FreeRTOS WEB site.\r
\r
1 tab == 4 spaces!\r
- \r
+\r
***************************************************************************\r
* *\r
* Having a problem? Start by reading the FAQ "My application does *\r
* *\r
***************************************************************************\r
\r
- \r
- http://www.FreeRTOS.org - Documentation, training, latest information, \r
+\r
+ http://www.FreeRTOS.org - Documentation, training, latest information,\r
license and contact details.\r
- \r
+\r
http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,\r
including FreeRTOS+Trace - an indispensable productivity tool.\r
\r
- Real Time Engineers ltd license FreeRTOS to High Integrity Systems, who sell \r
- the code with commercial support, indemnification, and middleware, under \r
+ Real Time Engineers ltd license FreeRTOS to High Integrity Systems, who sell\r
+ the code with commercial support, indemnification, and middleware, under\r
the OpenRTOS brand: http://www.OpenRTOS.com. High Integrity Systems also\r
- provide a safety engineered and independently SIL3 certified version under \r
+ provide a safety engineered and independently SIL3 certified version under\r
the SafeRTOS brand: http://www.SafeRTOS.com.\r
*/\r
\r
* application requirements.\r
*\r
* THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE\r
- * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. \r
+ * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.\r
*\r
* See http://www.freertos.org/a00110.html.\r
*----------------------------------------------------------*/\r
#define configUSE_RECURSIVE_MUTEXES 1\r
#define configCHECK_FOR_STACK_OVERFLOW 2\r
\r
-#define configMAX_PRIORITIES ( ( unsigned portBASE_TYPE ) 5 )\r
+#define configMAX_PRIORITIES ( 5UL )\r
#define configMAX_CO_ROUTINE_PRIORITIES ( 2 )\r
#define configQUEUE_REGISTRY_SIZE 10\r
\r
See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */\r
#define configMAX_SYSCALL_INTERRUPT_PRIORITY ( 5 << 5 ) /* Priority 5, or 160 as only the top three bits are implemented. */\r
\r
+/* Use the Cortex-M3 optimised task selection rather than the generic C code\r
+version. */\r
+#define configUSE_PORT_OPTIMISED_TASK_SELECTION 1\r
+\r
\r
#endif /* FREERTOS_CONFIG_H */\r
Target (FreeRTOS_Demo), 0x0004 // Tools: 'ARM-ADS'\r
GRPOPT 1,(Demo_Source),1,0,0\r
GRPOPT 2,(Libraries),0,0,0\r
-GRPOPT 3,(RTOS_Source),1,0,0\r
+GRPOPT 3,(RTOS_Source),0,0,0\r
GRPOPT 4,(uIP_Source),0,0,0\r
\r
OPTFFF 1,1,1,0,0,0,0,0,<..\Common\Minimal\BlockQ.c><BlockQ.c> \r
OPTFFF 1,2,1,0,0,0,0,0,<..\Common\Minimal\blocktim.c><blocktim.c> \r
OPTFFF 1,3,1,0,0,0,0,0,<..\Common\Minimal\death.c><death.c> \r
OPTFFF 1,4,1,0,0,0,0,0,<..\Common\Minimal\integer.c><integer.c> \r
-OPTFFF 1,5,1,0,0,216,228,0,<.\main.c><main.c> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,232,255,255,255,110,0,0,0,115,0,0,0,248,3,0,0,22,2,0,0 }\r
+OPTFFF 1,5,1,553648128,0,67,67,0,<.\main.c><main.c> \r
OPTFFF 1,6,1,0,0,0,0,0,<.\ParTest\ParTest.c><ParTest.c> \r
OPTFFF 1,7,1,0,0,0,0,0,<..\Common\Minimal\PollQ.c><PollQ.c> \r
OPTFFF 1,8,1,0,0,0,0,0,<..\Common\Minimal\semtest.c><semtest.c> \r
OPTFFF 1,9,2,0,0,0,0,0,<.\startup_rvmdk.S><startup_rvmdk.S> \r
OPTFFF 1,10,1,0,0,0,0,0,<.\timertest.c><timertest.c> \r
-OPTFFF 1,11,5,922746880,0,0,0,0,<.\FreeRTOSConfig.h><FreeRTOSConfig.h> \r
+OPTFFF 1,11,5,822083584,0,0,0,0,<.\FreeRTOSConfig.h><FreeRTOSConfig.h> \r
OPTFFF 1,12,1,0,0,0,0,0,<..\Common\Minimal\GenQTest.c><GenQTest.c> \r
-OPTFFF 1,13,1,0,0,0,0,0,<..\Common\Minimal\QPeek.c><QPeek.c> \r
-OPTFFF 1,14,1,721420288,0,83,83,0,<.\IntQueueTimer.c><IntQueueTimer.c> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,232,255,255,255,44,0,0,0,46,0,0,0,171,3,0,0,193,1,0,0 }\r
-OPTFFF 1,15,1,33554434,0,628,653,0,<..\Common\Minimal\IntQueue.c><IntQueue.c> { 44,0,0,0,2,0,0,0,3,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,232,255,255,255,66,0,0,0,69,0,0,0,193,3,0,0,216,1,0,0 }\r
+OPTFFF 1,13,1,1,0,0,0,0,<..\Common\Minimal\QPeek.c><QPeek.c> \r
+OPTFFF 1,14,1,0,0,0,0,0,<.\IntQueueTimer.c><IntQueueTimer.c> \r
+OPTFFF 1,15,1,0,0,0,0,0,<..\Common\Minimal\IntQueue.c><IntQueue.c> \r
OPTFFF 1,16,1,0,0,0,0,0,<..\Common\Minimal\recmutex.c><recmutex.c> \r
OPTFFF 2,17,1,0,0,0,0,0,<.\rit128x96x4.c><rit128x96x4.c> \r
OPTFFF 2,18,1,0,0,0,0,0,<.\osram128x64x4.c><osram128x64x4.c> \r
OPTFFF 3,22,1,0,0,0,0,0,<..\..\Source\tasks.c><tasks.c> \r
OPTFFF 3,23,1,0,0,0,0,0,<..\..\Source\list.c><list.c> \r
OPTFFF 3,24,1,0,0,0,0,0,<..\..\Source\queue.c><queue.c> \r
-OPTFFF 3,25,1,0,0,122,122,0,<..\..\Source\portable\RVDS\ARM_CM3\port.c><port.c> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,232,255,255,255,22,0,0,0,23,0,0,0,173,4,0,0,170,1,0,0 }\r
+OPTFFF 3,25,1,0,0,0,0,0,<..\..\Source\portable\RVDS\ARM_CM3\port.c><port.c> \r
OPTFFF 3,26,1,0,0,0,0,0,<..\..\Source\portable\MemMang\heap_2.c><heap_2.c> \r
-OPTFFF 4,27,1,822083584,0,0,0,0,<.\webserver\uIP_Task.c><uIP_Task.c> \r
+OPTFFF 4,27,1,0,0,0,0,0,<.\webserver\uIP_Task.c><uIP_Task.c> \r
OPTFFF 4,28,1,0,0,0,0,0,<.\webserver\emac.c><emac.c> \r
OPTFFF 4,29,1,0,0,0,0,0,<.\webserver\httpd.c><httpd.c> \r
OPTFFF 4,30,1,0,0,0,0,0,<.\webserver\httpd-cgi.c><httpd-cgi.c> \r
\r
TARGOPT 1, (FreeRTOS_Demo)\r
ADSCLK=8000000\r
- OPTTT 1,1,1,0\r
+ OPTTT 0,1,1,0\r
OPTHX 1,65535,0,0,0\r
OPTLX 79,66,8,<.\rvmdk\>\r
OPTOX 16\r
OPTLT 1,1,1,0,1,1,0,1,0,0,0,0\r
OPTXL 1,1,1,1,1,1,1,0,0\r
OPTFL 1,0,1\r
- OPTAX 255\r
- OPTBL 0,(Data Sheet)<DATASHTS\Luminary\LM3S8962.PDF>\r
+ OPTAX 0\r
OPTDL (SARMCM3.DLL)()(DLM.DLL)(-pLM3S8962)(SARMCM3.DLL)()(TLM.DLL)(-pLM3S8962)\r
OPTDBG 48126,4,()()()()()()()()()() (BIN\lmidk-agdi.dll)()()()\r
- OPTKEY 0,(UL2CM3)(-UU0101L5E -O14 -S0 -C0 -N00("ARM Cortex-M3") -D00(1BA00477) -L00(4) -FO7 -FD20000000 -FC800 -FN1 -FF0LM3S_256 -FS00 -FL040000)\r
- OPTKEY 0,(DLGTARM)((1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(1009=-1,-1,-1,-1,0)(110=-1,-1,-1,-1,0)(100=-1,-1,-1,-1,0)(101=-1,-1,-1,-1,0)(102=-1,-1,-1,-1,0)(103=-1,-1,-1,-1,0)(104=-1,-1,-1,-1,0)(105=-1,-1,-1,-1,0)(106=-1,-1,-1,-1,0)(161=-1,-1,-1,-1,0)(162=-1,-1,-1,-1,0)(163=-1,-1,-1,-1,0)(164=-1,-1,-1,-1,0)(150=-1,-1,-1,-1,0)(151=-1,-1,-1,-1,0)(1011=-1,-1,-1,-1,0)(1012=-1,-1,-1,-1,0)(1014=-1,-1,-1,-1,0)(1016=-1,-1,-1,-1,0)(136=-1,-1,-1,-1,0))\r
+ OPTKEY 0,(DLGTARM)((1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(1009=-1,-1,-1,-1,0)(110=-1,-1,-1,-1,0)(100=-1,-1,-1,-1,0)(101=-1,-1,-1,-1,0)(102=-1,-1,-1,-1,0)(103=-1,-1,-1,-1,0)(104=-1,-1,-1,-1,0)(105=-1,-1,-1,-1,0)(106=-1,-1,-1,-1,0)(161=-1,-1,-1,-1,0)(162=-1,-1,-1,-1,0)(163=-1,-1,-1,-1,0)(164=-1,-1,-1,-1,0)(150=-1,-1,-1,-1,0)(151=-1,-1,-1,-1,0)(1011=-1,-1,-1,-1,0)(1012=-1,-1,-1,-1,0)(1013=-1,-1,-1,-1,0)(171=-1,-1,-1,-1,0)(172=-1,-1,-1,-1,0)(173=-1,-1,-1,-1,0)(1014=-1,-1,-1,-1,0)(1016=-1,-1,-1,-1,0)(136=-1,-1,-1,-1,0))\r
OPTKEY 0,(ARMDBGFLAGS)()\r
- OPTKEY 0,(lmidk-agdi)(-B0 -O1792)\r
- OPTMM 1,2,(0)\r
- OPTDF 0x84\r
+ OPTKEY 0,(lmidk-agdi)(-U -O4622 -S3 -FO29)\r
+ OPTKEY 0,(DLGUARM)(ÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÌÈp¶\a{\ 5Ö\ 6äö\12)\r
+ OPTDF 0x80\r
OPTLE <>\r
OPTLC <>\r
EndOpt\r
<name>C-SPY</name>\r
<archiveVersion>2</archiveVersion>\r
<data>\r
- <version>22</version>\r
+ <version>23</version>\r
<wantNonLocal>1</wantNonLocal>\r
<debug>1</debug>\r
<option>\r
</option>\r
<option>\r
<name>OCLastSavedByProductVersion</name>\r
- <state>6.20.1.52589</state>\r
+ <state>6.30.7.53437</state>\r
</option>\r
<option>\r
<name>OCDownloadAttachToProgram</name>\r
<name>OCImagesUse3</name>\r
<state>0</state>\r
</option>\r
+ <option>\r
+ <name>OCDeviceConfigMacroFile</name>\r
+ <state>1</state>\r
+ </option>\r
</data>\r
</settings>\r
<settings>\r
<name>JLINK_ID</name>\r
<archiveVersion>2</archiveVersion>\r
<data>\r
- <version>13</version>\r
+ <version>14</version>\r
<wantNonLocal>1</wantNonLocal>\r
<debug>1</debug>\r
<option>\r
</option>\r
<option>\r
<name>CCJLinkResetList</name>\r
- <version>5</version>\r
+ <version>6</version>\r
<state>5</state>\r
</option>\r
<option>\r
<name>CCSwoClockEdit</name>\r
<state>2000</state>\r
</option>\r
+ <option>\r
+ <name>OCJLinkTraceSource</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>OCJLinkTraceSourceDummy</name>\r
+ <state>0</state>\r
+ </option>\r
</data>\r
</settings>\r
<settings>\r
</option>\r
</data>\r
</settings>\r
+ <settings>\r
+ <name>RDIJTAGJET_ID</name>\r
+ <archiveVersion>0</archiveVersion>\r
+ <data>\r
+ <version>1</version>\r
+ <wantNonLocal>1</wantNonLocal>\r
+ <debug>1</debug>\r
+ <option>\r
+ <name>CRDILogFileCheck</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CRDILogFileEdit</name>\r
+ <state>$PROJ_DIR$\cspycomm.log</state>\r
+ </option>\r
+ <option>\r
+ <name>CCRDIHWReset</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCRDICatchReset</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCRDICatchUndef</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCRDICatchSWI</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCRDICatchData</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCRDICatchPrefetch</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCRDICatchIRQ</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>CCRDICatchFIQ</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>OCDriverInfo</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>JTAGjetConfigure</name>\r
+ <state></state>\r
+ </option>\r
+ </data>\r
+ </settings>\r
<settings>\r
<name>STLINK_ID</name>\r
<archiveVersion>2</archiveVersion>\r
</option>\r
</data>\r
</settings>\r
+ <settings>\r
+ <name>XDS100_ID</name>\r
+ <archiveVersion>2</archiveVersion>\r
+ <data>\r
+ <version>1</version>\r
+ <wantNonLocal>1</wantNonLocal>\r
+ <debug>1</debug>\r
+ <option>\r
+ <name>OCDriverInfo</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>OCXDS100AttachSlave</name>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>TIPackageOverride</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>TIPackage</name>\r
+ <state></state>\r
+ </option>\r
+ <option>\r
+ <name>CCXds100InterfaceList</name>\r
+ <version>0</version>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>BoardFile</name>\r
+ <state></state>\r
+ </option>\r
+ </data>\r
+ </settings>\r
<debuggerPlugins>\r
+ <plugin>\r
+ <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file>\r
+ <loadFlag>0</loadFlag>\r
+ </plugin>\r
<plugin>\r
<file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>\r
<loadFlag>0</loadFlag>\r
<loadFlag>0</loadFlag>\r
</plugin>\r
<plugin>\r
- <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>\r
- <loadFlag>1</loadFlag>\r
- </plugin>\r
- <plugin>\r
- <file>$EW_DIR$\common\plugins\FreeRTOS\FreeRTOSPlugin.ewplugin</file>\r
+ <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>\r
<loadFlag>0</loadFlag>\r
</plugin>\r
<plugin>\r
- <file>$EW_DIR$\common\plugins\OpenRTOS\OpenRTOSPlugin.ewplugin</file>\r
- <loadFlag>0</loadFlag>\r
+ <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>\r
+ <loadFlag>1</loadFlag>\r
</plugin>\r
<plugin>\r
<file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>\r
</option>\r
<option>\r
<name>OGLastSavedByProductVersion</name>\r
- <state>5.11.0.50615</state>\r
+ <state>6.30.7.53437</state>\r
</option>\r
<option>\r
<name>GeneralEnableMisra</name>\r
<name>ILINK</name>\r
<archiveVersion>0</archiveVersion>\r
<data>\r
- <version>13</version>\r
+ <version>15</version>\r
<wantNonLocal>1</wantNonLocal>\r
<debug>1</debug>\r
<option>\r
<name>CrcAlign</name>\r
<state>1</state>\r
</option>\r
- <option>\r
- <name>CrcAlgo</name>\r
- <state>1</state>\r
- </option>\r
<option>\r
<name>CrcPoly</name>\r
<state>0x11021</state>\r
<name>IlinkOptForceVfe</name>\r
<state>0</state>\r
</option>\r
+ <option>\r
+ <name>IlinkStackAnalysisEnable</name>\r
+ <state>0</state>\r
+ </option>\r
+ <option>\r
+ <name>IlinkStackControlFile</name>\r
+ <state></state>\r
+ </option>\r
+ <option>\r
+ <name>IlinkStackCallGraphFile</name>\r
+ <state></state>\r
+ </option>\r
+ <option>\r
+ <name>CrcAlgorithm</name>\r
+ <version>0</version>\r
+ <state>1</state>\r
+ </option>\r
+ <option>\r
+ <name>CrcUnitSize</name>\r
+ <version>0</version>\r
+ <state>0</state>\r
+ </option>\r
</data>\r
</settings>\r
<settings>\r
<group>\r
<name>Scheduler files</name>\r
<file>\r
- <name>$PROJ_DIR$\..\..\Source\portable\MemMang\heap_2.c</name>\r
+ <name>$PROJ_DIR$\..\..\Source\portable\MemMang\heap_4.c</name>\r
</file>\r
<file>\r
<name>$PROJ_DIR$\..\..\Source\list.c</name>\r
FreeRTOS WEB site.\r
\r
1 tab == 4 spaces!\r
- \r
+\r
***************************************************************************\r
* *\r
* Having a problem? Start by reading the FAQ "My application does *\r
* *\r
***************************************************************************\r
\r
- \r
- http://www.FreeRTOS.org - Documentation, training, latest information, \r
+\r
+ http://www.FreeRTOS.org - Documentation, training, latest information,\r
license and contact details.\r
- \r
+\r
http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,\r
including FreeRTOS+Trace - an indispensable productivity tool.\r
\r
- Real Time Engineers ltd license FreeRTOS to High Integrity Systems, who sell \r
- the code with commercial support, indemnification, and middleware, under \r
+ Real Time Engineers ltd license FreeRTOS to High Integrity Systems, who sell\r
+ the code with commercial support, indemnification, and middleware, under\r
the OpenRTOS brand: http://www.OpenRTOS.com. High Integrity Systems also\r
- provide a safety engineered and independently SIL3 certified version under \r
+ provide a safety engineered and independently SIL3 certified version under\r
the SafeRTOS brand: http://www.SafeRTOS.com.\r
*/\r
\r
@REM C-SPY Debugger, as an aid to preparing a command line for running\r
@REM the cspybat command line utility using the appropriate settings.\r
@REM\r
-@REM You can launch cspybat by typing the name of this batch file followed\r
-@REM by the name of the debug file (usually an ELF/DWARF or UBROF file).\r
@REM Note that this file is generated every time a new debug session\r
@REM is initialized, so you may want to move or rename the file before\r
@REM making changes.\r
+@REM\r
+@REM You can launch cspybat by typing the name of this batch file followed\r
+@REM by the name of the debug file (usually an ELF/DWARF or UBROF file).\r
+@REM\r
+@REM Read about available command line parameters in the C-SPY Debugging\r
+@REM Guide. Hints about additional command line parameters that may be\r
+@REM useful in specific cases:\r
+@REM --download_only Downloads a code image without starting a debug\r
+@REM session afterwards.\r
+@REM --silent Omits the sign-on message.\r
+@REM --timeout Limits the maximum allowed execution time.\r
@REM \r
\r
\r
<Project>\r
<Desktop>\r
<Static>\r
- <Debug-Log/>\r
+ <Debug-Log><ColumnWidth0>20</ColumnWidth0><ColumnWidth1>1622</ColumnWidth1></Debug-Log>\r
<Build>\r
<ColumnWidth0>20</ColumnWidth0>\r
<ColumnWidth1>1006</ColumnWidth1>\r
\r
\r
\r
- <Column0>124</Column0><Column1>27</Column1><Column2>27</Column2><Column3>27</Column3></ColumnWidths>\r
+ <Column0>164</Column0><Column1>27</Column1><Column2>27</Column2><Column3>27</Column3></ColumnWidths>\r
</Workspace>\r
<Disassembly>\r
<PreferedWindows>\r
<Position>2</Position><ScreenPosX>0</ScreenPosX><ScreenPosY>0</ScreenPosY><Windows/></PreferedWindows>\r
\r
\r
- <MixedMode>1</MixedMode><CodeCovShow>0</CodeCovShow></Disassembly>\r
+ <MixedMode>1</MixedMode><CodeCovShow>0</CodeCovShow><col-names><item>Disassembly</item><item>_I0</item></col-names><col-widths><item>500</item><item>20</item></col-widths><DisasmHistory/><ShowCodeCoverage>0</ShowCodeCoverage><ShowInstrProfiling>0</ShowInstrProfiling></Disassembly>\r
<Watch><Format><struct_types/><watch_formats/></Format></Watch><QuickWatch><PreferedWindows><Position>2</Position><ScreenPosX>0</ScreenPosX><ScreenPosY>0</ScreenPosY><Windows/></PreferedWindows><Column0>100</Column0><Column1>100</Column1><Column2>100</Column2><Column3>100</Column3></QuickWatch></Static>\r
<Windows>\r
\r
\r
- <Wnd1>\r
+ <Wnd2>\r
<Tabs>\r
<Tab>\r
<Identity>TabID-10465-12018</Identity>\r
</Tab>\r
</Tabs>\r
\r
- <SelectedTab>0</SelectedTab></Wnd1><Wnd3>\r
+ <SelectedTab>0</SelectedTab></Wnd2><Wnd4>\r
<Tabs>\r
<Tab>\r
<Identity>TabID-21213-12021</Identity>\r
<Factory>Workspace</Factory>\r
<Session>\r
\r
- <NodeDict><ExpandedNode>RTOSDemo</ExpandedNode><ExpandedNode>RTOSDemo/Demo files</ExpandedNode></NodeDict></Session>\r
+ <NodeDict><ExpandedNode>RTOSDemo</ExpandedNode><ExpandedNode>RTOSDemo/Demo files</ExpandedNode><ExpandedNode>RTOSDemo/System files</ExpandedNode><ExpandedNode>RTOSDemo/uIP files</ExpandedNode></NodeDict></Session>\r
</Tab>\r
</Tabs>\r
\r
- <SelectedTab>0</SelectedTab></Wnd3><Wnd0><Tabs><Tab><Identity>TabID-4412-20270</Identity><TabName>Disassembly</TabName><Factory>Disassembly</Factory><Session/></Tab></Tabs><SelectedTab>0</SelectedTab></Wnd0></Windows>\r
+ <SelectedTab>0</SelectedTab></Wnd4></Windows>\r
<Editor>\r
\r
\r
\r
\r
- <Pane><Tab><Factory>TextEditor</Factory><Filename>
C:\E\Dev\FreeRTOS\WorkingCopy2\Demo\CORTEX_LM3Sxxxx_IAR_Keil\main.c</Filename><XPos>0</XPos><YPos>193</YPos><SelStart>8396</SelStart><SelEnd>8396</SelEnd></Tab><Tab><Factory>TextEditor</Factory><Filename>C:\E\Dev\FreeRTOS\WorkingCopy2\Demo\CORTEX_LM3Sxxxx_IAR_Keil\timertest.c</Filename><XPos>0</XPos><YPos>120</YPos><SelStart>5377</SelStart><SelEnd>5377</SelEnd></Tab><ActiveTab>1</ActiveTab></Pane><ActivePane>0</ActivePane><Sizes><Pane><X>1000000</X><Y>1000000</Y></Pane></Sizes><SplitMode>1</SplitMode></Editor>
\r+ <Pane><Tab><Factory>TextEditor</Factory><Filename>
$WS_DIR$\main.c</Filename><XPos>0</XPos><YPos>239</YPos><SelStart>11530</SelStart><SelEnd>11539</SelEnd></Tab><Tab><Factory>TextEditor</Factory><Filename>$WS_DIR$\..\..\Source\portable\IAR\ARM_CM3\portmacro.h</Filename><XPos>0</XPos><YPos>104</YPos><SelStart>6155</SelStart><SelEnd>6155</SelEnd></Tab><Tab><Factory>TextEditor</Factory><Filename>$WS_DIR$\FreeRTOSConfig.h</Filename><XPos>0</XPos><YPos>96</YPos><SelStart>5044</SelStart><SelEnd>5044</SelEnd></Tab><Tab><Factory>TextEditor</Factory><Filename>$WS_DIR$\..\..\Source\tasks.c</Filename><XPos>0</XPos><YPos>473</YPos><SelStart>21918</SelStart><SelEnd>21918</SelEnd></Tab><Tab><Factory>TextEditor</Factory><Filename>$WS_DIR$\..\..\Source\portable\IAR\ARM_CM3\port.c</Filename><XPos>0</XPos><YPos>162</YPos><SelStart>7773</SelStart><SelEnd>7773</SelEnd></Tab><Tab><Factory>TextEditor</Factory><Filename>$WS_DIR$\..\..\Source\list.c</Filename><XPos>0</XPos><YPos>148</YPos><SelStart>7981</SelStart><SelEnd>7981</SelEnd></Tab><Tab><Factory>TextEditor</Factory><Filename>$WS_DIR$\webserver\uIP_Task.c</Filename><XPos>0</XPos><YPos>123</YPos><SelStart>6722</SelStart><SelEnd>6722</SelEnd></Tab><Tab><Factory>TextEditor</Factory><Filename>$WS_DIR$\webserver\emac.c</Filename><XPos>0</XPos><YPos>215</YPos><SelStart>8795</SelStart><SelEnd>8795</SelEnd></Tab><Tab><Factory>TextEditor</Factory><Filename>$WS_DIR$\startup_ewarm.c</Filename><XPos>0</XPos><YPos>136</YPos><SelStart>7437</SelStart><SelEnd>7441</SelEnd></Tab><ActiveTab>8</ActiveTab></Pane><ActivePane>0</ActivePane><Sizes><Pane><X>1000000</X><Y>1000000</Y></Pane></Sizes><SplitMode>1</SplitMode></Editor>
\r <Positions>\r
\r
\r
\r
\r
\r
- <Top><Row0><Sizes><Toolbar-01282438><key>iaridepm.enu1</key></Toolbar-01282438><Toolbar-05fc2d28><key>debuggergui.enu1</key></Toolbar-05fc2d28></Sizes></Row0></Top><Left><Row0><Sizes><Wnd3><Rect><Top>-2</Top><Left>-2</Left><Bottom>740</Bottom><Right>198</Right><x>-2</x><y>-2</y><xscreen>200</xscreen><yscreen>200</yscreen><sizeHorzCX>142857</sizeHorzCX><sizeHorzCY>203666</sizeHorzCY><sizeVertCX>142857</sizeVertCX><sizeVertCY>755601</sizeVertCY></Rect></Wnd3></Sizes></Row0></Left><Right><Row0><Sizes><Wnd0><Rect><Top>-2</Top><Left>-2</Left><Bottom>740</Bottom><Right>488</Right><x>-2</x><y>-2</y><xscreen>200</xscreen><yscreen>200</yscreen><sizeHorzCX>142857</sizeHorzCX><sizeHorzCY>203666</sizeHorzCY><sizeVertCX>350000</sizeVertCX><sizeVertCY>755601</sizeVertCY></Rect></Wnd0></Sizes></Row0></Right><Bottom><Row0><Sizes><Wnd1><Rect><Top>-2</Top><Left>-2</Left><Bottom>198</Bottom><Right>1402</Right><x>-2</x><y>-2</y><xscreen>1404</xscreen><yscreen>200</yscreen><sizeHorzCX>1002857</sizeHorzCX><sizeHorzCY>203666</sizeHorzCY><sizeVertCX>142857</sizeVertCX><sizeVertCY>203666</sizeVertCY></Rect></Wnd1></Sizes></Row0></Bottom><Float><Sizes/></Float></Positions>\r
+ <Top><Row0><Sizes><Toolbar-01349300><key>iaridepm.enu1</key></Toolbar-01349300><Toolbar-04ca1b78><key>debuggergui.enu1</key></Toolbar-04ca1b78></Sizes></Row0></Top><Left><Row0><Sizes><Wnd4><Rect><Top>-2</Top><Left>-2</Left><Bottom>740</Bottom><Right>238</Right><x>-2</x><y>-2</y><xscreen>240</xscreen><yscreen>200</yscreen><sizeHorzCX>142857</sizeHorzCX><sizeHorzCY>203666</sizeHorzCY><sizeVertCX>142857</sizeVertCX><sizeVertCY>755601</sizeVertCY></Rect></Wnd4></Sizes></Row0></Left><Right><Row0><Sizes/></Row0></Right><Bottom><Row0><Sizes><Wnd2><Rect><Top>-2</Top><Left>-2</Left><Bottom>198</Bottom><Right>1682</Right><x>-2</x><y>-2</y><xscreen>1684</xscreen><yscreen>200</yscreen><sizeHorzCX>1002381</sizeHorzCX><sizeHorzCY>203666</sizeHorzCY><sizeVertCX>142857</sizeVertCX><sizeVertCY>203666</sizeVertCY></Rect></Wnd2></Sizes></Row0></Bottom><Float><Sizes/></Float></Positions>\r
</Desktop>\r
</Project>\r
\r
TriggerName=main\r
LimitSize=0\r
ByteLimit=50\r
-[Log file]\r
-LoggingEnabled=_ 0\r
-LogFile=_ ""\r
-Category=_ 0\r
-[TermIOLog]\r
-LoggingEnabled=_ 0\r
-LogFile=_ ""\r
[Stack]\r
FillEnabled=0\r
OverflowWarningsEnabled=1\r
TriggerName=main\r
LimitSize=0\r
ByteLimit=50\r
+[LMIFTDIDriver]\r
+LMI_ResetMode=0x00000000\r
+[DebugChecksum]\r
+Checksum=-644613366\r
+[Exceptions]\r
+StopOnUncaught=_ 0\r
+StopOnThrow=_ 0\r
+[CallStack]\r
+ShowArgs=0\r
+[Disassembly]\r
+MixedMode=1\r
+[Log file]\r
+LoggingEnabled=_ 0\r
+LogFile=_ ""\r
+Category=_ 0\r
+[TermIOLog]\r
+LoggingEnabled=_ 0\r
+LogFile=_ ""\r
+[CallStackLog]\r
+Enabled=0\r
+[DriverProfiling]\r
+Enabled=0\r
+Mode=0\r
+Graph=0\r
+Symbiont=0\r
+Exclusions=\r
[Disassemble mode]\r
mode=1\r
[Breakpoints]\r
-Bp0=_ "STD_CODE" "{$PROJ_DIR$\..\..\..\WorkingCopy2\Demo\Common\Minimal\IntQueue.c}.363.2@1" 1 0 0 0 "" 0 ""\r
-Count=1\r
+Bp0=_ "STD_CODE" "{$PROJ_DIR$\..\..\..\WorkingCopy2\Demo\Common\Minimal\IntQueue.c}.363.2@1" 0 0 0 0 "" 0 ""\r
+Bp1=_ "STD_CODE" "{$PROJ_DIR$\webserver\uIP_Task.c}.197.4" 1 0 0 0 "" 0 ""\r
+Count=2\r
[Aliases]\r
Count=0\r
SuppressDialog=0\r
<Factory>Workspace</Factory>\r
<Session>\r
\r
- <NodeDict><ExpandedNode>RTOSDemo</ExpandedNode><ExpandedNode>RTOSDemo/Demo files</ExpandedNode></NodeDict></Session>\r
+ <NodeDict><ExpandedNode>RTOSDemo</ExpandedNode><ExpandedNode>RTOSDemo/Demo files</ExpandedNode><ExpandedNode>RTOSDemo/Scheduler files</ExpandedNode></NodeDict></Session>\r
</Tab>\r
</Tabs>\r
\r
\r
\r
\r
- <Pane><Tab><Factory>TextEditor</Factory><Filename>$WS_DIR$\main.c</Filename><XPos>0</XPos><YPos>
0</YPos><SelStart>0</SelStart><SelEnd>0</SelEnd></Tab><ActiveTab>0</ActiveTab></Pane><ActivePane>0</ActivePane><Sizes><Pane><X>1000000</X><Y>1000000</Y></Pane></Sizes><SplitMode>1</SplitMode></Editor>
\r+ <Pane><Tab><Factory>TextEditor</Factory><Filename>$WS_DIR$\main.c</Filename><XPos>0</XPos><YPos>
239</YPos><SelStart>11530</SelStart><SelEnd>11539</SelEnd></Tab><Tab><Factory>TextEditor</Factory><Filename>$WS_DIR$\..\..\Source\portable\IAR\ARM_CM3\portmacro.h</Filename><XPos>0</XPos><YPos>125</YPos><SelStart>6155</SelStart><SelEnd>6155</SelEnd></Tab><Tab><Factory>TextEditor</Factory><Filename>$WS_DIR$\FreeRTOSConfig.h</Filename><XPos>0</XPos><YPos>96</YPos><SelStart>6091</SelStart><SelEnd>6091</SelEnd></Tab><ActiveTab>2</ActiveTab><Tab><Factory>TextEditor</Factory><Filename>$WS_DIR$\..\..\Source\tasks.c</Filename><XPos>0</XPos><YPos>473</YPos><SelStart>21918</SelStart><SelEnd>21918</SelEnd></Tab><Tab><Factory>TextEditor</Factory><Filename>$WS_DIR$\..\..\Source\portable\IAR\ARM_CM3\port.c</Filename><XPos>0</XPos><YPos>162</YPos><SelStart>7773</SelStart><SelEnd>7773</SelEnd></Tab><Tab><Factory>TextEditor</Factory><Filename>$WS_DIR$\..\..\Source\list.c</Filename><XPos>0</XPos><YPos>148</YPos><SelStart>7981</SelStart><SelEnd>7981</SelEnd></Tab><Tab><Factory>TextEditor</Factory><Filename>$WS_DIR$\webserver\uIP_Task.c</Filename><XPos>0</XPos><YPos>123</YPos><SelStart>6722</SelStart><SelEnd>6722</SelEnd></Tab><Tab><Factory>TextEditor</Factory><Filename>$WS_DIR$\webserver\emac.c</Filename><XPos>0</XPos><YPos>215</YPos><SelStart>8795</SelStart><SelEnd>8795</SelEnd></Tab><Tab><Factory>TextEditor</Factory><Filename>$WS_DIR$\startup_ewarm.c</Filename><XPos>0</XPos><YPos>136</YPos><SelStart>7437</SelStart><SelEnd>7441</SelEnd></Tab></Pane><ActivePane>0</ActivePane><Sizes><Pane><X>1000000</X><Y>1000000</Y></Pane></Sizes><SplitMode>1</SplitMode></Editor>
\r <Positions>\r
\r
\r
\r
\r
\r
- <Top><Row0><Sizes><Toolbar-01336218><key>iaridepm.enu1</key></Toolbar-01336218></Sizes></Row0></Top><Left><Row0><Sizes><Wnd2><Rect><Top>-2</Top><Left>-2</Left><Bottom>760</Bottom><Right>315</Right><x>-2</x><y>-2</y><xscreen>200</xscreen><yscreen>200</yscreen><sizeHorzCX>119048</sizeHorzCX><sizeHorzCY>203666</sizeHorzCY><sizeVertCX>188690</sizeVertCX><sizeVertCY>775967</sizeVertCY></Rect></Wnd2></Sizes></Row0></Left><Right><Row0><Sizes/></Row0></Right><Bottom><Row0><Sizes><Wnd3><Rect><Top>-2</Top><Left>-2</Left><Bottom>178</Bottom><Right>1682</Right><x>-2</x><y>-2</y><xscreen>1684</xscreen><yscreen>180</yscreen><sizeHorzCX>1002381</sizeHorzCX><sizeHorzCY>183299</sizeHorzCY><sizeVertCX>119048</sizeVertCX><sizeVertCY>203666</sizeVertCY></Rect></Wnd3></Sizes></Row0></Bottom><Float><Sizes/></Float></Positions>\r
+ <Top><Row0><Sizes><Toolbar-01349300><key>iaridepm.enu1</key></Toolbar-01349300></Sizes></Row0><Row1><Sizes/></Row1></Top><Left><Row0><Sizes><Wnd2><Rect><Top>-2</Top><Left>-2</Left><Bottom>760</Bottom><Right>315</Right><x>-2</x><y>-2</y><xscreen>200</xscreen><yscreen>200</yscreen><sizeHorzCX>119048</sizeHorzCX><sizeHorzCY>203666</sizeHorzCY><sizeVertCX>188690</sizeVertCX><sizeVertCY>775967</sizeVertCY></Rect></Wnd2></Sizes></Row0></Left><Right><Row0><Sizes/></Row0></Right><Bottom><Row0><Sizes><Wnd3><Rect><Top>-2</Top><Left>-2</Left><Bottom>178</Bottom><Right>1682</Right><x>-2</x><y>-2</y><xscreen>1684</xscreen><yscreen>180</yscreen><sizeHorzCX>1002381</sizeHorzCX><sizeHorzCY>183299</sizeHorzCY><sizeVertCX>119048</sizeVertCX><sizeVertCY>203666</sizeVertCY></Rect></Wnd3></Sizes></Row0></Bottom><Float><Sizes/></Float></Positions>\r
</Desktop>\r
</Workspace>\r
\r
/*\r
FreeRTOS V7.2.0 - Copyright (C) 2012 Real Time Engineers Ltd.\r
- \r
+\r
\r
***************************************************************************\r
* *\r
FreeRTOS WEB site.\r
\r
1 tab == 4 spaces!\r
- \r
+\r
***************************************************************************\r
* *\r
* Having a problem? Start by reading the FAQ "My application does *\r
* *\r
***************************************************************************\r
\r
- \r
- http://www.FreeRTOS.org - Documentation, training, latest information, \r
+\r
+ http://www.FreeRTOS.org - Documentation, training, latest information,\r
license and contact details.\r
- \r
+\r
http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,\r
including FreeRTOS+Trace - an indispensable productivity tool.\r
\r
- Real Time Engineers ltd license FreeRTOS to High Integrity Systems, who sell \r
- the code with commercial support, indemnification, and middleware, under \r
+ Real Time Engineers ltd license FreeRTOS to High Integrity Systems, who sell\r
+ the code with commercial support, indemnification, and middleware, under\r
the OpenRTOS brand: http://www.OpenRTOS.com. High Integrity Systems also\r
- provide a safety engineered and independently SIL3 certified version under \r
+ provide a safety engineered and independently SIL3 certified version under\r
the SafeRTOS brand: http://www.SafeRTOS.com.\r
*/\r
\r
#define configUSE_PREEMPTION 1\r
#define configUSE_IDLE_HOOK 0\r
#define configUSE_TICK_HOOK 1\r
-#define configCPU_CLOCK_HZ ( ( unsigned long ) 50000000 )\r
+#define configCPU_CLOCK_HZ ( 50000000UL )\r
#define configTICK_RATE_HZ ( ( portTickType ) 1000 )\r
#define configMINIMAL_STACK_SIZE ( ( unsigned short ) 80 )\r
#define configTOTAL_HEAP_SIZE ( ( size_t ) ( 24000 ) )\r
#define configGENERATE_RUN_TIME_STATS 1\r
#define configUSE_MALLOC_FAILED_HOOK 1\r
\r
-#define configMAX_PRIORITIES ( ( unsigned portBASE_TYPE ) 5 )\r
+#define configMAX_PRIORITIES ( 5UL )\r
#define configMAX_CO_ROUTINE_PRIORITIES ( 2 )\r
\r
/* Set the following definitions to 1 to include the API function, or zero\r
#define portCONFIGURE_TIMER_FOR_RUN_TIME_STATS() ( ulHighFrequencyTimerTicks = 0UL )\r
#define portGET_RUN_TIME_COUNTER_VALUE() ulHighFrequencyTimerTicks\r
\r
+/* Use Cortex-M3 optimised task selection rather than the generic C code\r
+version. */\r
+#define configUSE_PORT_OPTIMISED_TASK_SELECTION 1\r
+\r
#endif /* FREERTOS_CONFIG_H */\r
<!DOCTYPE CrossStudio_Project_File>
-<solution Name="RTOSDemo" version="2">
+<solution Name="RTOSDemo" target="8" version="2">
<project Name="RTOSDemo">
<configuration Name="Common" Target="LM3S8962" arm_architecture="v7M" arm_core_type="Cortex-M3" arm_linker_fiq_stack_size="0" arm_linker_heap_size="0" arm_linker_irq_stack_size="0" arm_linker_stack_size="512" arm_simulator_memory_simulation_filename="$(PackagesDir)/targets/Luminary_LM3S/LM3SSimulatorMemory.dll" arm_simulator_memory_simulation_parameter="0x40000;0x10000" arm_target_debug_interface_type="ADIv5" arm_target_flash_loader_type="LIBMEM RPC Loader" build_remove_unused_symbols="No" c_preprocessor_definitions="PACK_STRUCT_END=__attribute((packed));ALIGN_STRUCT_END=__attribute((aligned(4)));sprintf=usprintf;snprintf=usnprintf;printf=uipprintf" c_user_include_directories="..\\Common\\ethernet\\uIP\\uip-1.0\\uip;..\\..\\Source\\include;..\\..\\Source\\portable\\GCC\\ARM_CM3;..\\Common\\include;..\\Common\\drivers\\LuminaryMicro;.\\webserver;.;$(SamplesDir)/Luminary_Stellaris_Driver_Library" linker_additional_files="" linker_memory_map_file="$(PackagesDir)/targets/Luminary_LM3S/LM3S8962_MemoryMap.xml" linker_output_format="None" linker_printf_fmt_level="int" linker_printf_width_precision_supported="No" linker_scanf_fmt_level="int" project_directory="" project_type="Executable" property_groups_file_path="$(PackagesDir)/targets/Luminary_LM3S/propertyGroups.xml"/>
<configuration Name="Flash" Placement="Flash" arm_target_flash_loader_file_path="$(PackagesDir)/targets/Luminary_LM3S/Release/Loader.elf" linker_section_placement_file="$(PackagesDir)/targets/Luminary_LM3S/flash_placement.xml" target_reset_script="FLASHReset()"/>
<file file_name="../../Source/list.c"/>
<file file_name="../../Source/queue.c"/>
<file file_name="../../Source/portable/GCC/ARM_CM3/port.c"/>
- <file file_name="../../Source/portable/MemMang/heap_2.c"/>
+ <file file_name="../../Source/portable/MemMang/heap_4.c"/>
</folder>
<file file_name="main.c"/>
<file file_name="timertest.c"/>
<session>
<Bookmarks/>
<Breakpoints/>
+ <ETMWindow>
+ <ETMRegister number="0" value="800" />
+ <ETMRegister number="8" value="6f" />
+ <ETMRegister number="9" value="1000000" />
+ </ETMWindow>
<ExecutionCountWindow/>
<Memory1>
<MemoryWindow autoEvaluate="0" addressText="0x200002d0" numColumns="8" sizeText="120" dataSize="1" radix="16" addressSpace="" />
<ProjectSessionItem path="RTOSDemo" name="unnamed" />
<ProjectSessionItem path="RTOSDemo;RTOSDemo" name="unnamed" />
<ProjectSessionItem path="RTOSDemo;RTOSDemo;Source Files" name="unnamed" />
+ <ProjectSessionItem path="RTOSDemo;RTOSDemo;Source Files;FreeRTOS" name="unnamed" />
+ <ProjectSessionItem path="RTOSDemo;RTOSDemo;Source Files;include" name="unnamed" />
+ <ProjectSessionItem path="RTOSDemo;RTOSDemo;Source Files;WEB Server" name="unnamed" />
</Project>
<Register1>
- <RegisterWindow openNodes="CPU;CPU/xPSR;CPU/CFBP" binaryNodes="" unsignedNodes="" visibleGroups="CPU" decimalNodes="" octalNodes="" asciiNodes="" />
+ <RegisterWindow openNodes="CPU;CPU/xPSR;CPU/CFBP" binaryNodes="" hiddenNodes="" unsignedNodes="" visibleGroups="CPU" decimalNodes="" octalNodes="" asciiNodes="" />
</Register1>
<Register2>
- <RegisterWindow openNodes="" binaryNodes="" unsignedNodes="" visibleGroups="" decimalNodes="" octalNodes="" asciiNodes="" />
+ <RegisterWindow openNodes="" binaryNodes="" hiddenNodes="" unsignedNodes="" visibleGroups="" decimalNodes="" octalNodes="" asciiNodes="" />
</Register2>
<Register3>
- <RegisterWindow openNodes="" binaryNodes="" unsignedNodes="" visibleGroups="" decimalNodes="" octalNodes="" asciiNodes="" />
+ <RegisterWindow openNodes="" binaryNodes="" hiddenNodes="" unsignedNodes="" visibleGroups="" decimalNodes="" octalNodes="" asciiNodes="" />
</Register3>
<Register4>
- <RegisterWindow openNodes="" binaryNodes="" unsignedNodes="" visibleGroups="" decimalNodes="" octalNodes="" asciiNodes="" />
+ <RegisterWindow openNodes="" binaryNodes="" hiddenNodes="" unsignedNodes="" visibleGroups="" decimalNodes="" octalNodes="" asciiNodes="" />
</Register4>
<TargetWindow programAction="" uploadFileType="" programLoadAddress="" programSize="" uploadFileName="" uploadMemoryInterface="" programFileName="" uploadStartAddress="" programFileType="" uploadSize="" programMemoryInterface="" />
<TraceWindow>
<Trace enabled="Yes" />
</TraceWindow>
<Watch1>
- <Watches active="1" update="Never" />
+ <Watches active="0" update="Never" />
</Watch1>
<Watch2>
<Watches active="0" update="Never" />
</Watch2>
<Watch3>
- <Watches active="0" update="Never" />
+ <Watches active="1" update="Never" />
</Watch3>
<Watch4>
<Watches active="0" update="Never" />
</Watch4>
<Files>
- <SessionOpenFile useTextEdit="1" useBinaryEdit="0" codecName="Latin1" x="0" debugPath="C:\E\Dev\FreeRTOS\Trial\FreeRTOS_MPU\FreeRTOS\Demo\CORTEX_MPU_LM3Sxxxx_Rowley\main.c" y="219" path="C:\E\Dev\FreeRTOS\Trial\FreeRTOS_MPU\FreeRTOS\Demo\CORTEX_MPU_LM3Sxxxx_Rowley\main.c" left="0" selected="1" name="unnamed" top="209" />
+ <SessionOpenFile useTextEdit="1" useBinaryEdit="0" codecName="Latin1" x="0" debugPath="C:\E\Dev\FreeRTOS\WorkingCopy\FreeRTOS\Demo\CORTEX_LM3Sxxxx_Rowley\main.c" y="238" path="C:\E\Dev\FreeRTOS\WorkingCopy\FreeRTOS\Demo\CORTEX_LM3Sxxxx_Rowley\main.c" left="0" selected="1" name="unnamed" top="63" />
</Files>
- <ARMCrossStudioWindow activeProject="RTOSDemo" autoConnectTarget="Luminary USB Debug" debugSearchFileMap="" fileDialogInitialDirectory="C:\E\Dev\FreeRTOS\Trial\FreeRTOS_MPU\FreeRTOS\Demo\Common\drivers\LuminaryMicro" fileDialogDefaultFilter="*.*" autoConnectCapabilities="388991" debugSearchPath="" buildConfiguration="THUMB Flash Debug" />
+ <ARMCrossStudioWindow activeProject="RTOSDemo" autoConnectTarget="Luminary USB Debug" debugSearchFileMap="" fileDialogInitialDirectory="C:\E\Dev\FreeRTOS\WorkingCopy\FreeRTOS\Source\portable\MemMang" fileDialogDefaultFilter="*.*" autoConnectCapabilities="388991" debugSearchPath="" buildConfiguration="THUMB Flash Debug" />
</session>
/*\r
FreeRTOS V7.2.0 - Copyright (C) 2012 Real Time Engineers Ltd.\r
- \r
+\r
\r
***************************************************************************\r
* *\r
FreeRTOS WEB site.\r
\r
1 tab == 4 spaces!\r
- \r
+\r
***************************************************************************\r
* *\r
* Having a problem? Start by reading the FAQ "My application does *\r
* *\r
***************************************************************************\r
\r
- \r
- http://www.FreeRTOS.org - Documentation, training, latest information, \r
+\r
+ http://www.FreeRTOS.org - Documentation, training, latest information,\r
license and contact details.\r
- \r
+\r
http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,\r
including FreeRTOS+Trace - an indispensable productivity tool.\r
\r
- Real Time Engineers ltd license FreeRTOS to High Integrity Systems, who sell \r
- the code with commercial support, indemnification, and middleware, under \r
+ Real Time Engineers ltd license FreeRTOS to High Integrity Systems, who sell\r
+ the code with commercial support, indemnification, and middleware, under\r
the OpenRTOS brand: http://www.OpenRTOS.com. High Integrity Systems also\r
- provide a safety engineered and independently SIL3 certified version under \r
+ provide a safety engineered and independently SIL3 certified version under\r
the SafeRTOS brand: http://www.SafeRTOS.com.\r
*/\r
\r
#endif\r
\r
/*-----------------------------------------------------------\r
- * Port specific definitions. \r
+ * Port specific definitions.\r
*\r
* The settings in this file configure FreeRTOS correctly for the\r
* given hardware and compiler.\r
typedef unsigned portLONG portTickType;\r
#define portMAX_DELAY ( portTickType ) 0xffffffff\r
#endif\r
-/*-----------------------------------------------------------*/ \r
+/*-----------------------------------------------------------*/\r
\r
/* Architecture specifics. */\r
#define portSTACK_GROWTH ( -1 )\r
-#define portTICK_RATE_MS ( ( portTickType ) 1000 / configTICK_RATE_HZ ) \r
+#define portTICK_RATE_MS ( ( portTickType ) 1000 / configTICK_RATE_HZ )\r
#define portBYTE_ALIGNMENT 8\r
-/*-----------------------------------------------------------*/ \r
+/*-----------------------------------------------------------*/\r
\r
\r
/* Scheduler utilities. */\r
\r
/* Critical section management. */\r
\r
-/* \r
+/*\r
* Set basepri to portMAX_SYSCALL_INTERRUPT_PRIORITY without effecting other\r
* registers. r0 is clobbered.\r
- */ \r
+ */\r
#define portSET_INTERRUPT_MASK() \\r
__asm volatile \\r
( \\r
" msr basepri, r0 \n" \\r
::"i"(configMAX_SYSCALL_INTERRUPT_PRIORITY):"r0" \\r
)\r
- \r
+\r
/*\r
* Set basepri back to 0 without effective other registers.\r
- * r0 is clobbered. FAQ: Setting BASEPRI to 0 is not a bug. Please see \r
+ * r0 is clobbered. FAQ: Setting BASEPRI to 0 is not a bug. Please see\r
* http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html before disagreeing.\r
*/\r
#define portCLEAR_INTERRUPT_MASK() \\r
:::"r0" \\r
)\r
\r
-/* FAQ: Setting BASEPRI to 0 in portCLEAR_INTERRUPT_MASK_FROM_ISR() is not a \r
-bug. Please see http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html before \r
+/* FAQ: Setting BASEPRI to 0 in portCLEAR_INTERRUPT_MASK_FROM_ISR() is not a\r
+bug. Please see http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html before\r
disagreeing. */\r
#define portSET_INTERRUPT_MASK_FROM_ISR() 0;portSET_INTERRUPT_MASK()\r
#define portCLEAR_INTERRUPT_MASK_FROM_ISR(x) portCLEAR_INTERRUPT_MASK();(void)x\r
\r
#define portNOP()\r
\r
+#if configUSE_PORT_OPTIMISED_TASK_SELECTION == 1\r
+\r
+ /* Generic helper function. */\r
+ __attribute__( ( always_inline ) ) static unsigned char ucPortCountLeadingZeros( unsigned long ulBitmap )\r
+ {\r
+ unsigned char ucReturn;\r
+\r
+ __asm volatile ( "clz %0, %1" : "=r" ( ucReturn ) : "r" ( ulBitmap ) );\r
+ return ucReturn;\r
+ }\r
+\r
+ /* Check the configuration. */\r
+ #if( configMAX_PRIORITIES >= 32 )\r
+ #error configUSE_PORT_OPTIMISED_TASK_SELECTION can only be set to 1 when configMAX_PRIORITIES is less than or equal to 32. It is very rare that a system requires more than 10 to 15 difference priorities as tasks that share a priority will time slice.\r
+ #endif\r
+\r
+ /* Store/clear the ready priorities in a bit map. */\r
+ #define portRECORD_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) |= ( 1UL << ( uxPriority ) )\r
+ #define portRESET_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) &= ~( 1UL << ( uxPriority ) )\r
+\r
+ /*-----------------------------------------------------------*/\r
+\r
+ #define portGET_HIGHEST_PRIORITY( uxTopPriority, uxReadyPriorities ) uxTopPriority = ( 31 - ucPortCountLeadingZeros( ( uxReadyPriorities ) ) )\r
+\r
+#endif /* taskRECORD_READY_PRIORITY */\r
+\r
+\r
#ifdef __cplusplus\r
}\r
#endif\r
\r
#define portNOP()\r
\r
+#if configUSE_PORT_OPTIMISED_TASK_SELECTION == 1\r
+\r
+ /* Generic helper function. */\r
+ __attribute__( ( always_inline ) ) static unsigned char ucPortCountLeadingZeros( ulBitmap )\r
+ {\r
+ unsigned char ucReturn;\r
+\r
+ __asm volatile ( "clz %0, %1" : "=r" ( ucReturn ) : "r" ( ulBitmap ) );\r
+ return ucReturn;\r
+ }\r
+\r
+ /* Check the configuration. */\r
+ #if( configMAX_PRIORITIES >= 32 )\r
+ #error configUSE_PORT_OPTIMISED_TASK_SELECTION can only be set to 1 when configMAX_PRIORITIES is less than or equal to 32. It is very rare that a system requires more than 10 to 15 difference priorities as tasks that share a priority will time slice.\r
+ #endif\r
+\r
+ /* Store/clear the ready priorities in a bit map. */\r
+ #define portRECORD_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) |= ( 1UL << ( uxPriority ) )\r
+ #define portRESET_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) &= ~( 1UL << ( uxPriority ) )\r
+\r
+ /*-----------------------------------------------------------*/\r
+\r
+ #define portGET_HIGHEST_PRIORITY( uxTopPriority, uxReadyPriorities ) uxTopPriority = ( 31 - ucPortCountLeadingZeros( ( uxReadyPriorities ) ) )\r
+\r
+#endif /* taskRECORD_READY_PRIORITY */\r
+\r
+\r
#ifdef __cplusplus\r
}\r
#endif\r
FreeRTOS WEB site.\r
\r
1 tab == 4 spaces!\r
- \r
+\r
***************************************************************************\r
* *\r
* Having a problem? Start by reading the FAQ "My application does *\r
* *\r
***************************************************************************\r
\r
- \r
- http://www.FreeRTOS.org - Documentation, training, latest information, \r
+\r
+ http://www.FreeRTOS.org - Documentation, training, latest information,\r
license and contact details.\r
- \r
+\r
http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,\r
including FreeRTOS+Trace - an indispensable productivity tool.\r
\r
- Real Time Engineers ltd license FreeRTOS to High Integrity Systems, who sell \r
- the code with commercial support, indemnification, and middleware, under \r
+ Real Time Engineers ltd license FreeRTOS to High Integrity Systems, who sell\r
+ the code with commercial support, indemnification, and middleware, under\r
the OpenRTOS brand: http://www.OpenRTOS.com. High Integrity Systems also\r
- provide a safety engineered and independently SIL3 certified version under \r
+ provide a safety engineered and independently SIL3 certified version under\r
the SafeRTOS brand: http://www.SafeRTOS.com.\r
*/\r
\r
#define portEND_SWITCHING_ISR( xSwitchRequired ) if( xSwitchRequired ) vPortYieldFromISR()\r
/*-----------------------------------------------------------*/\r
\r
+#if configUSE_PORT_OPTIMISED_TASK_SELECTION == 1\r
+\r
+ /* Check the configuration. */\r
+ #if( configMAX_PRIORITIES >= 32 )\r
+ #error configUSE_PORT_OPTIMISED_TASK_SELECTION can only be set to 1 when configMAX_PRIORITIES is less than or equal to 32. It is very rare that a system requires more than 10 to 15 difference priorities as tasks that share a priority will time slice.\r
+ #endif\r
+\r
+ /* Store/clear the ready priorities in a bit map. */\r
+ #define portRECORD_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) |= ( 1UL << ( uxPriority ) )\r
+ #define portRESET_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) &= ~( 1UL << ( uxPriority ) )\r
+\r
+ /*-----------------------------------------------------------*/\r
+\r
+ #include <intrinsics.h>\r
+ #define portGET_HIGHEST_PRIORITY( uxTopPriority, uxReadyPriorities ) uxTopPriority = ( 31 - __CLZ( ( uxReadyPriorities ) ) )\r
+\r
+#endif /* taskRECORD_READY_PRIORITY */\r
+\r
\r
/* Critical section management. */\r
\r
#define portENTER_CRITICAL() vPortEnterCritical()\r
#define portEXIT_CRITICAL() vPortExitCritical()\r
\r
-/* FAQ: Setting BASEPRI to 0 is not a bug. Please see \r
+/* FAQ: Setting BASEPRI to 0 is not a bug. Please see\r
http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html before disagreeing. */\r
#define portSET_INTERRUPT_MASK_FROM_ISR() 0;vPortSetInterruptMask()\r
#define portCLEAR_INTERRUPT_MASK_FROM_ISR(x) vPortClearInterruptMask();(void)x\r
#define portEND_SWITCHING_ISR( xSwitchRequired ) if( xSwitchRequired ) vPortYieldFromISR()\r
/*-----------------------------------------------------------*/\r
\r
+#if configUSE_PORT_OPTIMISED_TASK_SELECTION == 1\r
+\r
+ /* Check the configuration. */\r
+ #if( configMAX_PRIORITIES >= 32 )\r
+ #error configUSE_PORT_OPTIMISED_TASK_SELECTION can only be set to 1 when configMAX_PRIORITIES is less than or equal to 32. It is very rare that a system requires more than 10 to 15 difference priorities as tasks that share a priority will time slice.\r
+ #endif\r
+\r
+ /* Store/clear the ready priorities in a bit map. */\r
+ #define portRECORD_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) |= ( 1UL << ( uxPriority ) )\r
+ #define portRESET_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) &= ~( 1UL << ( uxPriority ) )\r
+\r
+ /*-----------------------------------------------------------*/\r
+\r
+ #include <intrinsics.h>\r
+ #define portGET_HIGHEST_PRIORITY( uxTopPriority, uxReadyPriorities ) uxTopPriority = ( 31 - __CLZ( ( uxReadyPriorities ) ) )\r
+\r
+#endif /* taskRECORD_READY_PRIORITY */\r
+\r
\r
/* Critical section management. */\r
\r
\r
#define portNOP()\r
\r
+\r
+#if configUSE_PORT_OPTIMISED_TASK_SELECTION == 1\r
+\r
+ /* Check the configuration. */\r
+ #if( configMAX_PRIORITIES >= 32 )\r
+ #error configUSE_PORT_OPTIMISED_TASK_SELECTION can only be set to 1 when configMAX_PRIORITIES is less than or equal to 32. It is very rare that a system requires more than 10 to 15 difference priorities as tasks that share a priority will time slice.\r
+ #endif\r
+\r
+ /* Store/clear the ready priorities in a bit map. */\r
+ #define portRECORD_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) |= ( 1UL << ( uxPriority ) )\r
+ #define portRESET_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) &= ~( 1UL << ( uxPriority ) )\r
+\r
+ /*-----------------------------------------------------------*/\r
+ \r
+ #define portGET_HIGHEST_PRIORITY( uxTopPriority, uxReadyPriorities ) uxTopPriority = ( 31 - __clz( ( uxReadyPriorities ) ) )\r
+\r
+#endif /* taskRECORD_READY_PRIORITY */\r
+\r
+\r
#ifdef __cplusplus\r
}\r
#endif\r
\r
#define portNOP()\r
\r
+\r
+#if configUSE_PORT_OPTIMISED_TASK_SELECTION == 1\r
+\r
+ /* Check the configuration. */\r
+ #if( configMAX_PRIORITIES >= 32 )\r
+ #error configUSE_PORT_OPTIMISED_TASK_SELECTION can only be set to 1 when configMAX_PRIORITIES is less than or equal to 32. It is very rare that a system requires more than 10 to 15 difference priorities as tasks that share a priority will time slice.\r
+ #endif\r
+\r
+ /* Store/clear the ready priorities in a bit map. */\r
+ #define portRECORD_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) |= ( 1UL << ( uxPriority ) )\r
+ #define portRESET_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) &= ~( 1UL << ( uxPriority ) )\r
+\r
+ /*-----------------------------------------------------------*/\r
+ \r
+ #define portGET_HIGHEST_PRIORITY( uxTopPriority, uxReadyPriorities ) uxTopPriority = ( 31 - __clz( ( uxReadyPriorities ) ) )\r
+\r
+#endif /* taskRECORD_READY_PRIORITY */\r
+\r
+\r
#ifdef __cplusplus\r
}\r
#endif\r
projects / freertos / commitdiff