raw trace data is appended
+to the file, and the file is created if it does not exist.
 @end deffn
 @end deffn
 
index 31f08cbb8eb2687573ad620d4817c73fbea05af4..e94e6c8a4567a5cb69f4061172de08765bb686c4 100644 (file)
@@ -855,9 +855,11 @@ static void stlink_usb_trace_read(void *handle)
 
                                res = stlink_usb_read_trace(handle, buf, size);
                                if (res == ERROR_OK) {
-                                       /* Log retrieved trace output */
-                                       if (fwrite(buf, 1, size, h->trace.output_f) > 0)
-                                               fflush(h->trace.output_f);
+                                       if (h->trace.output_f) {
+                                               /* Log retrieved trace output */
+                                               if (fwrite(buf, 1, size, h->trace.output_f) > 0)
+                                                       fflush(h->trace.output_f);
+                                       }
                                }
                        }
                }
@@ -1113,7 +1115,7 @@ static int stlink_usb_run(void *handle)
                res = stlink_usb_write_debug_reg(handle, DCB_DHCSR, DBGKEY|C_DEBUGEN);
 
                /* Try to start tracing, if requested */
-               if (res == ERROR_OK && h->trace.output_f) {
+               if (res == ERROR_OK && h->trace.source_hz) {
                        if (stlink_usb_trace_enable(handle) == ERROR_OK)
                                LOG_DEBUG("Tracing: enabled\n");
                        else
@@ -1732,7 +1734,7 @@ static int stlink_usb_open(struct hl_interface_param_s *param, void **fd)
        /* set the used jtag api, this will default to the newest supported version */
        h->jtag_api = api;
 
-       if (h->jtag_api >= 2 && param->trace_f && param->trace_source_hz > 0) {
+       if (h->jtag_api >= 2 && param->trace_source_hz > 0) {
                uint32_t prescale;
 
                prescale = param->trace_source_hz > STLINK_TRACE_MAX_HZ ?
index 02d0f2fb08b9b22730a532a772297fe55bb50e47..ae33f54e08d4aeab62ebc4ab29d737e53be7a416 100644 (file)
@@ -119,6 +119,7 @@ static int hl_interface_quit(void)
                fclose(hl_if.param.trace_f);
                hl_if.param.trace_f = NULL;
        }
+       hl_if.param.trace_source_hz = 0;
 
        return ERROR_OK;
 }
@@ -230,22 +231,23 @@ COMMAND_HANDLER(stlink_interface_handle_api_command)
 
 COMMAND_HANDLER(interface_handle_trace_command)
 {
-       FILE *f;
+       FILE *f = NULL;
        unsigned source_hz;
 
-       if (CMD_ARGC != 2)
+       if ((CMD_ARGC < 1) || (CMD_ARGC > 2))
                return ERROR_COMMAND_SYNTAX_ERROR;
 
-       f = fopen(CMD_ARGV[0], "a");
-       if (!f)
-               return ERROR_COMMAND_SYNTAX_ERROR;
-
-       COMMAND_PARSE_NUMBER(uint, CMD_ARGV[1], source_hz);
+       COMMAND_PARSE_NUMBER(uint, CMD_ARGV[0], source_hz);
        if (source_hz == 0) {
-               fclose(f);
                return ERROR_COMMAND_SYNTAX_ERROR;
        }
 
+       if (CMD_ARGC == 2) {
+               f = fopen(CMD_ARGV[0], "a");
+               if (!f)
+                       return ERROR_COMMAND_SYNTAX_ERROR;
+       }
+
        hl_if.param.trace_f = f;
        hl_if.param.trace_source_hz = source_hz;
 
@@ -293,7 +295,7 @@ static const struct command_registration hl_interface_command_handlers[] = {
         .handler = &interface_handle_trace_command,
         .mode = COMMAND_CONFIG,
         .help = "configure trace reception",
-        .usage = "destination_path source_lock_hz",
+        .usage = "source_lock_hz [destination_path]",
         },
        COMMAND_REGISTRATION_DONE
 };