Update donations

diff --git a/docs/home-page/news.txt b/docs/home-page/news.txt
index 065ddf4690c4783449097805160fd8f175eba041..f6cddb61e8fef65ebfa9d1e52fd824e45acef367 100644 (file)
--- a/docs/home-page/news.txt
+++ b/docs/home-page/news.txt
@@ -14,7 +14,8 @@ Results to date of donations for the Data Encryption project
         ClarkConnect            $500    
         Andrew Ford             $25
         Ciphire Labs GmbH       $??
-      Goal: $3000        Total: $1,750
+        InetU, Inc              $1000
+      Goal: $3000        Total: $2,750
 
 Note, the official list is kept by Landon at:
 

diff --git a/docs/manual/storedconf.tex b/docs/manual/storedconf.tex
index ead368b9e00bb987ef0a75611ebe4083d33c21df..44cf7bfb4ddef1f87d934da747c4c4ae9bc53b0c 100644 (file)
--- a/docs/manual/storedconf.tex
+++ b/docs/manual/storedconf.tex
@@ -341,15 +341,19 @@ specified within the Device resource are specific to the Device.
 
 \item [Changer Device = {\it name-string}]
    \index[sd]{Changer Device  }
-   The specified {\bf name-string} gives the system file name of the  autochanger
-   device name that corresponds to the {\bf Archive Device}  specified. This
-   device name is specified if you have an autochanger  or if you want to use the
-   {\bf Alert Command} (see below).  Normally you will specify the {\bf generic
-   SCSI} device  name in this directive. For example, on Linux systems, for 
-   archive device {\bf /dev/nst0}, This directive is optional.  See the 
-   \ilink{ Using Autochangers}{_ChapterStart18}  chapter of this
-   manual for more details of using this and the  following autochanger
-   directives. 
+   The specified {\bf name-string} must be the {\bf generic SCSI} device
+   name of the autochanger that corresponds to the normal read/write
+   {\bf Archive Device}  specified in the Device resource. This
+   gemeric SCSI device name should be specified if you have an autochanger 
+   or if you have a standard tape drive and want to use the
+   {\bf Alert Command} (see below). For example, on Linux systems, for 
+   an Archive Device name of {\bf /dev/nst0}, you would specify {\bf
+   /dev/sg0} for the Changer Device name. Depending on your exact
+   configuration, and the number of autochangers or the type of
+   autochanger, what you specify here can vary.  This directive is
+   optional.  See the \ilink{ Using Autochangers}{_ChapterStart18} chapter
+   of this manual for more details of using this and the following
+   autochanger directives.
 
 \item [Changer Command = {\it name-string}]
    \index[sd]{Changer Command  }

diff --git a/docs/manual/supporteddrives.tex b/docs/manual/supporteddrives.tex
index 3d152cbcd9933b56cbb68b1896444be2cbfc7422..676e9fc2598cfc32af81dcd61895255d5504d77c 100644 (file)
--- a/docs/manual/supporteddrives.tex
+++ b/docs/manual/supporteddrives.tex
@@ -37,6 +37,7 @@ unknown:
  \hline {- } & {ADIC } & {DLT } & {Adic Fastor 22 DLT } & {-  } \\
  \hline {FreeBSD 5.4-RELEASE-p1 amd64 } & {Certance} & {LTO } & {AdicCertance CL400 LTO Ultrium 2 } & {200GB  } \\
  \hline {- } & {- } & {DDS } & {Compaq DDS 2,3,4 } & {-  } \\
+ \hline {SuSE 8.1 Pro} & {Compaq} & {AIT } & {Compaq AIT 35 LVD } & {35/70GB } \\
  \hline {- } & {Exabyte } & {-  } & {Exabyte drives less than 10 years old } & {-  } \\
  \hline {- } & {Exabyte } & {-  } & {Exabyte VXA drives } & {-  } \\
  \hline {- } & {HP } & {Travan 4 } & {Colorado T4000S } & {-  } \\