#define DID0_VER(did0) ((did0 >> 28)&0x07)
-static int stellaris_read_part_info(struct flash_bank *bank);
-
+static void stellaris_read_clock_info(struct flash_bank *bank);
static int stellaris_mass_erase(struct flash_bank *bank);
static struct {
int printed, device_class;
struct stellaris_flash_bank *stellaris_info = bank->driver_priv;
- stellaris_read_part_info(bank);
-
if (stellaris_info->did1 == 0)
- {
- printed = snprintf(buf, buf_size, "Cannot identify target as a Stellaris\n");
- buf += printed;
- buf_size -= printed;
- return ERROR_FLASH_OPERATION_FAILED;
- }
+ return ERROR_FLASH_BANK_NOT_PROBED;
+
+ /* Read main and master clock freqency register */
+ stellaris_read_clock_info(bank);
if (DID0_VER(stellaris_info->did0) > 0)
{
fam = (did1 >> 24) & 0xF;
if (((ver != 0) && (ver != 1)) || (fam != 0))
{
- LOG_WARNING("Unknown did1 version/family, cannot positively identify target as a Stellaris");
+ LOG_WARNING("Unknown did1 version/family.");
+ return ERROR_FLASH_OPERATION_FAILED;
}
/* For Sandstorm, Fury, DustDevil: current data sheets say IOSC
default:
LOG_WARNING("Unknown did0 class");
}
- default:
break;
+ default:
LOG_WARNING("Unknown did0 version");
+ break;
}
for (i = 0; StellarisParts[i].partno; i++)
stellaris_info->num_lockbits = 1 + (stellaris_info->dc0 & 0xFFFF);
stellaris_info->num_pages = 2 *(1 + (stellaris_info->dc0 & 0xFFFF));
stellaris_info->pagesize = 1024;
- bank->size = 1024 * stellaris_info->num_pages;
stellaris_info->pages_in_lockregion = 2;
- /* provide this for the benefit of the higher flash driver layers */
- bank->num_sectors = stellaris_info->num_pages;
- bank->sectors = malloc(sizeof(struct flash_sector) * bank->num_sectors);
- for (i = 0; i < bank->num_sectors; i++)
- {
- bank->sectors[i].offset = i * stellaris_info->pagesize;
- bank->sectors[i].size = stellaris_info->pagesize;
- bank->sectors[i].is_erased = -1;
- bank->sectors[i].is_protected = -1;
- }
-
- /* Read main and master clock freqency register */
- stellaris_read_clock_info(bank);
-
return ERROR_OK;
}
unsigned page;
if (stellaris->did1 == 0)
- {
- status = stellaris_read_part_info(bank);
- if (status < 0)
- return status;
- }
+ return ERROR_FLASH_BANK_NOT_PROBED;
for (i = 0; i < (unsigned) bank->num_sectors; i++)
bank->sectors[i].is_protected = -1;
}
if (stellaris_info->did1 == 0)
- {
- stellaris_read_part_info(bank);
- }
-
- if (stellaris_info->did1 == 0)
- {
- LOG_WARNING("Cannot identify target as Stellaris");
- return ERROR_FLASH_OPERATION_FAILED;
- }
+ return ERROR_FLASH_BANK_NOT_PROBED;
if ((first < 0) || (last < first) || (last >= (int)stellaris_info->num_pages))
{
return ERROR_INVALID_ARGUMENTS;
}
+ if (stellaris_info->did1 == 0)
+ return ERROR_FLASH_BANK_NOT_PROBED;
+
/* lockregions are 2 pages ... must protect [even..odd] */
if ((first < 0) || (first & 1)
|| (last < first) || !(last & 1)
return ERROR_FLASH_SECTOR_INVALID;
}
- if (stellaris_info->did1 == 0)
- {
- stellaris_read_part_info(bank);
- }
-
- if (stellaris_info->did1 == 0)
- {
- LOG_WARNING("Cannot identify target as an Stellaris MCU");
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
/* Refresh flash controller timing */
stellaris_read_clock_info(bank);
stellaris_set_flash_timing(bank);
bank, buffer, offset, count);
if (stellaris_info->did1 == 0)
- {
- stellaris_read_part_info(bank);
- }
-
- if (stellaris_info->did1 == 0)
- {
- LOG_WARNING("Cannot identify target as a Stellaris processor");
- return ERROR_FLASH_OPERATION_FAILED;
- }
+ return ERROR_FLASH_BANK_NOT_PROBED;
if (offset & 0x3)
{
static int stellaris_probe(struct flash_bank *bank)
{
- /* we can't probe on an stellaris
- * if this is an stellaris, it has the configured flash
+ struct stellaris_flash_bank *stellaris_info = bank->driver_priv;
+ int retval;
+
+ /* If this is a stellaris chip, it has flash; probe() is just
+ * to figure out how much is present. Only do it once.
+ */
+ if (stellaris_info->did1 != 0)
+ return ERROR_OK;
+
+ /* stellaris_read_part_info() already handled error checking and
+ * reporting. Note that it doesn't write, so we don't care about
+ * whether the target is halted or not.
*/
+ retval = stellaris_read_part_info(bank);
+ if (retval != ERROR_OK)
+ return retval;
- if (bank->target->state != TARGET_HALTED)
+ /* provide this for the benefit of the NOR flash framework */
+ bank->size = 1024 * stellaris_info->num_pages;
+ bank->num_sectors = stellaris_info->num_pages;
+ bank->sectors = calloc(bank->num_sectors, sizeof(struct flash_sector));
+ for (int i = 0; i < bank->num_sectors; i++)
{
- LOG_ERROR("Target not halted");
- return ERROR_TARGET_NOT_HALTED;
+ bank->sectors[i].offset = i * stellaris_info->pagesize;
+ bank->sectors[i].size = stellaris_info->pagesize;
+ bank->sectors[i].is_erased = -1;
+ bank->sectors[i].is_protected = -1;
}
- /* stellaris_read_part_info() already takes care about error checking and reporting */
- return stellaris_read_part_info(bank);
-}
-
-static int stellaris_auto_probe(struct flash_bank *bank)
-{
- struct stellaris_flash_bank *stellaris_info = bank->driver_priv;
- if (stellaris_info->did1)
- return ERROR_OK;
- return stellaris_probe(bank);
+ return retval;
}
static int stellaris_mass_erase(struct flash_bank *bank)
}
if (stellaris_info->did1 == 0)
- {
- stellaris_read_part_info(bank);
- }
-
- if (stellaris_info->did1 == 0)
- {
- LOG_WARNING("Cannot identify target as Stellaris");
- return ERROR_FLASH_OPERATION_FAILED;
- }
+ return ERROR_FLASH_BANK_NOT_PROBED;
/* Refresh flash controller timing */
stellaris_read_clock_info(bank);
.protect = stellaris_protect,
.write = stellaris_write,
.probe = stellaris_probe,
- .auto_probe = stellaris_auto_probe,
+ .auto_probe = stellaris_probe,
.erase_check = default_flash_mem_blank_check,
.protect_check = stellaris_protect_check,
.info = stellaris_info,